How barber shops choose the right street to open on
A barber lives on walk-ins and regulars from nearby. How to compare candidate streets by how busy they are, when they are busy, and how many rival chairs sit close by.
Part of the guide Workflow automation
A barber shop should open on a street where people are around at the hours it cuts hair, and where the rival chairs within a short walk are few or tired. In practice that means comparing three or four candidate streets on the same three questions: how busy the pavement area is across a day and a week, which hour and which day peak, and how many barbers already trade within a few hundred metres and how well they are rated. Put those side by side and the choice is usually obvious; skip them and a good landlord pitch decides for you.
This is for owners opening a first or second shop, small barber groups adding a branch, and franchise teams who approve sites for their partners. It covers what to measure on a street, what the data can and cannot say, a made-up comparison of three streets in Toronto, the mistakes that cost barbers most, and an AI employee that runs the comparison whenever a new unit comes up.
What makes a street work for a barber
A barber is closer to a cafe than to a salon in how it earns. Many cuts are short and unplanned: someone walks past, sees an empty chair, and comes in. Regulars matter just as much, and regulars are people who live or work within a short walk. So the street has to do two jobs: put enough people past the window, and sit inside a neighbourhood where people come back every few weeks.
- How busy the area is. Not traffic on the road, but people present around the shop across the day.
- When it is busy. A street that peaks at lunch on weekdays suits an office crowd; one that peaks on Saturday afternoon suits families and students. Your opening hours should follow it.
- Rival chairs within a walk. Two barbers on one block can both do well if the street is busy, but a fourth one usually splits the same regulars.
- How those rivals are rated. A street full of shops rated 4.8 with hundreds of reviews is a hard fight. A street of tired shops with few reviews is an opening.
- Who sits next door. Gyms, cafes, transit stops and office lobbies bring the kind of passer-by who books a quick cut.
What the data can tell you, and what it cannot
Mobility Footfall measures how busy the area around a point is as people-hours of presence: someone who spends two hours near the shop counts twice as much as someone who passes for one. It is not a count of people walking past the window, and it is not a count of customers. Use it to compare candidate streets with each other, not to promise a number of cuts. Each day's figures arrive about 10 days later, and the data begins in mid-October 2026, so early comparisons rest on a few weeks. It covers most of the world, though not yet Australia.
Useful fields for a barber are the average day (footfall_daily), the busiest hour (footfall_peak_hour), how the day splits between morning, midday, evening and late night (footfall_by_part) and the busiest and quietest day of the week. A radius of up to 200 m measures the shop's own small block of the map, which is about right for a high street; wider circles blur two streets together.
Nearby places counts the barbers and salons around each candidate from xMap's places database: how many within the distance you pick, the nearest one and how far it is, their average rating and how many belong to a chain. The database is refreshed every month, so a shop that opened last week may not be in it yet. For context on how crowded grooming is in a big city: xMap's places database lists 838 beauty salons within 10 km of the centre of Toronto (November 2026), and of the 415 nearest the centre, 6 belong to a chain. Barbers are their own type of place, but the same pattern of mostly independent shops is what you should expect to find.
A worked example in Toronto (made up)
Say an owner with one shop in Toronto has three units on offer: one on a busy shopping street near a subway stop, one on a quieter residential strip, and one in a new block close to a cluster of offices. All the figures below are invented to show how the comparison reads.
| Candidate | Footfall per day (people-hours) | Busiest hour | Busiest day | Barbers within 300 m | Their average rating |
|---|---|---|---|---|---|
| Shopping street | 38,000 | 17:00 | Saturday | 5 | 4.6 |
| Residential strip | 9,500 | 18:00 | Saturday | 1 | 3.9 |
| Office block | 24,000 | 12:00 | Wednesday | 2 | 4.4 |
A made-up comparison of three candidate units. Footfall is people-hours of presence within 200 m, not people walking past.
The shopping street is the busiest by far, but five well-rated barbers already share it. The office block peaks at noon on weekdays and goes quiet at weekends, which suits a shop that opens early and closes Sunday. The residential strip is quiet, but its one rival is weakly rated, and the people there are exactly the regulars a barber wants. In this made-up case the owner might take the residential unit, open late on weekday evenings when that street peaks at 18:00, and treat the weak rival's customers as the first ones to win. The data did not make the decision; it turned three gut feelings into three clear trade-offs.
Mistakes barbers make when choosing a street
- Reading the busiest street as the best one. Busy and crowded with rivals can be worse than quiet and unserved.
- Counting every salon as a rival. A nail bar or a bridal hair studio does not compete for a skin fade. Pick barber types first, then add unisex salons separately.
- Ignoring the hour the street peaks. If the area is busiest at noon and your chairs fill after work, you will pay rent for footfall you never see.
- Trusting one week. A public holiday or a street festival can lift one week. Read several weeks once there are enough.
- Treating footfall as a customer count. People-hours compare streets; they never tell you how many cuts you will do.
Doing it with an AI employee
Comparing candidates by hand is fine once. A barber group that looks at new units every month is better served by an AI employee that runs the same comparison each time a unit comes in, so every site is judged on the same terms.
- Keep a table of candidate units in My data, one row per address, or start the flow from a Form page your agent fills in when a landlord calls.
- Nearby places counts barbers within 300 m of each unit, passing on each unit with its count, the nearest rival and their average rating.
- A second Nearby places step counts gyms, cafes and transit stops within 300 m, the neighbours that bring passers-by.
- Mobility Footfall adds the average day, the busiest hour and the busiest day within 200 m of each unit.
- xMap LLM writes two lines per unit: the main strength, the main risk and the opening hours the street suggests.
- Email sends the comparison as a table, and Show on a map saves a map with the units and their rivals.
What lands in the inbox is one email per batch of units: each candidate with its rival count, the rating it would compete against, how busy the area is and when, and a short note on fit. Ask the AI employee in the Team inbox why one unit scored lower and it answers from those same figures.
Questions
How close is too close to another barber?
There is no fixed distance. A busy shopping street can hold several barbers; a quiet residential strip often supports one. Compare the rival count with how busy the area is, and look at how well those rivals are rated.
Does footfall tell me how many people walk past my window?
No. Footfall is people-hours of presence around a point, which includes people sitting in offices and cafes nearby. It is good for comparing candidate streets with each other, not for counting passers-by or customers.
Can I check footfall for a street in Sydney or Melbourne?
Not yet: footfall covers most of the world but not Australia so far. You can still count rival barbers and their ratings there with Nearby places.
Should I open where rivals are poorly rated?
Often yes. A street whose barbers have low ratings or few reviews usually has customers who would switch to a better shop. Check that the street is busy enough to support you first.
How often should I re-run the comparison?
Each time a new unit comes up, and once a month for the streets you are watching, since footfall builds up week by week and new rivals appear in the places database every month.