FlowsBook a callSign inCreate free accountSign up
Site selection and expansion

Where to build a hotel: demand, supply and the guests you want

Deciding where to build a hotel means matching a site to who will stay and why: offices, hospitals, campuses, attractions, then the rooms already competing for them.

Part of the guide AI employee for site selection

By the xMap team · · 5 min read

To decide where to build a hotel, start from the guests you want and the reasons they travel, then look for sites close to those reasons and short of good rooms. Business guests come for offices, conference centres and factories; families and tourists for attractions, beaches and events; some come because a relative is in hospital or a child is at university. Count those demand generators around each candidate site, then count the hotels already serving them, how they are rated, how many are chains and how many opened recently. A site with strong reasons to stay and a thin or tired supply of rooms is the one worth a feasibility study.

This is for hotel developers, owners planning a second property, serviced apartment operators and the consultants who advise them. It covers the demand side and the supply side, what three cities' hotel counts show about reading supply, a made-up screen of sites in Toronto, the mistakes that sink hotel projects, and an AI employee that keeps the picture current while a project moves through planning.

The demand side: why people would stay here

  • Business demand. Office districts, business parks, conference and exhibition centres, large factories and logistics hubs. Weekday occupancy, short stays.
  • Leisure demand. Attractions, museums, beaches, stadiums and arenas, wine regions, ski areas. Weekend and seasonal occupancy, longer stays.
  • Transport. Airports and main rail stations bring early flights, missed connections and crews.
  • Institutions. Hospitals bring patients' families, universities bring parents, visiting staff and graduations.
  • Events. A stadium or arena fills rooms on a few dozen nights a year, which helps rates more than occupancy.

Count these within a distance a guest would accept: a walk of 10 to 15 minutes for a city hotel, a short drive for a suburban or airport hotel. A list with names and positions is more useful than a total, because one convention centre can matter more than a hundred small offices.

The supply side: who already serves them

Then count the hotels in the same area. Four things matter more than the total.

  1. Quality. The average rating and how many are rated 4.5 or more. A district of tired, weakly rated hotels can be an opening for a new one.
  2. Brands. How many belong to a chain. A market with few branded hotels may suit a brand; one full of brands may suit a distinctive independent.
  3. Recent openings. How many opened in the last year. Many recent openings mean new competition is already arriving.
  4. Segment. Budget, midscale, upscale, serviced apartments. Count the ones that would compete for your guest, not every bed.

What three cities' counts show

xMap's places database (November 2026) gives a feel for how different hotel markets look within 10 km of a city centre.

CityHotels listedAverage ratingOpened in the last year
London2,4084.1 (of the 447 nearest the centre)2 of the 446 nearest with an opening date
Sydney5434.1 (of the 414 nearest the centre)8 of the 413 nearest with an opening date
Toronto3123.894 of the 310 with an opening date

Hotels within 10 km of each city's centre, xMap's places database, November 2026. In London and Sydney the rating and openings are worked out from the hotels nearest the centre only.

Toronto stands out: of the hotels with an opening date, 94 opened in the twelve months before November 2026, while very few did among those nearest the centres of London and Sydney. A developer looking at Toronto should read that as a lot of new supply already arriving, and check which segments and districts those openings sit in before adding another. London's count is large, but the rating and openings describe only the hotels nearest the centre, so a site further out needs its own count.

A made-up screen in Toronto

This example is made up. A developer of 150-room midscale hotels has four candidate sites in Toronto. Around each, it counts offices and business parks, hospitals, universities and attractions within a 15-minute walk, then midscale hotels in the same area, their ratings and their opening dates.

The site near a hospital cluster has strong weekday demand and only three midscale hotels, all rated under 4, none recent: it goes to a feasibility study. The waterfront site has many attractions but six hotels opened there in the past year. The business park site has offices but nothing nearby for weekends. The fourth, near a stadium, is busy on event nights and quiet the rest of the year. Two sites go on hold, one is dropped.

Mistakes that sink hotel projects

  • Counting all hotels as rivals. A hostel and a five-star hotel do not compete. Filter by segment.
  • Ignoring the pipeline. Hotels that opened recently, or are being built, change the market before yours opens.
  • Relying on one demand source. A hotel tied to a single employer or venue suffers when it moves or quiets down.
  • Forgetting weekends. A business district can be empty from Friday night. Look for leisure or institutional demand too.
  • Skipping the feasibility study. Location data screens sites. Rates, occupancy and building costs need a proper study.

Keeping the picture current with an AI employee

A hotel project takes years, and the market moves meanwhile. An AI employee in xMap Flows can screen candidate sites and then watch each one. It is one of the jobs in the site selection guide.

  1. My data: the candidate sites, or your hotel once open.
  2. Travel area: a 15-minute walk, or a short drive for a suburban site.
  3. Nearby places: demand generators (offices, hospitals, universities, attractions, stadiums) in counting mode, and hotels in a second block with ratings, chains and opening dates.
  4. xMap LLM: a short read of each site's demand and supply for your segment.
  5. Make a report for the investment committee; later, Only new and Email each month with hotels that opened nearby.

The templates new hotels opening near mine, monthly area report for hotel owners and where to open serviced apartments cover the watching, the owner's report and the screen for a lighter format.

Questions

What is the most important factor in a hotel location?

A strong, lasting reason for your target guests to stay nearby, with few good hotels already serving them. Access and visibility matter, but demand comes first.

Should a new hotel be near other hotels?

Sometimes. Hotel districts near convention centres or airports work because guests look there. But count the recent openings: a cluster still growing may leave little room.

Can location data predict a hotel's occupancy?

No. It shows the demand generators and the competing supply around a site. Occupancy and rates need a feasibility study with market data on stays and prices.

How far around a site should I count?

A 10 to 15-minute walk for a city hotel; a short drive for suburban, airport or roadside hotels.

Templates that do this

Read next

More on site selection and expansion · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.