FlowsBook a callSign inCreate free accountSign up
Workflows by industry

How shipping and haulage firms plan around the roads into a port

Containers wait when the roads to the terminal gates jam or close. How forwarders and hauliers watch closures, speeds and arriving ships together and time their trucks.

Part of the guide Workflow automation

By the xMap team · · 5 min read

Shipping and haulage firms plan around port roads by watching three things together each morning: what is closed or under works on the roads to the terminal gates, how fast the traffic is moving on those roads right now, and which ships are arriving or waiting at anchor. Closures decide the route, speeds decide when to dispatch, and the ships tell you how many other trucks will want the same gate. A short morning note that puts the three side by side lets a dispatcher move slots before drivers sit in a queue.

This is for freight forwarders, drayage and container haulage firms, customs brokers and the logistics teams of importers who move boxes in and out of a port every day. It explains what each kind of road data can and cannot tell you, how a dispatcher reads it, a worked morning, the mistakes that waste a shift, and an AI employee that sends the note.

Why the last few kilometres decide the day

A container can cross an ocean on schedule and still miss its slot because of the final stretch between the motorway and the gate. Terminal approach roads carry heavy trucks in narrow windows, works close lanes at night and spill into the morning, and a single breakdown at a roundabout backs up every truck behind it. Because terminals book trucks into time slots, a late arrival is not just lost minutes: it can mean a missed slot, a rebooking and a waiting charge.

Three kinds of data, three different questions

  • Closures and works. Traffic incidents lists road closures, roadworks and other incidents on online maps right now, each with its street and position. Search the area around the port, or check around each gate and depot. It answers: is my route open?
  • How fast the roads move. Traffic Flow gives, for the roads around each place you name, the current speed, the speed when the roads are free, a jam factor from 0 to 10 and the busiest road. It does not count trucks or cars, and it has no history: it is the traffic at the moment the flow runs. It answers: how slow is the approach right now?
  • Who else is coming. Ships (AIS) listens to the position signals ships send and returns the vessels in the port area, with their type, speed, status and destination. Put Zone alert after it to hear only about ships that entered the anchorage or the berths since the last run. It answers: is a big discharge about to start?

In the United Arab Emirates there is a fourth source. Road traffic history, one of the Regional data datasets, counts cars and their speed hour by hour since January 2021 on the main roads near a place. A haulier serving a terminal there can see which hours are busiest on the approach on a normal Tuesday, something live speeds alone cannot show. Elsewhere, build your own picture by running Traffic Flow at the same hours every day and keeping the rows in a sheet.

A worked morning at a container port

This example is made up. A drayage firm in Rotterdam runs 40 trucks a day to two container terminals. Its flow checks the roads within 500 m of each gate and of a motorway junction on the way, lists incidents within 3 km of the port area, and counts container ships that entered the anchorage overnight.

PointSpeed nowFree-flow speedJam factorClosures within 3 km
Terminal 1 gate14 km/h48 km/h6.81 (lane closed for works)
Terminal 2 gate39 km/h45 km/h1.20
Motorway junction52 km/h90 km/h4.10

Made-up figures for one morning; three container ships entered the anchorage overnight.

The dispatcher reads it in a minute. Terminal 1's approach crawls because a lane is closed for works, and three ships are waiting, so the afternoon will be worse, not better. Trucks for Terminal 2 leave as planned. The six early slots at Terminal 1 are kept, with drivers told to use the second access road the note names, and the afternoon pickups there are moved into the evening slots after the works finish.

Mistakes that waste a shift

  • Reading a speed as a count. A slow road is not proof of many trucks; it may be one closed lane. Read speeds together with incidents.
  • Checking once and trusting it all day. Live speeds describe the moment the flow ran. For the afternoon peak, run it again in the afternoon.
  • Watching the whole port area. A large port holds dozens of roads that none of your trucks use. Name the gates, depots and junctions on your own routes.
  • Treating every ship as a busy gate. A tanker at anchor brings no containers to your terminal. Filter ships by type before counting them.

Doing it with an AI employee

One AI employee can send the dispatcher this note every working morning, and a shorter one every half hour while things are bad.

  1. Schedule: weekdays at 5:30, in the port's time zone.
  2. My data: your gates, depots and junctions, one row each, with their positions.
  3. Traffic Flow: the roads within 500 m of each point.
  4. Traffic incidents: around each point, so every gate gets the number of incidents nearby and the closest one.
  5. xMap LLM, on the whole list: write five lines for a dispatcher, worst approach first, using only these figures.
  6. An app block such as Slack or WhatsApp, or Email, to the dispatch team.

A second, separate AI employee can watch the anchorage with Ships and Zone alert every hour and post when container ships arrive. What lands each morning is a few lines: which gate is slow and why, what is closed, how many ships came in, and a suggested change. Templates to start from: road closures near the port gates each morning, ships waiting at anchor, for the berth planner and trucking companies near the port for drayage. More on the ports and shipping page.

Questions

Can xMap Flows count the trucks going into a port?

No. Traffic Flow gives live speeds and a jam factor, not counts. Hour-by-hour car counts exist only for main roads in the United Arab Emirates, through Regional data.

How often should the road check run?

Once before the first dispatch is enough for most firms. Add a check every 30 minutes during the morning if your gates jam often, and stop it at noon.

Does ship tracking cover every port well?

Coverage depends on the receivers near each port and varies a lot. Run Ships once for your port and see how many vessels it hears before relying on it.

Can the note go to drivers directly?

Yes. Send it to a WhatsApp or Slack group with an app block, but keep it short: the gate, the problem and the road to use.

Templates that do this

Read next

More on workflows by industry · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.