FlowsBook a callSign inCreate free accountSign up
Footfall and mobility

Foot traffic data for advertising: posters, sampling teams and pop-ups

Use footfall per day and the busiest hours to pick where posters go, where a sampling team stands and when a pop-up opens, and say honestly what the figures measure.

Part of the guide Location intelligence automation

By the xMap team · · 5 min read

Foot traffic data for advertising helps with three different choices: which spots get a poster, where and when a sampling team should stand, and which week a pop-up should open. In each case you compare candidate places by their footfall per day and their busiest hours, then match the channel to the pattern: a poster wants many hours of presence all week, a sampling team wants a sharp peak it can staff, a pop-up wants a strong weekend. The figures are people-hours of presence, not people who saw anything, and each day arrives about ten days late, so plan bookings around that delay.

This guide is for brand managers, field marketing leads and agency planners who already have a list of possible locations and need to choose between them with something firmer than instinct.

What the numbers can and cannot carry

Mobility Footfall adds up how long people are present around a point. One person waiting twenty minutes for a bus adds a third of a people-hour; a shopper who stays three hours adds three. The block gives each place its average day (footfall_daily), its busiest hour and the size of that hour, how the day splits between morning, midday, evening and late night, the busiest and quietest day of the week, and a trend of the last week against the one before.

It does not count unique visitors, impressions, people who noticed a poster or people who bought. It is an aggregate scaled from a panel of devices to the whole population. That makes it good for ranking spots against each other and for timing, and wrong for promising a reach figure to a client. A plain explanation of the unit is in what footfall measures.

Three channels, three patterns

ChannelWhat to look forFields to use
Posters and street panelsHigh presence across most of the week; a long, flat day beats one spikefootfall_daily, footfall_by_part, quietest_day
Sampling teamsA clear peak hour on a known day, so a small crew meets the most people in a short shiftfootfall_peak_hour, footfall_peak, busiest_day
Pop-up stands and storesStrong weekends and evenings, plus a trend that is not fallingWeekends only figures, footfall_trend

A rule of thumb; your own sales results should overrule it.

The same street corner can be a good poster site and a poor sampling spot. A station exit with steady traffic from six to midnight suits a poster that is paid for by the week. A park entrance that is quiet on weekdays and packed on Sunday afternoons wastes a poster for five days but can be perfect for a two-hour tasting.

Living with the ten-day delay

Each day's footfall becomes available about ten days after it happens. For most campaign planning that is fine, because sites are booked weeks ahead and the pattern of a place changes slowly. It does matter in two cases. First, you cannot use footfall to check last weekend's activation; read your own sales and team reports for that, then confirm with footfall once the days arrive. Second, xMap's footfall history only begins in mid-October 2026, so there is no year-ago comparison for a seasonal campaign yet. Measure this season properly and next year you will have one.

Coverage is most of the world, with one notable gap: there is no footfall data in Australia yet. A place with no data says so rather than showing zero.

A made-up example: launching a drink in Mexico City

The numbers here are invented to show the method. A drinks brand has six candidate spots for a two-week launch and a budget for four posters, one sampling crew and a single weekend pop-up.

SpotFootfall a dayBusiest hourBusiest dayWeekend vs weekday
Metro exit, business district52,00008:00Wednesdaymuch lower
Market street38,00013:00Saturdayhigher
University gate29,00011:00Tuesdaymuch lower
Park entrance21,00017:00Sundayfar higher
Shopping centre forecourt44,00019:00Saturdayhigher
Bus interchange47,00018:00Mondaysimilar

Invented figures for illustration only.

Posters go to the metro exit, the bus interchange, the shopping centre forecourt and the market street: high, steady presence. The sampling crew works the university gate late morning on Tuesdays and Thursdays, a short, intense window. The pop-up takes the park entrance for a weekend, where Sunday afternoon is the peak. The brand writes down this plan and the reasons, so when sales come in it can tell which assumption held.

Mistakes that cost money

  • Quoting people-hours as reach. It is presence, not audience. Say so on every slide.
  • A circle wider than the place. For a poster, 50 to 200 m around the panel; at 500 m you are counting people round the corner who never pass it.
  • Booking from one week. A festival or roadworks can distort seven days. Use a month where you can.
  • Expecting live numbers. The latest days are about ten days old. Plan, then verify.
  • Comparing against last year. There is no history before mid-October 2026.

Let an AI employee shortlist the spots

In xMap Flows, a monthly AI employee can keep a ranked list of every location you might use, so planners start from current figures rather than an old spreadsheet. This is part of location intelligence automation.

  1. Start with Schedule, monthly.
  2. List the candidate spots in My data, with a column for the channel you have in mind.
  3. Add Mobility Footfall: Footfall, Busy hours and Busiest days, 100 m, the last 30 days.
  4. Add Weather forecast if outdoor sampling is planned in the next two weeks.
  5. Add xMap LLM: suggest poster, sampling or pop-up for each spot from its pattern, in one line, and never call footfall an audience.
  6. Finish with Email or Make a report to the field marketing team.

In the inbox: a list of spots with their daily footfall, peak hour, busiest day and a suggested channel with its reason. The sampling day, next pop-up store and next billboard templates are ready-made versions to adapt.

Questions

Can footfall tell me how many people will see my advert?

No. It measures time people spend in the area, not attention. Use it to rank spots and pick hours, and measure response with your own codes or sales.

Is footfall live enough to move a sampling team tomorrow?

No. Each day arrives about ten days later. Use the pattern of a place, which changes slowly, and the weather forecast for the short term.

What radius should I use for a sampling spot?

Use the smallest setting, 200 m or less, which reads the spot's own hexagon of about 0.1 km². Wider circles add streets your crew will never reach.

Can I compare this Christmas with last Christmas?

Not yet. Footfall history starts in mid-October 2026, so this season becomes your first baseline.

Templates that do this

Read next

More on footfall and mobility · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.