How airport retail teams read the passenger areas around a terminal
Concession and retail teams at airports can read how busy each terminal zone is by hour, which shops and cafes already trade nearby, and where a new unit would sit best.
Part of the guide Workflow automation
An airport retail team reads a passenger area with two layers: how busy the zone is through the day, measured as footfall in people-hours, and what already trades there, from a list of the shops, cafes, lounges and services inside and just outside the terminal. Put the two side by side for each zone and you can see where travellers linger with little to buy, and where a new unit would only share a crowd that is already served.
This article is for concession managers, commercial teams at airport operators, and brands bidding for a unit in a terminal. It explains what each layer can and cannot show inside a building, walks through an invented example, lists the traps, and ends with an AI employee that refreshes the picture every month.
Why a terminal is harder to read than a high street
On a high street, the people walking past a shop are mostly the people who might buy. In a terminal the crowd is split in ways the map does not show: departures and arrivals, before and after security, domestic and international piers, and a large population of staff who are present all day but rarely buy a souvenir. A passenger area that looks crowded on a footfall map may be a baggage hall where nobody stops.
So the data gives you a frame, and your own knowledge of the building fills it in. Keep both in mind as you read the rest.
- Footfall is people-hours of presence. Mobility Footfall adds up how long people spend in the cells of the map around a point. Someone who waits three hours at a gate counts three times. That suits airports well, because dwell time is what turns a traveller into a customer, but it is not a count of passengers.
- Cells are about 0.1 km2. Up to a 200 m radius the block reads one hexagon of the map; wider, every hexagon whose middle falls inside the circle. It cannot tell one floor from another, or the airside of a wall from the landside.
- Each day arrives about ten days late. Use it for planning, rents and bids, not for today's staffing.
- Coverage is most of the world, not yet Australia. Check a terminal returns figures before you build a bid around it.
The two layers, zone by zone
Start by naming the zones you care about as points: the landside arrivals hall, the main departures concourse after security, each pier, the car park walkway, the transit station link. Put each point at the middle of its zone so the hexagon it reads is mostly the zone itself.
- For each zone, read the daily footfall, the busiest hour, the busiest and quietest day, and how the day splits between morning, midday, evening and late night (footfall_by_part).
- For the same points, list what already trades within 300 m with Nearby places: cafes, restaurants, convenience stores, pharmacies, bookshops, currency exchange, car rental desks. Each place comes with its rating, its brand and whether it belongs to a chain.
- Count the offer per zone: how many places to eat, how many to shop, how many are open late. The counting mode of Nearby places gives each zone a count and an average rating.
- Compare the shape of the day with the offer. A zone whose busiest hours are before 7 am needs breakfast and coffee open early. A zone busy late at night with only one open unit is a gap.
An invented example at a large hub
The figures below are made up to show the reasoning. A brand that sells healthy breakfasts is bidding for one unit at a busy hub in Mexico City and is offered three locations.
| Zone (made up) | Footfall share before 9 am | Busiest hour | Places to eat within 300 m | Open after 10 pm |
|---|---|---|---|---|
| Landside arrivals hall | Low | 21:00 | 11 | 4 |
| Pier B after security | High | 06:00 | 3 | 1 |
| Car park walkway | Medium | 08:00 | 1 | 0 |
Illustrative figures only, not measured.
The arrivals hall is the busiest overall but its crowd peaks in the evening and already has eleven places to eat. The car park walkway has almost no competition, yet people move through it with luggage and rarely stop. Pier B is the interesting one: most of its presence is early, its people are waiting at gates, and only three places feed them. For a breakfast brand, that is the unit to bid for, and the morning share is the line to quote in the bid.
The team would still walk the pier at 6 am before signing. The data told them where to look and what to measure; the visit tells them whether the queue is real.
Mistakes airport teams make with this data
- Reading staff as shoppers. Back-of-house areas, cargo zones and offices next to the terminal carry heavy footfall from workers. Keep points inside passenger zones.
- Using one big circle for the whole airport. A 1 km circle mixes the runway, the car parks and the hotels. Many small points tell you much more than one large one.
- Treating a footfall rise as more passengers. Longer waits from delays also raise people-hours. Check the trend against what you know of the schedule.
- Comparing airports in different months. Seasons and holidays move travel a lot. Compare the same window of days.
- Forgetting the landside neighbours. Hotels, rental desks and offices just outside the fence feed the arrivals hall. Nearby places lists them too.
Doing it with an AI employee
A monthly passenger area report is a natural job for an AI employee, because the zones stay the same and only the figures move.
- Schedule: every month, on the second Monday, so the last days of the month before have arrived.
- My data: your table of zones, each with a name and a position, for example Pier B, Arrivals hall, Rail link.
- Mobility Footfall: each incoming place, 150 m, the last 30 days, all days, with the busiest hour, the day split and the trend.
- Nearby places: each incoming place, within 300 m, restaurants, cafes and shops, counted.
- xMap LLM: the whole list, asked to write one short paragraph per zone on where the offer and the crowd do not match.
- Make a report: a PDF for the commercial committee, and Show on a map for the zones.
What lands in the inbox each month is one report: each zone with its footfall, busiest hour, trend on the month before, the count of places nearby, and a sentence on where a unit could earn more. The Brands for airport retail concessions template starts the other side of the job: a list of well-rated brands to invite to a tender. For the roads that feed the terminal, see Road speeds around the airport, every hour.
Questions
Can footfall tell the airside from the landside of a terminal?
No. It reads hexagons of about 0.1 km2 with no floors or walls, so place each point at the middle of a zone and use your knowledge of the building to interpret it.
Is footfall the same as passenger numbers?
No. It is people-hours of presence, so long waits count more than quick walks, and staff count too. It shows how busy a zone is, not how many passengers flew.
How fresh are the figures?
Each day of footfall arrives about ten days later, so a monthly report run in the second week covers the whole month before.
Does it work at every airport?
Footfall covers most of the world from 17 October 2026, not yet Australia. A place with no data says so and costs nothing.