FlowsBook a callSign inCreate free accountSign up
Workflows by industry

How gas and power firms plan meter reading routes that readers can finish

Turning the day's due meters into one walkable or drivable round per reader: grouping by building, splitting by area, ordering stops, and logging no-access visits.

Part of the guide Workflow automation

By the xMap team · · 5 min read

To plan meter reading routes, take the meters due today from the billing cycle, group the ones that share a building, share the stops out between readers by area, and put each reader's stops in walking or driving order from where they start. Then send each reader their list with directions, and collect a check-in at every stop so no-access meters come back into tomorrow's plan instead of falling out of the cycle.

This is for metering supervisors and field planners at gas and electricity retailers, distribution companies and the contractors who read meters for them. It covers what makes a reading round different from other field work, a made-up day in Monterrey, the planning errors that leave meters unread, and how an AI employee in xMap Flows can prepare the rounds before readers clock in.

Why a reading round is not like other field visits

A repair crew does a handful of long jobs. A meter reader does many short ones, often a minute or two each, and the day is won or lost on the walking in between. Three things shape the round:

  • The cycle. Each meter is due in a window set by billing. Today's list is fixed by the cycle, not by priority, so the planner's job is order, not choice.
  • Density. In a block of flats, twenty meters may sit in one basement. In a suburb, each house is its own stop. The same reader can walk one area and drive the next.
  • Access. Locked gates, dogs, meters inside homes. Some stops fail every time, and the plan needs a way to bring them back on another day or at another hour.

Building a round, one decision at a time

  1. Export the due meters from the billing or metering system into a table: meter number, address or latitude and longitude, the cycle date and an access note if you hold one. A sheet in Google Sheets that the office already fills works well.
  2. Collapse meters at the same address into one stop and keep a count, before the list goes anywhere else. Twenty meters in one building should be one stop with twenty readings, not twenty stops.
  3. Share the stops between the readers on shift. Split by territory draws compact areas of about the same size for a number of readers or for the names you list, and marks each stop with its reader.
  4. Order each reader's stops with Route planner, one route for each reader, by car or on foot, from the depot or the reader's own start point.
  5. Send each reader the ordered list with a directions link for each part of the route, and ask for a check-in at every stop.

A worked example in Monterrey

The figures here are invented, to show the method. A distribution company's contractor in Monterrey has 610 meters due on a Tuesday, five readers on shift and two kinds of area: a dense centre of apartment blocks and newer suburbs to the south.

ReaderAreaMeters dueStops after groupingTravel mode
Reader 1Centre north14831Walking
Reader 2Centre south14128Walking
Reader 3South-west suburbs11248Car
Reader 4South-east suburbs10947Car
Reader 5Industrial east10039Car

Invented figures, for illustration only.

Grouping by address cut 610 meters to 193 stops, which is what made the day possible: Route planner orders up to 50 stops in a route, and every reader's list now fits. The two centre readers walk; the three suburban readers drive. By the afternoon, 27 stops were checked in as no access, 19 of them in the industrial east where gates close at lunch. The supervisor sets those for the next morning, first thing, before the gates shut.

Errors that leave meters unread

  • One stop per meter. A building of forty meters becomes forty stops at the same door, and the route looks impossible when it is not.
  • Reading drive times as the whole day. Route planner gives travel time between stops, on usual traffic. Time spent at each meter is not included: add your own minutes per reading.
  • Forgetting where readers start. If readers go straight from home, plan a route for each reader with their own start, not a shared depot.
  • Losing the no-access list. Without a check-in at each stop, a missed meter only shows up as an estimated bill weeks later.
  • Letting positions go missing. Stops with no position come out after the routes, and the step says how many. Fix addresses in the export instead of dropping meters quietly.

The reading plan as an AI employee

In xMap Flows the morning plan can be one AI employee. More examples of crews and rounds are on the field operations page. In order:

  1. Schedule: every weekday at 06:00, in the local time zone.
  2. My data with today's grouped stops, or New rows when the office adds them to a sheet.
  3. Filter to keep only today's cycle date, if the table holds several days.
  4. Split by territory with the names of today's readers.
  5. Route planner, one route for each reader, walking or by car.
  6. Traffic incidents around each stop, to flag a closed street before a reader finds it.
  7. Email to the supervisor with all rounds, and a message to each reader with their own stops in order.

What lands before the shift: the supervisor gets one email with every round, its stop count and travel time; each reader gets their list with directions links. During the day, readers check in at each stop from their phone with an outcome, a note and a photo of the meter if you want one, and the office sees the day fill in under Visits.

Questions

How many stops can one route hold?

Route planner orders up to 50 stops in a route. Group meters that share an address first, and most reading days fit comfortably.

Does the route follow real roads and footpaths?

Yes, when the routing service answers: routes are planned on the roads by car, on foot or by bike. If it cannot answer, the order is an estimate on straight lines, and the step and the email say so.

Can readers report no access from the field?

Yes. Each stop can be checked in from a phone with an outcome, a note and a photo, and the office sees the results under Visits.

Does it include time spent at each meter?

No. Travel times cover the trip between stops only. Add your own average minutes per reading when you judge whether a round fits a shift.

Templates that do this

IndustriesEnergy & EV

Read next

More on workflows by industry · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.