A Dubai billboard traffic count, hour by hour, that a media buyer can check
Build a Dubai billboard traffic count from cars counted on the road in front of each board, by hour and direction, and pair it with live speeds at the hours you sell.
Part of the guide Location intelligence automation
A Dubai billboard traffic count you can defend starts with cars counted on the road in front of the board, hour by hour, from xMap's road traffic history for the United Arab Emirates, which goes back to January 2021. For each board you get the cars a day in both directions, the cars in each direction, the busiest hour and day, and how fast traffic moves at the rush. Add how slow the road is at the hours you sell, and the rate card rests on numbers a buyer can check rather than on the word "prime".
This is for sales teams at outdoor media owners, planners at agencies buying roadside boards in the emirate, and brand teams that want to compare two quotes. It covers which road the count really describes, how to turn counts into a sales sheet, a made-up example of two boards, what the data cannot claim, and an AI employee that refreshes every board's sheet each month. The data covers roads in the UAE only; elsewhere, live road speeds are the tool.
Which road the count describes
The Regional data block, on Road traffic history, finds the nearest road of each of five road classes within 500 m of the board's position and calls the busiest named one the main road. A board on a gantry over a highway is easy. A board beside a slip road, an interchange or a mall access road is not: the main road may be the highway a hundred metres away, which the board does not face.
- Record each board's exact position and the direction its face looks, in a table in My data.
- Run Totals for each place over the last 12 months, with Roads set to Every road nearby, so each road near the board comes back as its own row.
- Keep the row for the road the face actually reads from, and note its distance in road_m.
- Use cars_by_direction to keep only the direction that faces the board.
From counts to a sales sheet
Buyers ask the same questions board after board: how many cars, when, and can drivers actually read it. Each has a field.
- Volume: cars a day on the facing direction, over a stated period.
- When: the busiest hour and day, and an hourly profile from Hour by hour rows, so a breakfast brand can buy mornings and a restaurant evenings.
- Dwell: the speed at the busiest hour and the slowest hour from the counts, and, for the hours you sell, the live speed and jam factor from Traffic Flow measured at those times over a few weeks. A board on a road crawling at 25 km/h is in view far longer than one passed at 100.
- Direction of growth: month by month since 2021 shows whether the road is gaining traffic as new districts fill.
A made-up comparison of two boards
The figures are invented. A media owner sells two boards to a car brand. Board A stands on a gantry over a main highway: its facing direction carries about 95,000 cars a day, busiest at 07:00, with traffic moving fast for most of the day. Board B sits on an urban road near Business Bay: about 38,000 cars a day in its direction, but the road slows below 30 km/h from 17:00 to 19:00 most weekdays.
| Board (made up) | Cars a day, facing direction | Busiest hour | Speed at the busiest hour | Slow hours |
|---|---|---|---|---|
| A, highway gantry | 95,000 | 07:00 | 74 km/h | None below 50 km/h |
| B, urban road | 38,000 | 18:00 | 24 km/h | 17:00 to 19:00 |
Invented figures to show how two boards are compared on volume and on speed.
The brand buys A for reach and B for the evening, when drivers sit in view of a detailed message about a test drive offer. Without speed, B would have looked like the weaker board.
What a traffic count cannot claim
- Cars are not people. A count says how many cars passed. Occupancy, attention and recall are other questions.
- It is not visibility. Trees, other boards, a bend in the road or the angle of the face decide whether a passing car can see the board. Check on site.
- It is not live. Counts run up to a few days ago. Live speeds tell you about the moment they were measured, not about cars counted.
- It covers roads in the UAE. For boards in other countries, live speeds and the jam factor are what the data offers, with no car counts.
- Say the period. "95,000 cars a day" means little without "over the last 12 months, facing direction".
An AI employee that keeps every board's sheet current
Rate cards go stale when roads change. In xMap Flows an AI employee can rebuild the sheet for every board each month. The site side of this work is described on the AI employee for site selection.
- Schedule: the second day of each month.
- My data: your boards, with position, facing direction and the road each reads from.
- Regional data: Road traffic history, last 12 months, Totals for each place, Every road nearby.
- Filter: keep the row whose road_name matches the board's road.
- Calculated field: the facing-direction share of cars a day, written once as a formula.
- Make a report: one page per board with your logo, emailed to the sales team.
A separate flow on weekdays at 08:00 and 18:00 adds Traffic Flow readings for each board to a sheet, which builds the dwell evidence for the hours you sell. Together they give every board a sheet that is fresh, checkable and specific.
Questions
How many cars pass a billboard on Sheikh Zayed Road?
It depends on the stretch and the direction. Place the board's position in Road traffic history and read cars_per_day and cars_by_direction for the road it faces.
Are the counts for one direction or both?
cars_per_day adds both directions; cars_by_direction splits them as cars a day. Hourly rows add both directions together.
Can I get counts for boards in Abu Dhabi or Sharjah?
Yes. Road traffic history covers roads across the United Arab Emirates, not only Dubai.
Does it measure how many people saw the board?
No. It counts cars on the road. Visibility, occupancy and attention need other evidence, such as a site visit or a campaign study.