How waste collectors plan bin routes for commercial pickups
Waste collection route planning for restaurants, shops and offices: putting the day's pickups in order from the yard, sharing them between trucks, and what to check by hand.
Part of the guide Workflow automation
Good waste collection route planning for commercial customers comes down to three steps done every collection day: take only the pickups due today, share them between the trucks so each gets a compact part of town, and put each truck's stops in road order from the yard and back. The rest, such as access times, bin sizes and trips to the transfer station, is local knowledge you add on top.
This article is for private collectors and council contractors who empty bins at restaurants, hotels, shops, offices and markets. It explains how commercial rounds differ from household ones, what a route planner decides and what it leaves to you, a made-up Tuesday for a collector in Kuala Lumpur, and how to have the routes waiting for the drivers before the shift.
Why commercial rounds are harder than household ones
A household round follows streets: every bin on the road goes. A commercial round is a scatter of customers on different days and frequencies. A restaurant may need daily collection, a dentist once a week, an office tower three times a week, and each has its own rules about when the truck may come.
- Different days per customer. The list of stops changes every day, so yesterday's order is no use today.
- Access windows. Many restaurants want collection after closing or before opening; some streets ban large vehicles at set hours.
- Bin size and weight. A full truck has to tip before it can carry on.
- Customers come and go. New contracts and cancellations change the map every week.
What a route planner decides, and what it does not
The Route planner block takes the stops that reach it and a start point, such as your yard, and gives each stop its place in the route, the distance and minutes from the stop before, the minutes from the start, and the route's total stops, kilometres and minutes. It can make one route, one for each driver named in a field, or share the stops fairly between 2 to 10 trucks so each has a compact day. A route holds up to 50 stops, and each stop gets a directions link the driver can open on a phone. With Come back to the start on, the last leg back to the yard is counted.
What it leaves to you:
- Truck capacity. Stops are shared by area, not by weight or volume. If one area produces far more waste, give it two trucks or split it before routing.
- Time windows. The order is the shortest by road, not by who wants to be first. Put early customers in their own short route or move them by hand.
- Vehicle restrictions. Times and roads are worked out for a car. A refuse truck is slower and some streets are closed to it, so allow a margin and check new streets once.
- Time at each stop. Minutes are travel only. Add your own allowance per bin.
- Tipping trips. A mid-shift run to the transfer station is not planned for you. Split a long day into a morning route and an afternoon route from the station.
A made-up Tuesday in Kuala Lumpur
Say a collector in Kuala Lumpur has three rear-loader trucks and about 260 commercial customers. On Tuesdays 90 of them are due: restaurants on daily collection, plus offices and shops on their weekly or twice-weekly day.
- The customer table holds each customer's name, position, collection days and a note such as "after 22:00" or "back lane".
- Each morning a Filter keeps only customers whose collection days include today: 90 on this Tuesday.
- Eleven customers that must be emptied before 07:00 go down a separate branch to a short first route for the nearest truck.
- The remaining 79 are shared between the three trucks from the yard, about 26 stops each, with the return to the yard counted.
- At 05:00 each driver gets a message with their stops in order, each with its notes and a directions link.
The drivers stop arguing over who takes the far side of town, and the supervisor can see each route's kilometres and minutes before the shift. All the numbers here are invented to show how the parts fit together; a real round will need a few weeks of adjusting stop times and splits.
Keeping the list right
Route quality depends on the customer table more than on the planner. Three habits help:
- Every customer has a position. A customer without latitude and longitude cannot be routed and is passed on without a place in the route. Fix it in the table, not at the kerb.
- Days written the same way. Use one spelling (Mon, Tue...) so the filter catches every customer due.
- Drivers report back. The check-in at each stop lets a driver mark a stop visited or closed, with a note and a photo, so the office hears about a locked gate the same day.
Setting it up as an AI employee
- Schedule: every collection day at 04:30.
- My data: your customer table.
- Filter: collection days contain today.
- Branch, optional: early customers one way, everyone else the other.
- Route planner: Share between reps, the number of trucks, start at the yard, come back on.
- Email one per item to the right driver, or post each route to a Slack or WhatsApp group.
Adding Traffic incidents around each stop before the planner lets the message flag a closure on a street the truck will use. If you are still building the customer list, the busy restaurants and markets for commercial collection routes template finds candidates and orders them, and new restaurants and hotels for waste collection contracts brings in new openings for the sales team. The terms are explained in route planning.
Questions
Can it plan around how full the truck is?
No. It shares stops by area and orders them by road. Handle capacity by giving heavy areas more trucks or by splitting the day into two routes with a tipping run between them.
How many stops can one truck's route hold?
Up to 50. Stops past that go on without a place in the route, and the step says how many were left out.
Do the times account for a large truck?
Times and roads are worked out for a car, so a refuse truck will take longer. Add a margin and your own time per stop.
What if a customer has no address position?
It cannot be routed. Add its latitude and longitude to the table; an address alone is not enough for the route planner.
Can each driver get only their own route?
Yes. Each stop carries its route's name, so one email per item, or a filter per truck, sends each driver their own list.