FlowsBook a callSign inCreate free accountSign up
Roads and traffic

How to keep a delivery route on time when heavy rain is forecast

To keep delivery routes on time in the rain, plan the evening before: fewer stops per route, urgent windows first, live road checks at dawn and an early word to customers.

Part of the guide Location intelligence automation

By the xMap team · · 6 min read

To keep delivery routes on time in the rain, change the plan the evening before rather than the morning of. When the forecast shows heavy rain during delivery hours, give each driver fewer stops, put customers with tight time windows at the start of the route, keep one spare driver or van free, and warn customers whose slots are most at risk. At dawn, check how the roads are actually moving and for flooded or closed roads, and adjust the routes once more before the vans leave.

This article is for dispatchers and delivery managers at grocery, pharmacy, parcel, furniture and meal kit operations who plan routes a day ahead. It is a practical routine for a rainy day: what to look at, when, and what to change. It includes a made-up day in Kuala Lumpur, the common errors, and an AI employee that sends the warning and the revised plan.

The evening before: decide how much to change

Rain affects a round in three places: slower roads, slower stops (drivers park further away, carry goods under cover, wait at doors), and more accidents and flooded streets that force detours. You cannot change the weather, but the evening before you can still change the plan cheaply. Once the vans leave, every change is expensive.

Look at the hour-by-hour forecast for the hours your vans are on the road, not the daily total. Twenty millimetres falling overnight is a different problem from twenty millimetres falling between four and six in the afternoon. Decide on one of three levels:

  • Normal: light or no rain in delivery hours. Run the plan as built.
  • Lighter: moderate rain in part of the day. Take a few stops off each route in that part and give them to a spare driver.
  • Heavy: heavy rain for much of the shift. Fewer stops for every route, the tightest windows first, and some customers offered another slot.

Rebuilding the routes

A route planner orders stops for usual traffic and does not add the minutes at each door. On a heavy rain day both are optimistic, so build the slack in yourself. The simplest way is to plan as if each route had fewer hours: tell the planner to cap the stops per route lower than usual, or share the day's stops between one more driver.

  1. Pull out stops with fixed windows (pharmacy, medical, business deliveries with opening hours) and keep them at the start of each route.
  2. Lower the most stops per route, or add one route, so the day's stops spread thinner.
  3. Re-run the planner from each depot and check the new end times against the drivers' shifts.
  4. Mark the stops most likely to run late: those at the end of long routes and those in areas that flood.
  5. Send those customers a message the evening before, offering a different slot or a safe place to leave the order.

At dawn: check the roads as they are

The forecast tells you what to expect; the roads at six in the morning tell you what you got. Live road speeds around each depot and each zone show whether traffic is crawling, and the jam factor shows how far it is from normal. A separate check for closures and incidents finds the flooded underpass or the blocked junction that a route will cross.

If speeds are close to normal, run the evening's plan. If roads around one depot are far slower than usual, move a few of its stops to a neighbouring depot or to the spare driver, and tell the affected customers before the van leaves rather than after the slot is missed.

A made-up rainy day in Kuala Lumpur

This example is invented. A grocery delivery company in Kuala Lumpur runs twelve vans from two depots, with about 25 stops each on a normal day. At six in the evening its forecast check shows heavy rain from two to six the next afternoon, the second half of the shift.

The dispatcher calls it a lighter day for the morning and a heavy day for the afternoon. Morning routes stay as they are. Afternoon stops are shared across thirteen routes instead of twelve, using the spare van, and the planner caps each afternoon route at 18 stops. Thirty customers at the end of the longest afternoon routes are offered a morning slot; about half accept.

At six the next morning, roads around the northern depot are moving at under half their usual speed after overnight showers and a junction near a river is closed. Four stops that would cross it move to the southern depot's spare capacity. By the end of the day, two deliveries are late, against eleven on the last rainy day the team did not plan for. The numbers are made up, but notice where the gain came from in this example: mostly the evening decision, with the morning check catching what the forecast could not.

Mistakes that make a rainy day worse

  • Waiting until the morning to react. By then drivers, vans and customers are committed.
  • Reading the daily rain total instead of the hours it falls in.
  • Keeping the same stops per route and hoping drivers will hurry. Rushing in rain causes the accidents that wreck the rest of the day.
  • Telling customers after the slot is missed. A message the evening before keeps most of them happy; one an hour late does not.
  • Forgetting the depots themselves. A flooded yard entrance can delay every van at once.

An AI employee for rainy days

In xMap Flows, the evening warning and the morning check can be one AI employee that runs twice a day. It is a typical piece of work for an AI employee for field operations.

  1. Schedule: at 6 in the evening and 6 in the morning, in the depots' time zone.
  2. My data: your depots, and tomorrow's stops from your order system or Google Sheets.
  3. Weather forecast: rain expected and how much at each depot over the next day.
  4. Branch: heavy rain or not, by your own rule.
  5. Traffic Flow and Traffic incidents: in the morning run, speeds, the jam factor and closures around each depot.
  6. Route planner: the routes rebuilt with fewer stops each when rain is heavy.
  7. Approval, then Email: the dispatcher approves the revised plan before it reaches the drivers.

What lands in the inbox on a dry evening: nothing, or a one-line all clear. On a wet one: the rain hours at each depot, a revised route per driver with its new end time, and the list of customers to warn. In the morning: any depot where roads are far slower than usual, and any closures on the way. The templates Rain warning for my delivery hubs, Rain coming: riders and gear for the surge, Incidents near my drivers' zones and New outlets, graded and routed to each rep cover the pieces.

Questions

How many stops should I remove on a rainy day?

There is no general figure. Compare your own past wet and dry days, then set a rule such as a lower cap on stops per route when heavy rain falls in delivery hours, and adjust it as you learn.

Does the route planner account for rain?

No. It plans for usual traffic and does not add time at each door, so on rainy days build slack in yourself with fewer stops per route or an extra driver.

When should customers be warned?

The evening before, as soon as the plan changes. Offer another slot or a safe place to leave the order to those at the end of long routes.

Can live traffic data tell me how many cars are on the road?

No. It gives live speeds, free-flow speeds and the jam factor, which is what you need to see how much a road has slowed.

Templates that do this

Read next

More on roads and traffic · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.