FlowsBook a callSign inCreate free accountSign up
Site selection and expansion

Choosing a trampoline park location: families, big units and easy roads

A trampoline park needs a tall, cheap unit and thousands of families within a short drive. How to weigh children nearby, rival play venues, schools and the road in.

Part of the guide AI employee for site selection

By the xMap team · · 5 min read

The right trampoline park location is a tall, large unit on an edge-of-town road that parents can reach in fifteen minutes or less, with many households with children inside that drive and few rival play venues competing for the same weekend. Rent and ceiling height usually push these parks into light-industrial areas; the job is to find the one industrial unit that is still easy for families to get to, with parking for a birthday party on a Saturday.

This guide is for operators planning a new park, franchisees choosing their territory, and landlords of big-box units wondering whether a leisure tenant fits. It covers what the building must offer before anything else, the readings to take for families and rivals, a made-up comparison in Pune, the most common mistakes, and a flow that reads each unit for you.

The building comes first

No amount of demand helps if the unit cannot hold the equipment. Check these with the landlord and a fit-out contractor before any location work:

  • Clear internal height for trampolines and safety space above them.
  • A floor area large enough for the courts, a party room, a cafe and toilets.
  • Planning permission or zoning that allows leisure use in an industrial or retail building.
  • Fire exits, insurance requirements and capacity limits for children.
  • Parking for a busy Saturday: dozens of cars arriving for birthday parties at the same time.

Reading demand around a candidate unit

A trampoline park lives on repeat family visits, parties and school trips. Take these readings inside a drive area rather than a circle, because a ring road or river can put a nearby neighbourhood half an hour away.

  1. Draw the area parents can reach by car in 10 and 15 minutes from the unit.
  2. Inside it, count children: residents aged 0 to 9 and 10 to 19, where xMap has population figures (among them India, France, Canada, Thailand, Egypt and Australia; not the United Kingdom or the United States).
  3. Count rival family venues: indoor playgrounds, bowling alleys and other trampoline parks. There is no single place type for trampoline parks, so search online maps by name as well.
  4. Count schools within the drive area for weekday group bookings.
  5. Check the road: live speed and jam factor near the entrance on a Saturday morning, when most families arrive.

Three units in Pune, made up

This example is made up. An operator with two parks elsewhere in India has three units in Pune that pass the building checks, and reads each the same way.

Unit A, industrial estateUnit B, by a ring roadUnit C, retail park
Children aged 0 to 19 within a 15-minute driveModerateHighHigh
Rival play venues in the drive area125
Schools in the drive areaFewManyMany
Saturday morning roadFree flowing, hard to findLight, signposted exitHeavy, queues into the car park
ParkingAmpleAmpleShared and full at weekends

Made-up readings for three candidate units.

Unit C has plenty of families but five venues already chase them and the car park is full when parties arrive. Unit A is cheap and uncontested, but fewer families can reach it quickly. Unit B sits off a ring road with many children and schools inside the drive, two rivals, and an easy turn in on a Saturday. It wins, and the operator can still use Unit C's crowd for leaflets and school partnerships.

Mistakes that cost trampoline parks

  • Drawing a circle instead of a drive area. Families judge distance in minutes. A neighbourhood 4 km away across a river may be a 25-minute drive.
  • Ignoring the second visit. The opening month is busy anywhere. Repeat visits depend on being an easy weekend habit, which needs a short drive.
  • Counting only trampoline parks as rivals. Soft play, bowling, climbing walls and cinemas compete for the same family afternoon.
  • Forgetting weekdays. Schools, holiday camps and toddler sessions fill the quiet hours. A site with few schools nearby may struggle from Monday to Thursday.
  • Assuming footfall shows families. Footfall measures people-hours of presence around the unit, and on an industrial estate it is mostly workers. Use resident children and rival counts for demand.

An AI employee that scores each unit

When agents send big units, a flow can read every one the same way, using the approach in the site selection guide.

  1. New rows: each unit that passed your building checks, with its position.
  2. Travel area: a 15-minute drive around it, the longest Travel area draws for now.
  3. Demographics: residents by age group inside the drive area, where the country has figures.
  4. Nearby places: indoor playgrounds, bowling alleys and schools inside the area, and Map business scan to find trampoline parks by name.
  5. Traffic Flow: the road at the entrance, scheduled on a Saturday morning.
  6. xMap LLM: a score with a reason naming children reachable, rivals and the road.
  7. Email: the score and a map of rivals and schools.

Each unit lands in the inbox with its score, the number of children inside the drive, the rival venues, the schools nearby and how the road looked when the flow ran. The template where families need after-school activities shows a similar family-demand search, best neighbourhoods for families ranks areas by children, and schools near my exhibition, for school trips turns the school count into a sales list once you open.

Questions

How far will families drive to a trampoline park?

Most regular visits come from within about fifteen minutes. Parties and holiday trips may come further, but the repeat trade that pays the rent is local.

Is an industrial estate a good place for a trampoline park?

Often, for the height and rent. Choose a unit near the estate's entrance, with signs from a main road and parking that is free at weekends.

Can I measure how many cars pass a unit?

Only for roads in the United Arab Emirates, where Regional data has hourly car counts since 2021. Elsewhere you can read live speed and how jammed the road is, not car numbers.

What if the country has no population figures?

Use rival venues, schools and the road, and add local census or school roll figures from public sources yourself. Say which readings the decision rests on.

Templates that do this

Read next

More on site selection and expansion · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.