Reading road traffic around ports and container terminals
Trucks queue where port roads meet terminal gates. How to measure live speed and congestion at each gate, build your own hour-by-hour picture, and what the data leaves out.
Part of the guide Location intelligence automation
The roads around a container terminal tell you, in real time, whether trucks are moving or queuing: compare the current speed on the gate approaches with the speed those roads carry when free, and watch the jam factor rise as a queue forms. Measured at each gate several times a shift and written to a sheet, those readings become your own picture of which gate jams at which hour, something no single snapshot can show. What live road data cannot tell you is how many trucks are in the queue: it measures speed, not volume.
This is for terminal operations and gate managers, port authority traffic teams, truck appointment coordinators and the planners of depots and warehouses in a port district. It covers where to put the measuring points, what each figure means, a made-up example at a European terminal, the mistakes that make port traffic data misleading, and an AI employee that keeps the log and raises an alert.
Where to measure
A port is not one place on a road map. Each gate, each approach road and each pinch point behaves on its own, and the queue at one gate can be invisible from another. Put a point at every spot where a queue changes decisions.
- Each terminal gate, on the inbound side where trucks wait to be processed.
- The junction where port traffic leaves the main road, which shows congestion before it reaches the gate.
- Empty container depots and customs inspection yards, which have queues of their own.
- Bridges, tunnels and level crossings on the way in, where one slow stretch holds everything behind it.
Traffic Flow looks at the roads around each point: the roads next to it (about 150 m), or every road within 500 m or 1 km. Points closer than about 300 m share one search, so two gates side by side will report the same figures; place them on their own approach roads if you want to tell them apart. A run measures up to 50 points.
What each figure means at a gate
| Field | What it says | How to read it at a port |
|---|---|---|
| speed_kmh | Current speed on the roads around the point | Trucks on a gate road move slowly anyway; compare with free flow |
| free_flow_kmh | Speed on those roads when they are clear | The gate's own baseline |
| jam_factor | 0 (free) to 10 (standstill or closed) | A rising jam factor is the first sign of a queue |
| congestion_pct | How much slower than free flow | Easy to compare across gates of different road types |
| roads_closed | Road stretches closed right now | A closed approach changes the route, not just the wait |
| busiest_road | The road with the highest jam factor | Tells you which approach is the problem |
| traffic_confidence | 0 to 1: how sure the measurement is | Low at night or on quiet port roads with few vehicles |
Fields Traffic Flow adds to each point, read for a port setting.
For closures and roadworks, Traffic incidents lists what online maps show as closed or under works in an area or around each point, with where each one is. Speeds tell you a road is slow; incidents often tell you why.
Building your own hour-by-hour picture
Traffic Flow is a snapshot of the moment the flow runs. To learn your port's rhythm, take the snapshot on a timetable and keep every reading. A Schedule can run every 30 minutes during the hours your gates are open, and each run can add rows to a sheet in Google Sheets: the time, each gate, its speed, free flow, jam factor and closed roads. After a few weeks the sheet shows which gate jams at which hour on which day, the evidence a truck appointment system or a change of shift times needs.
An example at a European terminal (made up)
Say a container terminal in Rotterdam has three truck gates and suspects that Gate 2 jams every weekday mid-morning while Gates 1 and 3 have capacity. The figures are invented for illustration.
- A table in My data holds the three gates and the junction where port traffic leaves the motorway, each on its own approach road.
- A Schedule runs every 30 minutes from 05:00 to 22:00 on weekdays.
- Traffic Flow measures the adjacent roads at each point.
- Each run adds four rows to the gate log in Google Sheets.
- A Branch sends any gate with a jam factor of 4 or more down its Yes path to a Slack message for the gate supervisors.
After three weeks, say the sheet shows Gate 2 at a jam factor above 5 most weekdays between 09:30 and 11:00, while Gate 3 stays under 2 at the same time. The terminal shifts some appointment slots to Gate 3 and posts the morning reading to hauliers. The Slack alert means supervisors see the queue building rather than hearing about it from drivers an hour later.
Mistakes with port traffic data
- Comparing raw speeds between gates. A gate road with a 30 km/h limit and a dual carriageway are not comparable. Use congestion or the jam factor against free flow.
- Placing two points within 300 m. They share one search and report the same figures.
- Reading a low speed at night as a jam. Check traffic confidence; few vehicles make readings less certain.
- Claiming a truck count from speeds. A slow road can be one broken-down lorry or two hundred trucks. Speed alone cannot tell.
- Measuring only once a day. Port congestion moves with vessel calls and shift changes. One reading a day misses the pattern.
What the AI employee sends
Run the flow above as an AI employee and it does two jobs. Every half hour it adds the readings to the log without anyone touching it. When a gate crosses the threshold, it posts to the supervisors at once. Add an xMap LLM step on a separate weekly flow that reads the sheet's week and writes a short summary, and each Monday the operations manager gets a note by Email: the worst hour at each gate, how it compared with the week before, and closures seen on the approaches.
Questions
Can live traffic data count the trucks waiting at a gate?
No. It measures how fast vehicles move on the roads and how congested they are, not how many vehicles there are, and it does not separate trucks from cars.
Is there historical traffic data for port roads?
Live speeds have no history of their own, so log them on a schedule to build one. Vehicle counts hour by hour since 2021 exist only for main roads in the United Arab Emirates, through Regional data sources.
How often should I measure gate traffic?
Every 30 minutes during operating hours is a good start. Port traffic changes with shifts and vessel calls, so a single daily reading misses most of the pattern.
Why do two of my gates show the same numbers?
Points within about 300 m of each other share one search. Move each point onto its own approach road, a little further apart, to measure them separately.