FlowsBook a callSign inCreate free accountSign up
Workflows by industry

How nurseries check demand before opening a new setting

Young children living within a short drive, the nurseries already there and how they are rated: a step-by-step check for nursery operators weighing a new building.

Part of the guide Workflow automation

By the xMap team · · 4 min read

A nursery checks demand before opening by counting the young children who live within the distance parents will actually travel, then counting the nurseries and childcare centres already serving them. Children per existing setting is the first test: where it is high, places are probably scarce; where it is low, a new setting will have to win families from others. Ratings of the nurseries nearby and where parents work add the detail that turns a count into a decision.

This article is for nursery groups planning their next setting, owners of a single nursery thinking about a second, and investors looking at childcare operators. It explains what to count, how to read young children's share of an area, a made-up worked example, the mistakes that lead to half-empty rooms, and how to set up an AI employee that checks candidate addresses for you.

Who the customers really are

Parents choose a nursery close to home or close to work, and most will not drive far past a closer option that has places. That makes the catchment small: often a few minutes' drive, or a walk in dense neighbourhoods. A building in the right part of town can still fail if it sits on the wrong side of a busy road or a river from the families it hopes to serve.

So the area to study is a travel area, not a circle. The Travel area block draws the streets reachable within a travel time by car, on foot or by bike, from each candidate address.

Reading young children's share of an area

The Demographics block counts residents inside an area in nine age groups. Its youngest group is children aged 0 to 9, which is wider than the nursery age range, so treat it as a guide to how family-heavy an area is rather than an exact count of toddlers. Two measures help:

  • The number of children aged 0 to 9 inside the travel area: the size of the pool.
  • Their share of all residents (the block gives children's percentage directly): whether the area is family territory or mostly young professionals and retired people. A neighbourhood with a high share and new housing usually has growing demand.

The supply side comes from Nearby places: nurseries, preschools, kindergartens and childcare centres inside the same travel area, from xMap's places database, with ratings and reviews where they exist.

A worked example

Here is an invented comparison to show the method. A nursery group in Montreal is offered two buildings, one in an inner neighbourhood and one in a newer suburb.

Inner buildingSuburban building
Area drawn10 minutes on foot10 minutes by car
Children aged 0 to 9 inside2,4005,100
Children's share of residents7%14%
Nurseries and childcare centres inside96
Children per settingabout 270about 850
Average rating of those settings4.63.9

Made-up figures for illustration only. A real run gives the figures for your own addresses.

The suburban building looks stronger on every count: more children, a far higher share of families, fewer settings per child, and rivals that parents rate less well. The inner building would compete with nine well-rated settings for a smaller pool. Before signing, the group would still check the suburban building's drop-off: parking, the road outside at 08:00, and whether parents commuting into the city pass it on the way.

Mistakes to avoid

  • Counting all children as nursery children. The 0 to 9 group includes school-age children. Use it to compare areas, not to forecast enrolment.
  • Ignoring where parents work. A setting near a business park can fill from commuters even where few families live. Count offices and employers nearby too.
  • Using a radius. A 2 km circle may include a whole district parents never cross into.
  • Trusting ratings with few reviews. A nursery with a perfect score from three reviews tells you little about how families rate it.
  • Forgetting what opens next. Another operator may already be fitting out a unit nearby. Watch for new settings during the months it takes to open.

Doing it with an AI employee

An AI employee can score every building you are offered the same way, and then keep watch on the areas you choose.

  1. Put the candidate addresses in a table in My data (or add them as points in an Area of interest).
  2. Add Travel area for each address: 10 minutes by car, or on foot in dense areas.
  3. Add Demographics to count residents and children aged 0 to 9 inside each area.
  4. Add Nearby places set to nurseries, preschools, kindergartens and childcare centres, passing on each address with the counts.
  5. Add a Calculated field for children per setting, then Sort and limit by it.
  6. End with Email to the property team, with the ranked list and a map.

The team gets the candidates ranked with the counts behind each one. Once a building is chosen, a second flow with Only new after Nearby places, run weekly, emails any new nursery that appears in that area. The templates Where to open a nursery and New nurseries near mine are ready-made versions of both.

Questions

Can I see exactly how many under-fives live in an area?

Not exactly. The youngest age group in the population figures is 0 to 9, so it shows how family-heavy an area is rather than the precise number of nursery-age children.

What travel time should I use for a nursery?

Most families choose a setting close to home or work, so short areas work best: around 10 minutes by car in suburbs, or a 10 to 15 minute walk in dense neighbourhoods.

Does this work in the United Kingdom or the United States?

The counts of existing settings and their ratings work everywhere. Population figures do not exist for those two countries, so the children's count is not available there.

Can I be told when a new nursery opens near mine?

Yes. A weekly flow with Nearby places and Only new emails any setting that was not in earlier runs.

Templates that do this

Read next

More on workflows by industry · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.