FlowsBook a callSign inCreate free accountSign up
Workflows by industry

How plumbers and electricians set a service radius they can keep

A service radius for plumbers and electricians should follow travel minutes from the van, not a circle on a map. How to set callout bands and check the work inside them.

Part of the guide Workflow automation

By the xMap team · · 5 min read

A good service radius for plumbers and electricians is measured in minutes of driving from where the van starts, not in kilometres drawn as a circle. Set an inner band you can reach fast for emergencies, an outer band for planned work, and decline or charge extra beyond it. Then check that enough homes and businesses sit inside the inner band to keep the van busy, and redraw it when traffic or your base changes.

This article is for owner-operators and small firms in plumbing, electrical work, heating, gas and locksmithing, where a leak or a fault means someone wants you there within the hour. It covers why emergency and planned work need different areas, how to draw them, a made-up example in Cape Town, the usual mistakes, and an AI employee that helps run the area day to day.

Emergency work and planned work need different areas

A burst pipe or a tripped main board is a race. The customer rings two or three firms and books the one who can arrive first. Your chance of winning the job falls with every minute between your van and the address. Planned work, such as a bathroom refit or rewiring a kitchen, is the opposite: the customer compares quotes and dates, and twenty extra minutes of driving matters less than the price and the reviews.

So most trades firms do best with bands rather than one line:

  • Emergency band: the area you can reach in about 10 to 15 minutes from the van's base at a normal time of day. You promise fast arrival here.
  • Standard band: a wider area for booked jobs, where you arrive on the agreed day.
  • Beyond: you take only large planned jobs, or you add a travel charge and say so before booking.

Where the van starts matters as much as the minutes. A van that leaves a yard on an industrial estate each morning has a different emergency band from one that leaves the owner's driveway. If your evening callouts start from home, draw that band too.

How to draw the bands

The Travel area block draws the area a van can reach along the roads within a travel time, up to 15 minutes by car for now, or a distance by road. It follows bridges, rivers, one-way systems and motorway junctions, which is why it looks nothing like a circle. Draw one area for the yard and one for home, at 10 and 15 minutes each, and compare them on a map.

Inside each band, look at two things. First, the work: how many homes, shops, restaurants and offices sit there. Second, the competition: how many other plumbers or electricians are inside the same minutes and how they are rated. A band with plenty of buildings and only a few poorly rated firms is worth advertising in; one with a dozen firms rated 4.8 needs a sharper reason for customers to call you.

A made-up example: a plumber in Cape Town

This example is invented. A two-van plumbing firm in Cape Town keeps its vans at a small yard and takes evening callouts from the owner's home on the other side of a hill. Its old rule was "anywhere within 20 km", which sent a van across the city at rush hour for a dripping tap.

Drawn by travel time, the yard's 15-minute area turns out long and narrow along the main road, while home's area is compact but cut off by the hill. Restaurants and cafes are dense in the yard's area, which suggests a planned-maintenance offer for kitchens; home's area is mostly houses, so evening emergencies are the main business there. Eleven other plumbers sit inside the yard's area, most rated above 4.5; only four inside home's area.

The firm changes its website: fast emergency service in two named areas, booked work across a wider standard band, and a clear travel charge beyond it. It also sets up a cold-night alert, because burst pipes cluster after the first freeze of winter in the hills.

Mistakes that cost callouts

  • Promising one arrival time for the whole area. A customer at the edge will wait twice as long as one near the yard.
  • Drawing the area from the office address when the vans live somewhere else.
  • Counting kilometres across water or hills that the van must drive around.
  • Taking every emergency in the standard band. A forty-minute drive to a leak is often a lost customer anyway, because a closer firm arrives first.
  • Forgetting that a second van changes everything. Two bases, two emergency bands, and a much bigger area you can honestly promise.

An AI employee for your service area

Once the bands are set, an AI employee in xMap Flows can keep an eye on them each week. Field trades are one of the jobs covered in the guide to an AI employee for field operations.

  1. My data: a small table with each van base, the yard and home.
  2. Travel area: 15 minutes by car from each base.
  3. Nearby places: other plumbers or electricians inside each area, with their ratings.
  4. Only new: so a newly listed rival reaches you once.
  5. Weather forecast: frost, storms or heavy rain in your areas over the next days.
  6. xMap LLM: a short weekly note on what changed and what to do.
  7. Email: the note to the owner on Monday morning.

What lands in the inbox: new rivals in your areas, how their ratings compare with yours, and a warning when the week ahead brings the kind of weather that fills a plumber's phone. You can also use the bands for marketing, sending local offers only to businesses inside the minutes you can keep.

Starting points: How customers rate plumbers in my city, Freezing night ahead: protect your pipes, Trade counters near each van base and Next week's jobs planned around the weather.

Questions

What is a sensible service radius for plumbers?

For emergencies, the area you can reach in about 10 to 15 minutes from where the van starts. For booked work, a wider area you can reach on the agreed day without losing most of it to driving.

Why not just use a circle of 10 or 20 km?

A circle ignores roads, bridges, hills and traffic. Two addresses the same distance away can be 8 minutes or 30 minutes apart by van.

Should electricians use the same bands as plumbers?

The method is the same. Electricians often do more planned work and fewer emergencies, so their standard band can be wider and their emergency band smaller.

How often should I redraw the area?

When a base moves, a second van starts, or roads change, such as long roadworks or a new bypass. Otherwise once a year is enough.

Templates that do this

Read next

More on workflows by industry · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.