FlowsBook a callSign inCreate free accountSign up
Site selection and expansion

A site shortlist in one afternoon: from twenty addresses to three

How an expansion team can go from a long list of candidate addresses to a defensible top three in a few hours, with the checks to run in order and what to leave for later.

Part of the guide AI employee for site selection

By the xMap team · · 4 min read

You can turn twenty candidate addresses into a shortlist of three in one afternoon if you run the same few checks on every one, in the same order, and cut at each step: first throw out what fails a hard rule, then count the competition, then the people around, then compare the survivors side by side. What one afternoon cannot give you is the rent, the lease terms or a feel for the street; those come after, on the three that survive.

This is for expansion managers, franchise developers and owners opening a second or third location. It lays out an afternoon hour by hour, the checks in order, a worked example, the shortcuts that backfire, and how to hand the routine to an AI employee so the next list takes minutes.

Before you start: write down the rules

Ten minutes of rules saves two hours of argument. Agree, in writing, what would rule a site out and what makes one better:

  • Hard rules: for example, no more than four direct competitors within 500 m, or at least a set number of residents within 1 km.
  • Ranking rules: what you prefer when two sites both pass, such as fewer chains nearby, a younger population, or a busier street.
  • The distance that matters: a walk for a café or a pharmacy, a short drive for a gym or a clinic.

xMap Flows cannot tell you the rent or the size of a unit: there is no rent data. Keep those in your own spreadsheet and bring them in at the end.

The afternoon, step by step

  1. 13:00, load the list. Put the twenty addresses in a sheet and upload it to My data. Rows without a position are placed from their address and city.
  2. 13:20, count the competition. Run Nearby places around each address, your kind of business within 500 m, with counts. Each site comes back with how many rivals, how many are chains, the nearest and its distance, and their average rating. Drop the sites that break your rule.
  3. 14:00, count the people. Run Demographics on the survivors, residents within 1 km with their age groups, or within a walking or driving area drawn by Travel area. Population figures exist in about 100 countries, not the United Kingdom or the United States; there, lean on competition and footfall.
  4. 14:45, add how busy the streets are. Mobility Footfall gives people-hours of presence around each site, the busiest hour and day. It arrives about 10 days late and is not available in Australia yet.
  5. 15:30, rank and cut to five. Sort by the rule that matters most, read the bottom of the list as carefully as the top, and keep five.
  6. 16:15, compare the last three side by side. In the app, Compare sites puts two or three spots in one table: people, rivals and how they are rated, road speed, nearby stations and parking, and a short verdict worked out from the table, with each site's weakest point.
  7. 17:00, write it down. One page: the three sites, the figures that separate them, and what still needs a visit.

A worked example

A made-up case: a bakery-café brand wants its fourth branch in Bangkok and has twenty addresses from brokers. The rule is no more than six bakeries and cafés within 500 m, and at least 15,000 residents within 1 km.

  • Competition removes seven addresses on busy café streets, leaving thirteen.
  • Population removes four in office districts where few people live, leaving nine. Office districts are not ruled out forever: the team notes that footfall there is high at lunchtime and keeps one as a wildcard.
  • Footfall and the competitors' ratings push the nine down to five: two sites have strong, well-rated rivals next door.
  • Compare sites on the last three shows one has the most residents per rival, one the busiest street, and one sits on a slow, jammed road that delivery riders would avoid.

The team leaves with two firm candidates and one wildcard, each with its numbers, ready for a visit and a rent quote. Every figure here is invented to show the process.

Shortcuts that backfire

  • Changing the rules after seeing a site you like. Write them down first and keep them.
  • A single number for everything. A score hides why a site lost. Keep the counts beside any score.
  • Treating residents as customers. People who live near a site are a pool, not a forecast. Daytime workers and visitors matter for many businesses.
  • Skipping the visit. Data finds the three sites worth seeing. It does not show the broken pavement or the empty units next door.

Handing the routine to an AI employee

Once the checks are agreed, one flow runs them on any new list:

  1. New rows: starts whenever addresses are added to the candidates table or sheet.
  2. Nearby places: rivals within 500 m, with counts.
  3. Demographics: residents within 1 km.
  4. Mobility Footfall: footfall and busy hours.
  5. Filter: your hard rules.
  6. xMap LLM: a score and one sentence per site, from the figures only.
  7. Email to the expansion team.

A broker's new address now comes back within minutes as one line: rivals and chains nearby, residents, the busiest hour, whether it passes the rules, and a score with its reason. Ready-made versions: Where to open next, Where to open my next cafe, Score every neighbourhood for a new branch and Competitor density around each site.

Questions

Can it tell me the rent at each address?

No. There is no rent data in xMap Flows. Bring rents and unit sizes from your own sheet or your broker.

How many sites can I check at once?

A flow can measure a whole table of candidates in one run; twenty addresses take minutes.

What if population data is missing for my country?

Rank on competition, ratings and footfall instead, and say so in your paper. Population figures are not available in the United Kingdom or the United States.

Is the verdict in Compare sites a decision?

No. It is worked out from the table and points out each site's weak point. The decision stays with your team, after a visit.

Templates that do this

Read next

More on site selection and expansion · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.