FlowsBook a callSign inCreate free accountSign up
Workflows by industry

How climate teams keep a daily note on the weather and air around each site

One short note per site each morning: heat, rain, wind and UV from the forecast, air warnings from official pages and news, and a picture from space when needed.

Part of the guide Workflow automation

By the xMap team · · 6 min read

Climate and environment teams keep track of conditions around their sites with one short note per site, written each morning from the same few sources: the forecast for the days ahead (heat, rain, wind and UV), the official air quality and weather warning pages for each region, the news for anything local, and a recent satellite picture when a site needs a look. The value is not in any single figure but in seeing every site on one page, every day, in the same format, so a change stands out.

This article is for sustainability, environment, health and safety and facilities teams who look after plants, depots, farms, construction sites or nature sites in several places. It explains what goes into a useful daily note, what each source can and cannot tell you, a made-up example across three sites, and how to have an AI employee write the note for you.

What a useful daily site note contains

A note that people read is short. For each site, aim for five lines at most, in the same order every day, and a clear flag when something needs action.

  • Heat: the highest temperature expected today and over the next few days, against the threshold that changes your work (outdoor shifts, cooling, water use).
  • Rain: how much is expected and on which day, against the amount that causes run-off, flooding of a yard or a stop to earthworks.
  • Wind: the strongest gusts, which matter for cranes, dust, spraying and tall structures.
  • UV: the day's highest index, for crews working outside.
  • Warnings and news: any official air quality or weather warning for the region, and any local story about a fire, a spill or a closure nearby.

Write your thresholds down first. A note that says "34 degrees on Thursday" is less useful than one that says "Thursday above our 32-degree heat limit: move outdoor work to the morning".

Where each part comes from, and its limits

The forecast

The Weather forecast block gives up to 16 days of forecast from national weather services. For each site it adds the highest and lowest temperature, whether rain is expected, how much and on which day, the strongest wind and the UV index, plus a one-line summary. Temperatures are in degrees Celsius, rain in millimetres and wind in km/h. A rain day is one with 0.5 mm or more. Forecasts grow less certain further out, so treat days one to three as planning figures and the rest as a heads-up.

Air quality

Air quality readings are not among the data blocks offered in xMap Flows today, so do not expect a pollution index on each site from the forecast. What a team can do is watch the official sources directly. Web page watch reads up to ten public pages each run, such as a regional environment agency's air quality bulletin, and passes on only the pages whose words changed, with xMap AI saying what changed in a sentence. The News block reads news feeds and keeps the stories about the subjects you name, such as smog, dust or wildfire smoke, and places each story on the map when it names a city.

A look from space

Satellite images finds recent pictures of each site at about 10 metres a pixel, with a new pass every few days. That is enough to see a yard flooded, a burn scar, a dry reservoir or a coastline after a storm, not people or vehicles. Cloud can hide a pass, so ask for the clearest picture in the last 14 or 30 days rather than 7.

A worked example across three sites

The sites and figures below are made up. An environment team looks after a food plant near Chennai, a distribution yard outside Perth and a wetland restoration site near Rotterdam. Their thresholds: heat above 35 degrees moves outdoor shifts, rain above 20 mm in a day means checking drains, gusts above 50 km/h stop crane work and spraying.

SiteHeatRainWindFlag
Chennai plant37 on Wednesday4 mm FridayGusts 28Heat: shifts to the morning on Wednesday
Perth yard29 todayNoneGusts 55 ThursdayWind: hold the crane lift on Thursday
Rotterdam wetland12 today26 mm SaturdayGusts 40Rain: check the outflow sluice Friday

A made-up daily note for three sites against the team's own thresholds.

The same morning the agency bulletin page for the Chennai region changed, and xMap AI summed up the change as a poor air day expected tomorrow. That line goes under the plant's row, with a link to the page, so the site manager reads the source rather than the summary alone. Nothing else changed on the watched pages, so nothing else appears.

Mistakes to avoid

  • Sending every figure for every day. Long tables go unread; send the flags and keep the full forecast one click away.
  • Using one threshold for every site. A wetland and a concrete pour react to the same rain very differently.
  • Treating a forecast 12 days out as settled. Use it to warn, not to cancel.
  • Mixing your own measurements with public forecasts without saying which is which.
  • Reading the note only when the weather is bad. A quiet note every day is what makes the loud one stand out.

Doing it with an AI employee

An AI employee in xMap Flows can write the note every morning and send it before the first shift.

  1. Upload your sites to My data with a name, a position and, if you like, each site's thresholds as columns.
  2. Start the flow with Schedule every day at 06:00 in your time zone.
  3. Add Weather forecast set to each incoming place, for the next 5 days.
  4. In a second branch, add Web page watch on the official bulletin pages for your regions, with Say what changed on.
  5. Add xMap LLM working on the whole list, told your thresholds and asked to write five lines per site with a flag where a threshold is crossed.
  6. Send it with Email, or to your team's chat app, and keep Make a report for a weekly PDF.

What arrives each morning is one message: a short paragraph per site with today's flag on top, the week's heat, rain and wind against your limits, and a line for any official page that changed, with its link. On days when nothing crosses a threshold, the note says so in one line per site. Add Satellite images as a weekly flow for the sites where the ground itself changes, and the picture arrives in the same inbox.

Questions

Can xMap Flows give an air quality index for each site?

Not from a data block today. Teams watch the official air quality bulletin pages with Web page watch and the news with the News block, and the daily note quotes what changed with a link to the source.

How far ahead does the weather forecast go?

Up to 16 days, from national weather services. The first few days are the most reliable; use the rest as an early warning.

What counts as a rain day in the forecast?

A day with 0.5 mm of rain or more. Set your own threshold for the amount that actually affects a site.

Can a satellite picture show smoke or flooding at a site?

It can show a flooded yard, burn scars or water levels at about 10 metres a pixel when the sky is clear. Clouds hide some passes, so a 14 or 30-day window finds a clear one more often.

Who should receive the daily note?

The people who act on it: site managers and shift leads first. Keep the list short, and send a weekly summary to everyone else.

Templates that do this

Read next

More on workflows by industry · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.