FlowsBook a callSign inCreate free accountSign up
Roads and traffic

How roadworks shrink or reshape a shop's catchment

A closed junction can cut a shop off from the streets its customers come from. How to see which part of a catchment roadworks affect, and what to do while they last.

Part of the guide Location intelligence automation

By the xMap team · · 5 min read

Roadworks change a shop's catchment by making some of the streets it serves slower or harder to reach, while leaving others untouched. The catchment does not shrink evenly like a circle getting smaller; it loses a slice on the side where the works are, and sometimes gains a little on the other side as drivers take a new route. To see the effect, put the roadworks on the same map as the shop's usual catchment, note which side and which approach roads they sit on, and check how traffic is moving on those roads at the hours customers come.

This article is for shop owners, area managers in retail and food chains, and landlords who want to understand a dip in trade during street works. It covers what the data shows, how to read the overlap, a made-up example, the usual mistakes and an AI employee that warns you when works start nearby.

The usual catchment, and why it is lopsided already

A catchment is the area most customers come from. For a shop people drive to, a good first picture is a drive-time area: everything reachable by car in, say, 10 minutes, drawn along roads. The Travel area block draws it from the usual road network. It is already lopsided before any roadworks: a ring road on one side, a river or rail line on the other and a one-way system nearby all bend it.

What the data shows during works

  • Where the works are. The Traffic incidents block lists road closures, roadworks and other incidents happening now, with the street, the district and the position. Run it around the shop or across the catchment.
  • How slow the roads are. Traffic Flow gives the current speed on the roads around a place, the speed when roads are free, and a jam factor from 0 to 10. Run it at the shop and at a point on each main approach.
  • Who lives on the cut-off side. Where population figures exist, Demographics can count residents in the part of the catchment behind the works. Coverage includes countries such as France, Canada, India and Australia, but not the United Kingdom or the United States.

None of these count cars or customers. They tell you where the obstacle is, how much it slows traffic when the flow runs, and how many people live beyond it.

Reading the overlap

  1. Draw the usual 10-minute drive area around the shop.
  2. Mark every roadworks or closure inside it, and note which approach road each one sits on.
  3. Run Traffic Flow at the shop and on each approach at the hours your customers usually come, on two or three days.
  4. Compare each approach's current speed with its free-flow speed. An approach running at a small fraction of free flow during your busy hours is the one cutting trade.
  5. Look at the part of the catchment behind that approach. That slice is where lost customers most likely live.

A worked example

This example is made up. Say a garden centre on the edge of Lyon draws most customers from the west, across a bridge. Works close two lanes of the bridge approach for six weeks.

The weekly check lists the roadworks on the approach road. Traffic Flow at 10:00 on Saturday shows the approach well below its free-flow speed with a high jam factor, while the eastern road runs freely. Demographics, which covers France, counts the residents in the western slice of the catchment. The owner decides on three things for the six weeks: a sign at the eastern entrance, a message to loyalty-card customers in the west about a quieter route, and a short delivery offer for heavy items to customers on that side.

The owner did not need to know how many cars crossed the bridge. Knowing where the works were, how slow the approach was at the busy hour and how many people lived behind it was enough to act.

Mistakes to avoid

  • Treating the catchment as a circle. Roadworks on one approach hurt one side; a circle hides that.
  • Reading one slow measurement as the whole story. Traffic Flow is a snapshot when the flow runs. Repeat it at the same hour on several days.
  • Assuming fewer cars from speed data. Slow traffic can mean more cars, not fewer. Traffic Flow never gives car counts.
  • Waiting for the trade figures. By the time a monthly report shows the dip, half the works are over. Watch for works starting.
  • Forgetting deliveries and staff. The same works can make suppliers and staff late, which matters at opening time.

An AI employee that warns you when works start

In xMap Flows, a daily AI employee can watch for works in and around your catchment:

  1. Schedule: every day at 07:00.
  2. My data: your shop or shops.
  3. Traffic incidents: around each shop, with the incidents nearby and the closest one.
  4. Filter: keep shops with at least one incident nearby.
  5. Traffic Flow: speeds and jam factor on the roads around each of those shops.
  6. xMap LLM: for each shop, write two lines on where the works are and which approach they affect.
  7. Email: to the shop manager, only on days when something is found.

On most days nothing arrives. On the day works start near a shop, the manager gets the street, the kind of incident and how slow the nearby roads were at seven. Templates that start close to this include Roadworks and closures near my projects, New roadworks and the residents affected and Road closures in my city.

Questions

Does the Travel area block take roadworks into account?

No. It draws the area from the usual road network. Put the roadworks from the Traffic incidents block on top of it to see which part of the catchment they affect.

Can I see how many cars roadworks keep away?

Not with Traffic Flow, which gives speeds and a jam factor, never car counts. Hourly car counts exist only for roads in the United Arab Emirates, through the Road traffic history dataset.

How do I know which customers the works affect?

Find which approach road the works sit on, then look at the slice of the catchment behind it. Where population data exists, Demographics counts the residents there.

How often should I check for roadworks?

Daily for a shop on a busy route. Works start without much notice, and a morning check means the manager hears about them on day one.

Templates that do this

Read next

More on roads and traffic · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.