FlowsBook a callSign inCreate free accountSign up
Footfall and mobility

Foot traffic data for business: what it answers

What foot traffic data tells a business: which site is busiest, when the day peaks, whether a street is picking up, where it falls short, how to get it.

Part of the guide Location intelligence automation

By the xMap team · · 5 min read

Foot traffic data tells a business how busy the streets around an address are, by day and by hour, measured the same way at every address. That makes it good at comparisons: which of five branches sits in the busiest spot, what time the area fills up, whether a street is getting busier or quieter. It is weak at anything about your own customers, because it measures everyone around the place, not the people who walked in.

This article is for owners, operations and expansion teams, landlords and agencies who are deciding whether foot traffic figures are worth adding to their decisions. It sets out the questions the data answers well, the ones it does not, how the figures are produced, an example in Sao Paulo (made up), the usual mistakes, and how to get figures for your own addresses on a timetable. For the definitions, see foot traffic data in the glossary.

Questions it answers well

  • Which of my sites is in the busiest spot? Measured the same way at each address, the figures rank them fairly.
  • When does the area fill up? The busiest hour and how the day splits between morning, midday, evening and late night.
  • Which day of the week is strongest? The busiest and quietest day, counted in each place's own time zone and weekend.
  • Is it picking up or slowing down? The last seven days against the seven before.
  • Is a candidate street as busy as my best one? Measure the candidate and your best branch in the same window and compare.

Questions it cannot answer

Being clear about the limits saves you from a wrong decision dressed up as data.

  • How many customers came in. The figures cover everyone around the address: passers-by, office workers, neighbours. Your till and door counter tell you about customers.
  • How many different people. The unit is people-hours of presence. Someone who stays three hours counts three times, so a park and a bus stop with the same figure are busy in different ways.
  • Who those people are. Age, income and the like are not in it. For residents around a place, population data is a separate source.
  • Yesterday. Each day arrives about ten days later, so this week's figures describe the week before last.
  • Every country. Footfall covers most of the world from 17 October 2026, but not Australia yet. Where visitors come from is measured only in Sao Paulo so far.

How the figures are produced

The figures come from a panel of devices, scaled up to the whole population, and added up over small hexagons of the map, each about a tenth of a square kilometre. You choose how far around an address to add up, from 50 to 500 metres. Everything is an aggregate: no person, device or single trip is ever shown, and a group of fewer than five trips is not reported. A place with no data says so rather than showing zero.

An example in Sao Paulo, made up for illustration

Say a chain of fitness studios in Sao Paulo has three studios and a budget for leaflets and street posters around one of them. The marketing lead wants to know which studio sits in the busiest area at the hours classes run, and which districts its visitors travel from, so the posters go where people live rather than where they pass.

StudioFootfall per dayBusiest hourTop district visitors come from
Pinheiros38,50018:00Vila Madalena
Moema22,10007:00Campo Belo
Tatuape29,80019:00Penha

Made-up figures for illustration only. Footfall is people-hours of presence within 200 m, averaged over the days available.

Pinheiros is the busiest area, but its peak is the evening crowd heading to bars, not the early class. Moema is quieter overall, yet its busiest hour matches the 07:00 class, which is the one the chain wants to fill. The lead puts the posters around Moema and the leaflets in Campo Belo, where the trips into that area most often start. None of this says how many people will sign up; it says where the effort meets the most people at the right time.

Mistakes people make with foot traffic figures

  • Comparing figures from different windows. Two weeks in October against two weeks in December is a different question from which site is busier. Use the same days for every site.
  • Comparing different radii. 500 metres gathers more people than 200. Pick one distance for a comparison and keep it.
  • Treating the figure as a visitor count. A cinema and a bus interchange can show the same footfall for very different reasons. Read the busiest hour and the split of the day next to it.
  • Expecting last weekend. Plan with the ten-day delay in mind; for a weekly report, the newest days are the ones before last week.
  • Using it to single anyone out. The figures describe areas, never people, and the Terms forbid using them to follow anyone.

Getting figures for your own addresses

In xMap Flows an AI employee can measure your list of addresses on a timetable and send the figures where your team works. It is one of the jobs described on the location intelligence automation page.

  1. Upload your addresses once as a table and bring them in with My data after a Schedule set to every Monday.
  2. Add Mobility Footfall: the same distance for every address (200 m is a good start), the last 7 or 14 days, and the figures you want (footfall, busy hours, busiest days, trend).
  3. Add Sort and limit on footfall per day, highest first, so the busiest address leads.
  4. Optionally add xMap LLM to write one line per address on what changed against the week before.
  5. Send the list by Email or into a sheet in Google Sheets.

What lands each week is one row per address: footfall per day, the busiest hour, the split of the day, the busiest and quietest day, the trend, and a note when an address has fewer days than asked. To weigh footfall against residents, add Demographics in countries that have population data. To screen many possible sites at once, start from a template such as Where to open next or Score every neighbourhood for a new branch, and add Mobility Footfall to the shortlist.

Questions

Is foot traffic data the same as a visitor count?

No. It is people-hours of presence around an address, so someone who stays three hours counts three times. It is a measure of how busy a spot is, best used to compare places.

How up to date is it?

Each day arrives about ten days later. A window of the last seven days covers the seven days that end about ten days ago.

Which countries are covered?

Footfall covers most of the world from 17 October 2026, but not Australia yet. Where visitors come from is measured in Sao Paulo only so far.

Can I see individual people or devices?

No. Everything is an aggregate over small areas of the map, and groups of fewer than five trips are not shown.

Templates that do this

Read next

More on footfall and mobility · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.