How ad agencies plan billboard buys around a client's new stores
Billboard planning near new stores: match each board to the nearest opening, measure how busy the street is, and send the client a shortlist they can approve.
Part of the guide Workflow automation
Good billboard planning near new stores starts from the stores, not from the media owner's rate card. For every board on offer, find the client's nearest opening and how far away it is, drop the boards that are too far to send anyone through the door, then rank the rest by how busy the street around them is and at what hour. The agency ends up with a short list of boards that sit on the way to a store, with a reason for each one, instead of a long list of sites that are simply big.
This is for media planners and account teams at agencies whose retail clients open several stores a year. It covers the three questions to answer for each board, a made-up worked example, the mistakes that waste a launch budget, and a flow that does the matching and measuring every time the client sends a new list of openings.
Three questions for every board
- Which store does it serve? A board three kilometres from the nearest new store is brand advertising, not launch advertising. Decide a distance that makes sense for the category (a coffee shop draws from a few hundred metres, a furniture store from much further) and keep only the boards inside it.
- How busy is the street, and when? Footfall around the board tells you how much presence there is on that spot, the busiest hour and the busiest day of the week. A board that peaks at 08:00 on weekdays suits a commuter message; one that peaks on Saturday afternoon suits an opening weekend offer.
- Who else is shouting there? The number of rival stores near the board matters. A board outside a rival's door can work as a challenge, or be wasted on people who already shop next door.
None of these needs a survey. The client already has the store addresses, the media owner already has the board positions, and the rest can be measured.
What footfall tells you, and what it does not
The Mobility Footfall block reports people-hours of presence around a point: someone who stands at a bus stop for twenty minutes counts for a third of an hour, someone who sits in a cafe for two hours counts twice. It is a measure of how busy a spot is, which is close to what a billboard buys, but it is not a count of people who saw the board, and it should not be sold to a client as impressions.
Each day's figures arrive about ten days later, so a planning run in mid-November describes late October and early November. That is fine for comparing boards with each other, which is the job here. There is no footfall data for Australia yet, so an agency planning a launch in Sydney or Melbourne has to rank boards on distance and rivals alone.
A worked example, made up
Say a sportswear client is opening four stores in Toronto next spring, and the media owner has offered 60 roadside and transit boards across the city. The planner asks one question: which 12 boards should we buy for the four opening weekends?
- The 60 boards go into a table with their names and positions. The four store addresses go into another.
- For each board, the nearest store and its distance are found. 23 boards are within 1.5 km of a new store; the other 37 are set aside.
- For the 23, footfall over the last 30 days is measured within 200 m: people-hours a day, the busiest hour and the busiest day.
- Sports and shoe stores within 500 m of each board are counted, to flag boards that sit beside a rival.
- The 23 are ranked, and the top three for each store go to the client with one line of reasoning each.
In this invented case, the planner finds that one store has five candidate boards but all of them peak at commuting hours, while its opening is on a Saturday. That changes the creative brief for that store, not just the buy.
For context on the city, xMap's places database lists 2,125 restaurants within 10 km of the centre of Toronto (November 2026), a reminder of how crowded a city-centre street is with things competing for attention. That is a count of places, not of boards, and it says nothing about any one board.
Mistakes that waste a launch budget
- Buying the biggest boards in the city and hoping they are near a store. Size without proximity builds awareness for a brand that has no shop nearby yet.
- Using a straight-line distance as if it were a walk. Find nearest measures distance as the crow flies; a board across a motorway or a river from the store is closer on the map than on foot. Check the shortlist on a map before it goes to the client.
- Ranking on one day's figures. Use 30 days of footfall so that a single event or a rainy week does not decide the buy.
- Calling people-hours an audience. Present them as a busyness score for comparing boards.
- Forgetting the stores that open later. Run the comparison again when the client confirms each new opening, rather than planning a whole year in January.
Doing it with an AI employee
An AI employee in xMap Flows can do the matching, measuring and ranking each time the client sends a new store list. Agencies that run this for several clients usually keep one flow per client; the AI employees for agencies page explains how they share and brand the results.
- My data: the media owner's boards, uploaded as a table with latitude and longitude.
- Find nearest: the client's new stores from a second table, with the short word store, so each board gets store_name and store_km. Set the farthest distance to 1.5 km so boards beyond it get no match.
- Filter: keep only boards that matched a store.
- Mobility Footfall: footfall, busy hours and busiest days, the last 30 days, 200 m around each board. It measures up to 50 places a run, so keep the list to that size or split it by store.
- Nearby places: sportswear and shoe stores within 500 m of each board, passed on as a count.
- xMap LLM: rank the boards for each store from the distance, the footfall, the busiest hour and the rival count, and write one sentence of reasoning per board.
- Make a report: a PDF with the agency's logo, the map and the ranked list, emailed to the account team to check before it goes to the client.
What lands in the inbox is a short PDF per client: the boards near each store, how busy each spot is and when, and why the top ones were picked. The planner adds the rates and sends it on.
Questions
Can footfall replace the media owner's audience figures?
No. Footfall is people-hours of presence around a point, measured for comparing places. Use it to rank boards against each other, and keep the media owner's figures for the contract.
How far from a store should a launch board be?
It depends on the category. A cafe or convenience store draws from a short walk, a large format store from a drive. Pick a distance per client and set it as the farthest distance in Find nearest.
Does this work for transit and indoor screens too?
Yes, as long as each screen has a position. A screen inside a station or a mall is measured the same way, by the presence around its point.
What about launches in Australia?
Footfall data does not cover Australia yet. Boards there can still be ranked by distance to the new store and by the rivals around them.