FlowsBook a callSign inCreate free accountSign up
Roads and traffic

Snow day traffic planning: the forecast, road speeds and closures before a winter route

What to check the evening before and the morning of a snowy day: when snow falls, how roads are moving at each stop, which are closed, and how to decide go, delay or drop.

Part of the guide Location intelligence automation

By the xMap team · · 6 min read

Snow day traffic planning comes down to three checks made at two moments. The evening before, read the forecast for each stop to see when snow is expected and how cold it stays. On the morning itself, read the live road speeds at every stop and the closures along the way. From those you decide, stop by stop, whether to go as planned, start later, or drop the call. Doing it per stop matters because snow rarely treats a whole region alike: the depot can be clear while the hill suburb is at a standstill.

This is for anyone who sends people or goods out on the road in winter: delivery and service fleets, field engineers, care providers doing home visits, school transport, sales teams. It sets out the checks, a made-up morning in Montreal, the common errors, and the AI employee that does the checking before the dispatcher arrives.

The evening before: what the forecast can tell you

The Weather forecast block gives up to 16 days for each place, day by day or hour by hour. For a winter route, ask for hour by hour over the next two days at each stop, or at each town on the route. Every hour comes back with the weather in a word, including Snow, the temperature, the precipitation and its chance, and the wind.

Three things are worth pulling out of that:

  • The hours snow is expected. Snow from 02:00 to 05:00 gives ploughs a head start before the morning round. Snow from 06:00 to 10:00 lands on the round itself.
  • Temperature around freezing. Hours where it rises just above zero and falls back are the ones that leave ice under fresh snow. Colder and steady is often easier driving than hovering at zero.
  • Wind. Strong wind with snow means drifting on open roads and poor visibility, which matters more for rural legs than city ones.

The morning: how the roads are really moving

A forecast is a prediction. By 06:00 you can replace it with evidence. Traffic Flow reads the roads around each stop at that moment and returns the current speed beside the free-flow speed, a jam factor from 0 to 10, a congestion percentage, and whether any road nearby is closed. On a snow morning the gap between the two speeds is the useful number. A road whose normal free flow is 60 km/h and is moving at 20 is telling you what the snow has done to it, whatever the forecast said.

Traffic Flow reports speeds, not vehicle counts, and only for the present moment. Very early, with few vehicles about, a reading can look better than the road deserves, so repeat it nearer departure.

Traffic incidents adds the third check: road closures, roadworks and other incidents in an area or around each stop. A closed pass or bridge decides a route more firmly than any speed.

Turning three readings into a decision

Agree simple rules in advance, so nobody argues at 06:30. For example:

What the stop showsDecision
No snow in the hours of the visit, speeds near normalGo as planned
Snow earlier, speeds at half of free flow or better, no closureGo, allow double the travel time
Snow during the visit window, or speeds under half of free flowMove to the afternoon and re-check at noon
A closure on the only approach, or traffic at a standstillDrop for today and tell the customer now

Example thresholds. Set your own for your vehicles and your roads.

The exact thresholds are yours to choose. What matters is that they exist, that they apply per stop, and that the customer hears early.

A made-up morning in Montreal

The details below are invented. A heating service firm has twelve home calls booked for Thursday across the island and the south shore. On Wednesday at 18:00 the forecast flow shows snow from 03:00 to 09:00 on the island, lighter and ending by 06:00 on the south shore, with the temperature well below freezing all day and wind rising in the afternoon.

The dispatcher gets a note that evening: expect a slow start on the island, south shore likely workable, afternoon wind may cause drifting on the exposed stretches. She messages the four earliest island customers to say their slot may slip.

At 06:15 on Thursday the morning flow runs. Seven island stops show speeds at a third of free flow. Three south shore stops are near normal. Two stops in a hillside district show a road closed nearby. The plan writes itself: the south shore crew leaves on time, the island crew starts at 10:30 once the ploughs have been through and the noon re-check confirms it, and the two hillside calls are rebooked for Friday. Ten of twelve visits happen, and no engineer spends the morning stuck.

Mistakes that turn a snow day into a lost day

  • One decision for the whole fleet. Cancelling everything because the depot is snowed in wastes the routes that were fine.
  • Deciding on the forecast alone. Forecasts miss by a few hours either way. Always follow with the morning reading.
  • Checking once. Conditions at 06:00 and 11:00 differ. Schedule a second and third check.
  • Ignoring the return leg. Afternoon wind or a refreeze at dusk can make getting back harder than getting out. Read the forecast for the hours of the return.
  • Telling customers late. A message the evening before is service. A call at the appointed time is a complaint.

The AI employee that does the checking

Two small flows cover it. The first runs at 18:00 on working days in the winter months: a Schedule, a My data table of tomorrow's stops, Weather forecast hour by hour, a Filter that keeps the hours where the weather is snow, and an xMap LLM step on the whole list that writes the dispatcher a five-line outlook. If nothing is filtered in, the note simply says a normal day is expected.

The second runs at 06:15, and again at 09:00 and noon: the same stops, Traffic Flow and Traffic incidents at each, a Calculated field for speed as a share of free flow, and the xMap LLM applying your rules to label every stop go, delay or drop. If the stops then need a new sequence, Route planner reorders the ones that are still going.

What lands is a short message to the dispatcher and each crew on Slack, WhatsApp or by Email: the labelled list, the reason for each label, and the closures. With an Approval step, the customer messages for delayed and dropped calls are drafted and wait for one click. That is the kind of morning routine an AI employee for field operations handles while the team is still clearing the yard.

Questions

Can the forecast tell me how deep the snow will be?

It tells you the hours snow is expected, the precipitation, the temperature and the wind for each place. It does not give depth on the ground or road treatment, so confirm conditions with live road speeds in the morning.

How far ahead can I see snow coming?

The Weather forecast block covers up to 16 days. For route decisions, the hour-by-hour view of the next one or two days is the most useful.

Do live road speeds show which roads have been ploughed?

Not directly. They show how fast traffic is moving compared with normal. A road moving close to its free-flow speed is passable in practice, whatever has been done to it.

Will I be told about road closures?

Yes. Traffic incidents lists closures, roadworks and other incidents in an area or near each stop, and Traffic Flow also notes closed roads around a place.

Does this predict traffic for later in the day?

No. Road speeds are a reading of the present moment. Schedule the check to run again before each part of the day you need to decide on.

Templates that do this

Read next

More on roads and traffic · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.