FlowsBook a callSign inCreate free accountSign up
Population and demographics

Population density and the gym: walk-in club or drive-in club?

Population density for a gym decides how far members travel, how big the club can be and whether it needs parking. How to read people per km² before you sign a lease.

Part of the guide Location intelligence automation

By the xMap team · · 5 min read

Population density for a gym decides more than how many people live nearby: it decides how they will reach you. Where many people live in a small area, members walk or cycle in from a few hundred metres, so a compact club on a busy street works and parking barely matters. Where people are spread out, members drive from several kilometres, so the club needs a car park, a bigger floor to justify the trip, and a location on roads people already use. Read people per km² first, then choose the format and the catchment to measure.

This article is for gym operators, franchisees and fitness property advisers deciding where a club fits and what kind of club fits there. It explains why density matters, how to measure it, a made-up comparison between a dense quarter of Paris and a suburb of Lyon, the common errors, and an AI employee that does the measuring.

Why density, not just population

Two areas can each have 60,000 residents within reach. In one, they live in apartment blocks across 3 km²; in the other, in houses across 30 km². The first supports a club people walk to, open early and late, with small changing rooms and no car park. The second supports a club people drive to, with parking, more equipment per visit and classes timed around the school run.

Density also changes how far your catchment reaches. In a dense centre, people rarely walk more than about ten minutes to train; beyond that they join something closer, because there is almost always something closer. In a spread-out suburb, a fifteen-minute drive is normal, so the catchment is wider and holds more rivals too.

  • High density: small catchment, measured on foot. Many rivals within a short walk. Convenience and opening hours win.
  • Middle density: mixed. Some members walk, many drive. Parking starts to matter.
  • Low density: wide catchment, measured by car. Fewer rivals, but each one draws from far. Size, parking and the road matter most.

How to measure it

The Demographics block gives, for any area, the number of residents, nine age groups, the area in km² and people per km². Measure it for the area members would really travel, which you draw with Travel area: a 10-minute walk in a city centre, a 10 or 15-minute drive in a suburb. Then count the gyms already inside the same area with Nearby places.

For a gym, the figure to watch inside the catchment is adults aged 20 to 59, the core of most memberships. Divide them by the number of gyms in the same area for a rough share per club, and compare it with the same share around your best existing clubs. Your own clubs tell you what works; general rules from elsewhere rarely do.

Rivals vary by city, too. xMap's places database lists 246 gyms within 10 km of the centre of Toronto and 692 within 10 km of the centre of Sydney, November 2026. Of the 246 in Toronto, 72 belong to a chain; of the 347 nearest Sydney's centre, 82 do. A dense centre with many chain clubs is a different fight from a suburb served by a few independents.

A made-up comparison: Paris and a Lyon suburb

These figures are invented to show the reasoning. A fitness brand runs two formats: a compact 24-hour club of about 600 m² and a larger club of about 2,000 m² with a car park and studios. It has one candidate building in a dense quarter of Paris and one on a retail park outside Lyon.

CandidateCatchmentAdults 20 to 59People per km²Gyms insideAdults per gym
Paris quarter10-minute walk38,00021,0009about 4,200
Lyon retail park15-minute drive71,0001,9006about 11,800

Made-up figures, for illustration only.

The Paris building suits the compact club: very dense, members on foot, many rivals but a short walk for everyone. A large club there would struggle, because few members drive in and the rent per m² would be high. The Lyon building suits the large club: fewer people per km², but nearly three times as many adults per gym in a wider drive area, and room for parking. Choosing the wrong format for either site would waste a good location.

Mistakes when using density

  • Using the same distance everywhere. A 3 km circle is a long walk in Paris and a short drive in a suburb.
  • Reading density without the rivals. A dense area with a gym on every corner may offer less room than a quieter one.
  • Ignoring daytime population. A business district has few residents but many office workers who train at lunch.
  • Measuring the whole city's density. What matters is the catchment around the building, not the average across the region.
  • Forgetting parking costs time too. In middle-density areas, a club without parking loses the drivers it was counting on.

An AI employee that sizes up each building

In xMap Flows, the measuring can be an AI employee you run whenever a new building is offered, or monthly for a shortlist. It fits the wider work of an AI employee for site selection.

  1. My data: the candidate buildings, and your existing clubs for comparison.
  2. Travel area: a walk for dense centres, a drive for suburbs.
  3. Demographics: residents, adults 20 to 59 and people per km² in each area.
  4. Nearby places: gyms inside each area, counted for each building.
  5. Calculated field: adults per gym, and a suggested format from the density.
  6. Sort and limit, then Make a report: a page per building.

What lands in the inbox is a short report: for each building, the density, the adults in reach, the gyms inside, the share per club and how that compares with your best existing clubs. The templates Where to open the next gym and Who lives around new places are ready-made starting points.

Questions

What population density does a gym need?

There is no universal number. Measure people per km² and adults per gym around your best existing clubs, then look for buildings that match those figures for the same format.

Should a gym in a dense city have parking?

Usually not much. In very dense areas most members walk or cycle, and space is better spent on the gym floor. In middle and low density areas, parking matters a lot.

How far do gym members travel?

It depends on density. In city centres many will not walk more than about ten minutes; in suburbs a fifteen-minute drive is common. Measure the travel area that fits, not a fixed circle.

Can I check density for cities in the United States?

Not with the population grid, which has no figures for the United States or the United Kingdom. Use gym counts, ratings and footfall around the building instead.

Templates that do this

Read next

More on population and demographics · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.