FlowsBook a callSign inCreate free accountSign up
Roads and traffic

Cairo traffic delivery planning: live speeds and incidents for the vans

Cairo traffic delivery planning with live road speeds and closures around each hub: when to dispatch, which zones to hold, and how the Friday and Saturday weekend changes it.

Part of the guide Location intelligence automation

By the xMap team · · 5 min read

Good Cairo traffic delivery planning rests on a status board that dispatch can trust: for each hub and each delivery zone, how fast the roads are moving now, how far from normal that is, and whether a closure or roadworks cuts the way in. Refresh it every half hour through the morning, log it for a few weeks, and you learn each zone's calm windows. Then dispatch by zone, not by the clock, and plan the week around the Friday and Saturday weekend rather than against it.

It is written for dispatch leads at grocery, pharmacy and parcel fleets, restaurant groups running their own riders, and distributors that serve shops from Nasr City to Sheikh Zayed City. It covers the readings, how to turn them into a dispatch rule, a made-up week for a pharmacy distributor, the limits, and an AI employee that keeps the board up to date.

The two readings dispatch needs

Road speeds right now. Traffic Flow measures the roads around each place when the flow runs: the current speed, the free-flow speed, a jam factor from 0 (free) to 10 (standstill or closed), congestion as a percentage, the level in words and the busiest road. Put a place at each hub's gate and at the heart of each zone, and you have a speed reading for every part of the operation. It gives speeds, not car counts, and it describes the present, not the next hour.

What is blocking the way. Traffic incidents lists road closures, roadworks and other incidents from online maps, with street and district. Search a city, or the area each hub covers: a Travel area of 15 minutes by car around each hub hands the incident search a shape that follows the roads, so the drivers hear about closures on their own patch and not across the river.

From a reading to a dispatch rule

A board is only useful when it ends in a decision. Most fleets settle on a simple rule per zone, written down so every dispatcher applies it the same way.

  1. Log the jam factor at each zone point every 30 minutes from 06:30 to 11:00 for three or four weeks, weekdays and weekends apart.
  2. For each zone, find the first half hour when the reading usually drops below 4. That is its usual calm window.
  3. Set the rule: a van for that zone leaves when the live reading is under 4, or at the calm window, whichever comes first.
  4. Add one override: any closure inside the zone's travel area goes to the dispatcher before the van leaves, with the street name.
  5. Review the rule each month, and again when a new bridge, flyover or ring road section opens.

A made-up week for a pharmacy distributor

Everything here is invented. A distributor runs two hubs, one in Nasr City and one in 6th of October City, and serves about 300 pharmacies. After three weeks of half-hourly readings, the picture is clear. Zones east of the Nasr City hub stay Heavy until about 10:00 on Sunday to Thursday, while the routes towards Heliopolis ease by 09:30. Zones served from 6th of October are Light early and then jam on the ring road approach after 08:00. On Fridays almost every zone reads Free flowing until midday.

Zone (made up)Usual calm window, weekdaysFriday morningRule
Nasr City east10:00Free flowingLeave at 10:00, or earlier if under 4
Heliopolis09:30Free flowingLeave at 09:30
6th of October, innerBefore 08:00Free flowingLeave at 07:15
Ring road approachAfter 11:00LightMid-morning only, or Friday

Invented readings to show how a calm window becomes a dispatch rule.

The distributor moves its bulkiest weekly restock for the ring road zones to Friday mornings, when roads are clear and many pharmacies open later in the day, and keeps the daily urgent runs on the weekday rules. One closure alert in the first week, a roadworks site on a main street in Maadi, saves a van a long detour because the driver hears about it before leaving.

What the data will not do

  • It will not predict. A live reading tells you about this moment. Patterns come from logging it over weeks.
  • It does not count vehicles. Speed and jam factor are the measures; there is no number of cars on the 6th of October Bridge.
  • It does not see inside a compound. A delay at a mall's loading bay or a pharmacy's narrow street is the driver's knowledge, not the data's.
  • Travel areas have limits. They reach up to 15 minutes by car for now, and their times are for usual traffic. Use them to say which closures matter to a hub, not to promise arrival times.
  • Points need care. A zone point on a highway reads the highway. Put it on the streets the vans actually use to reach the shops.

An AI employee for the morning board

In xMap Flows the board runs itself and posts where dispatch already looks. The approach is described on the AI employee for field operations page.

  1. Schedule: every 30 minutes, 06:30 to 11:00, Africa/Cairo, every day.
  2. My data: hub gates and zone points, each with its hub.
  3. Traffic Flow: roads within 500 m of each point.
  4. Travel area and Traffic incidents: closures and roadworks inside each hub's 15-minute area, with Only new so each incident is announced once.
  5. Branch: zones under jam factor 4 go to the Leave now list, the rest to Hold.
  6. Email or a message to the dispatch channel with both lists and any new closure; each run also adds a row to a sheet, which becomes the log.

Dispatch sees, every half hour, which zones can go and which wait, with the busiest road and the street of any new closure. The sheet it fills is the record the monthly rule review reads from.

Questions

Which days are quietest on Cairo roads?

Friday mornings are usually the calmest, as Friday and Saturday are the weekend. Check it with a few weeks of your own readings, since each zone behaves differently.

Can I get car counts for Cairo roads?

No. Traffic Flow gives live speeds, the jam factor and closed roads. Counted cars by hour exist only for roads in the United Arab Emirates.

How often should the board refresh?

Every 30 minutes through the dispatch window is a good balance. Each reading is a snapshot of the roads at that moment.

Will drivers get every incident in the city?

Only those inside their hub's travel area if you set it up that way, and with Only new each one is announced once while it lasts.

Templates that do this

Read next

More on roads and traffic · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.