Cinema catchment population: residents within a drive of the screen, by age
Measure cinema catchment population as the people living within a short drive of the screen, split into age groups, and read it against the screens already nearby.
Part of the guide Location intelligence automation
Cinema catchment population is the number of people who live within the drive most of your audience will make to see a film, usually counted inside a drive-time area around the building rather than a plain circle. Count the residents inside that area, split them by age, and you have the base an operator, a landlord or a film distributor can plan from: how many people could reach the screen, and how young or old they are.
This is for cinema operators planning a new site or a refit, developers adding a screen to a mixed-use scheme, distributors deciding where to book prints, and councils weighing a leisure plan. It explains why a drive area beats a circle for cinemas, which age groups to watch, a worked comparison of two made-up sites, and a flow that measures each screen the same way.
Why a drive area, not a circle
People go to the cinema by car, bus or train far more than on foot, and they compare journeys, not distances. A screen beside a motorway junction can be easier to reach from 8 km away than another screen 3 km away across a river. A plain circle treats both the same.
The Travel area block draws the area actually reachable along the roads within a travel time, by car, bike or on foot, around each place you give it. It hands that area to the blocks after it, the way an Area of interest would. For now it reaches up to 15 minutes by car, which covers the core of a cinema's audience in most cities; a longer drive is a separate step beyond that core.
Counting the people inside it
After the drive area, the Demographics block adds up the residents of every small hexagon inside it from xMap's population grid. For each area it returns the total, men and women, nine age groups from age_0_9 to age_80_plus, the wider groups of children, working-age adults and seniors with their shares, the size of the area and people per square kilometre.
Which age groups to read
A cinema's audience is not spread evenly by age, and different programmes lean on different groups. The nine bands let you look at each one:
- age_10_19 and age_20_29: teenagers and young adults, often the heart of opening weekends for big releases.
- age_30_39 and age_40_49: parents, who bring children to family films, alongside age_0_9.
- age_60_69 and above: a weekday daytime audience for many operators, and the core of some arthouse and senior screening programmes.
The data gives residents in each band. It does not say how often any of them go to the cinema, what they watch, or what they earn, so use the bands to judge the shape of the audience and your own ticket data to judge how it behaves.
A worked comparison of two sites
These sites and figures are invented. A regional chain in Thailand is choosing between two plots for a six-screen cinema: one on the edge of Bangkok next to a ring road, one in the centre of Chiang Mai. It counts residents within a 15-minute drive of each.
| Made-up site | Residents within 15 min by car | Aged 10 to 29 | Aged 0 to 9 | Aged 60 and over |
|---|---|---|---|---|
| Bangkok ring road | 410,000 | 96,000 | 41,000 | 62,000 |
| Chiang Mai centre | 230,000 | 61,000 | 20,000 | 39,000 |
Invented figures to explain the reading; not data about Bangkok or Chiang Mai.
The ring-road plot reaches far more people, and twice as many young children, so it suits a family-led programme. The Chiang Mai plot reaches fewer people but has a slightly higher share of residents aged 10 to 29. The chain then counts the cinemas already inside each drive area with Nearby places, looking for the Movie theater type: if the Bangkok area already holds several large complexes and Chiang Mai has one, the smaller catchment may still be the better bet.
Mistakes to avoid
- Counting a circle across a river or a park. Use a drive area so the count follows the roads.
- Comparing different drive times. Ten minutes at one site and fifteen at another are not comparable. Keep one time for a comparison.
- Treating residents as tickets. The count is people who live there. How often they go, and whether they choose you, comes from your own sales.
- Forgetting the screens already there. Always set the catchment against the cinemas inside the same area.
- Assuming coverage everywhere. The population grid covers about 100 countries, such as Thailand, India, Canada and France, but not the United Kingdom or the United States.
An AI employee that measures every screen
For a chain with several sites, or a distributor tracking new screens, the same measurement can run for every location in one go:
- My data: your cinemas and candidate plots, one row each with its position.
- Travel area: 15 minutes by car around each.
- Demographics: the residents of each drive area, by age group.
- Nearby places: each site with a count of the cinemas within a few kilometres, passed on with its residents.
- xMap LLM: a two-line note per site, using only these figures.
- Make a report: one PDF with every site, emailed to the team.
The report lands as a PDF with each site's residents, its age bands, the screens around it and a short note. The template New cinema screens for my film distribution team watches for new screens, and Who lives around new places adds residents to places as they are found. For the full method, see the AI employee for site selection.
Questions
What drive time should a cinema catchment use?
Many operators look at the core within about 15 minutes by car first. Travel area currently reaches up to 15 minutes by car, which covers that core.
Can I see the catchment split by age?
Yes. Demographics returns nine age groups for the area, from 0 to 9 up to 80 and over, plus children, working-age adults and seniors.
Does the data say how often people go to the cinema?
No. It counts residents by age group and by men and women. Attendance and spending have to come from your own ticket and sales data.
How do I count the competing cinemas?
Put Nearby places after the Travel area, looking for the Movie theater type: it finds the cinemas inside each drive area, each marked with the area it is in, so you can count them site by site.
Templates that do this
Read next
More on population and demographics · Every article · Templates