FlowsBook a callSign inCreate free accountSign up
Site selection and expansion

How to choose a store location using your best store as the yardstick

How to choose a store location: describe what makes your best store work, measure it, then look for districts and units that match. A method with a worked example.

Part of the guide AI employee for site selection

By the xMap team · · 5 min read

If you are working out how to choose a store location, start from the store you already have that works best. Write down what surrounds it: how many people live within the distance your customers travel, which shops and offices bring people past, how many competitors trade nearby and how good they are, and how people arrive. Then measure those same things around every candidate and keep the ones that look most like your best store. A new location rarely fails because a number was low; it fails because it was chosen on a feeling about a street rather than on what made the first shop succeed.

This is for owners of one to twenty shops: a bakery, an optician, a pet shop, a phone repair counter, a homeware boutique. It covers turning your best store into a profile, narrowing a city to a few districts, judging the unit itself, a worked example in Lyon, and the mistakes that cost the most.

Step one: describe your best store in numbers

Pick the shop with the strongest sales per square metre, not simply the biggest. Then answer five questions about it, with figures where you can.

  1. How far do customers come? Ask at the till for a week, or use postcodes from your loyalty or delivery data. In a city centre it may be a 10-minute walk; in a suburb a 10-minute drive.
  2. How many people live inside that distance? In countries with population data, a count of residents in that walking or driving area gives you a baseline.
  3. What brings people past? A supermarket, a station, a school gate, offices, a gym. List the anchors within a few hundred metres.
  4. Who competes? Count the shops selling what you sell inside the customer distance, and note their ratings.
  5. How do people arrive? On foot, by car, by tram. Parking or a stop at the door may matter more than the rent.

The answers are your yardstick. A candidate does not need to match every one, but you should know which ones it misses and why you think it will work anyway.

Step two: narrow the city to a few districts

Before looking at any unit, rank the districts. For each one, count the same things you measured around your best store: residents where data exists, anchors, competitors and their average rating. Districts with enough people, the anchors your customers use and few or weak competitors go on the shortlist. A city of thirty districts usually comes down to three or four worth walking.

Step three: judge the unit, then visit

Inside a good district, units still differ a lot. Check which side of the street gets the foot traffic, whether the anchor is on your block or across a main road, how far the nearest stop or car park is, and whether the frontage is visible from where people walk. Data cannot see a dark shopfront, a broken pavement or a landlord's plans for the building next door, so every shortlisted unit needs a visit at the hour you expect to be busiest.

A worked example in Lyon

This example is made up. A family runs two bakeries in Lyon. The stronger one sits in a residential district with about 18,000 residents within a 10-minute walk, a supermarket and a primary school within 300 metres, and three other bakeries nearby rated around 4.2. Most customers walk in before 9:00.

They measure four candidate districts the same way. One has more residents but seven bakeries, two of them rated 4.7. Another has the school and the supermarket but only 9,000 residents in walking distance. The third looks like the best store on almost every line: about 16,000 residents, a supermarket, two schools and two bakeries rated under 4. They walk it at 7:30 on two weekdays, find a unit on the school route with a free frontage, and make an offer there. The fourth district stays on the list for later.

Mistakes to avoid

  • Choosing the cheapest rent. A unit is often cheap because few people pass it. Compare rent with what the location brings, not with other rents.
  • Drawing one circle for every store. A walk-in shop and a destination shop have very different reach. Measure the distance your customers really travel.
  • Counting competitors by name only. A supermarket bakery counter competes with a bakery; a wedding cake studio may not. Decide what really competes.
  • Opening too close to your own shop. If the two walking areas overlap, the new one partly takes customers from the old one.
  • Skipping the visit. Numbers shortlist; your eyes decide.

Doing the measuring with an AI employee

In xMap Flows an AI employee can measure your best store and every candidate the same way and send you the comparison. It is one of the jobs in the site selection guide.

  1. My data: a table with your best store and the candidate addresses.
  2. Travel area: a 10-minute walk or drive around each, whichever your customers use.
  3. Demographics: residents in each area, where the country has population data.
  4. Nearby places in counting mode: your competitors inside each area with their average rating, and a second count for anchors such as supermarkets and schools.
  5. xMap LLM: compare each candidate with the best store line by line and score how closely it matches, with the lines it misses.
  6. Email the table, or Make a report for a partner or the bank.

The template score every neighbourhood for a new branch does the district ranking for a whole city; where to open next and, for cafes, where to open my next cafe start from a shortlist. For two or three finalists, Compare sites puts them side by side in one table.

Questions

What matters most when choosing a store location?

Enough of the right people within the distance your customers really travel, a reason for them to pass, and competition that leaves room. Rent and visibility matter, but only after those.

How many locations should I look at before choosing?

Rank every district first, walk three or four, and compare two or three units in detail. Fewer and you may miss a better option; many more and you rarely learn anything new.

Can I use this method if I only have one store?

Yes. Your only store is your best store. If it struggles, describe what you think its location lacks and look for the opposite.

Is population data available everywhere?

No. It covers about 100 countries, including France, Canada, India and Australia, but not the United Kingdom or the United States. Elsewhere, compare places and competitors only.

Templates that do this

Read next

More on site selection and expansion · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.