FlowsBook a callSign inCreate free accountSign up
Workflows by industry

How event organisers pick venues that guests can actually reach

Judge a venue by how guests arrive: the drive-time area around it, stations within a short walk, parking nearby and how the roads move at the hour doors open.

Part of the guide Workflow automation

By the xMap team · · 7 min read

A venue has good access when most guests can reach it in reasonable time by the way they will really travel, and when the last few hundred metres do not undo it. In practice that means four checks for each candidate: the area a car reaches within 15 minutes, the train, subway and bus stops within an easy walk, the car parks close by, and how the surrounding roads move at the hour your doors open. Weigh them against your own guest list, not against a rule of thumb.

This article is for event and conference organisers, wedding planners and venue sales teams who shortlist halls, hotels and outdoor sites. It covers what each check tells you, a worked example with three made-up venues, where organisers go wrong, and how an AI employee in xMap Flows can run the checks for every venue on a list and send the comparison by email.

Start from how your guests will arrive

A product launch for local press, a trade fair for exhibitors with vans, and a wedding with older relatives all have different guests. Before comparing venues, write down roughly how your guests will come: mostly by car, mostly by train or bus, mostly on foot from nearby hotels, or a mix. The answer decides which check carries the most weight.

  • Mostly by car: the drive-time area and parking matter most, then the roads at arrival time.
  • Mostly by public transport: the stops within a 10-minute walk matter most, and whether the walk is direct.
  • Mostly from hotels: the hotels within a short walk or a short ride, and the walking area around the venue.
  • Suppliers and crew: a loading area and roads that are not closed for works on build day.

The four access checks, and how to read them

The area a car reaches

A circle on a map is a poor stand-in for access: a venue beside a river or a ring road may have a wide circle but a narrow real reach. The Travel area block draws the area that can be reached along the roads, by car, by bike or on foot, up to 15 minutes or 10 km by road for now. Its travel times are for usual traffic, not the traffic at the moment it runs, so treat it as the venue's normal reach. Compare the shapes side by side: a venue whose 15-minute area covers the business district and two motorway junctions serves car guests better than one boxed in by water.

Stops within an easy walk

Most guests will not walk more than ten minutes from a station in event clothes. Put Nearby places around each venue with the types Train station, Subway station and Bus station, set to count within 500 m or 1 km, and each venue comes back with how many stops are close and how far the nearest one is. A count of zero within 1 km is a warning for any event that relies on public transport. Note what it does not tell you: how often trains run, or whether the line runs late enough for an evening event. Check the timetable of the nearest station yourself.

Parking close by

The same block counts Parking lot and Parking garage around each venue and gives the nearest one with its distance. It does not know how many spaces a car park has or what it costs, so a count tells you whether parking exists nearby, not whether it will hold three hundred cars. For a large event, use the count to pick the venues worth a phone call, then ask the car park operators about capacity and event-day rates.

The roads at the hour doors open

Traffic Flow measures how traffic is moving on the roads around a place at the moment it runs: the current speed, the speed when the roads are free, a jam factor from 0 to 10 and the busiest road. It does not count cars. Run it at the hour guests would arrive, on the same weekday as your event, for a week or two before you decide. A venue whose roads sit at a jam factor of 6 every Thursday at 18:30 will make an evening conference start late. Closer to the date, Traffic incidents lists closures and roadworks near the venue so you can warn guests.

A worked example: three venues in Lisbon

The figures in this example are made up to show how the checks combine. A conference organiser expects 400 guests for a two-day event, about half arriving by metro, a third by car and the rest on foot from hotels. Three venues are on the shortlist.

CheckRiverside hallOld town palaceBusiness park centre
15-minute drive areaNarrow, cut by the riverWide, but slow streetsWide, two motorway junctions
Metro and train stops within 500 m130
Car parks within 500 m214
Jam factor at 08:30, average of five weekdays3.16.44.0

A made-up example of the four access checks for three venues.

On paper the business park has the best drive area and the most parking, but no stop within 500 m: the half of the guests who come by metro would need a shuttle. The palace has the most stops, but its streets are among the slowest at 08:30, which hurts the third who drive. The riverside hall is the balanced choice for this guest mix: one stop close by, some parking and the calmest roads at arrival time. Had the guests been mostly drivers, the business park would win.

Mistakes organisers make

  • Checking access on a Sunday afternoon for a Tuesday morning event. Live speeds depend on the hour and the day; measure at the hour that matters.
  • Counting a station as close because it is near as the crow flies. Use the walking area, so a station across a motorway with no bridge does not count.
  • Treating a parking count as capacity. A count says a car park exists, not that it has room.
  • Forgetting crew and suppliers. A venue easy for guests can still be hard for a truck at 06:00 if the only access road is under works.
  • Deciding once and never looking again. Roadworks and closures appear between booking and the event; keep watching the roads near the date.

Doing it with an AI employee

An AI employee in xMap Flows can run every check for each venue on your shortlist and send one comparison, then keep watching the chosen venue until the day. Two flows do it.

  1. Put your shortlist in a table in My data: the venue's name and address, one row each.
  2. Add Nearby places set to Each incoming place, with counts, with the types Train station, Subway station and Bus station within 500 m, then a second Nearby places for Parking lot and Parking garage.
  3. Add Traffic Flow with Adjacent roads, and schedule the flow with Schedule for the weekdays and hour your guests will arrive.
  4. Add xMap LLM with your guest mix in the instructions, asking it to rank the venues and give a reason that cites the counts and speeds.
  5. End with Email, or Make a report for a PDF you can forward to the client.

What lands in your inbox each run is one email with every venue as a row: the stops and car parks within walking distance, the nearest of each and how far, the speed and jam factor at that hour, and the AI's ranking with a one-line reason. Once the venue is booked, a second employee built from the template for road closures around the venue sends guests a travel note on the day, and the event-day weather template asks you to approve plan B if rain is coming.

Questions

What makes an event venue accessible?

Guests can reach it in reasonable time by the way they really travel, with stops within an easy walk for those on public transport, parking close by for drivers and roads that are not jammed at arrival time.

How close should a station be to a venue?

Within about a 10-minute walk, roughly 500 m to 800 m, for most guests in event clothes. Measure the walk along the streets rather than in a straight line.

Can xMap Flows tell me how many parking spaces a car park has?

No. Nearby places counts the car parks around a venue and gives the nearest one with its distance, but not the number of spaces or the prices. Ask the operators for those.

Does Traffic Flow count how many cars pass a venue?

No. It measures how fast traffic is moving and how jammed the roads are at the moment the flow runs, which is what matters for arrival times.

How do I warn guests about road closures on the day?

Run Traffic incidents around the venue on the morning of the event and send the closures it finds by email or to a chat channel, so the guest team can pass them on.

Templates that do this

Read next

More on workflows by industry · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.