Population along a new metro line: residents within a walk of each planned station
Before a line opens, count who lives within a walk of every planned stop, by age, and compare the stations. A method for transport planners, developers and retailers.
Part of the guide Location intelligence automation
To estimate the population along a new metro line, place each planned station on the map, count the residents within a 500 metre and a 1 kilometre walk of it, and split them by age. Add the stations together for the line's total, and compare them with each other to see which stops will have a large home crowd from the first day and which depend on people arriving from elsewhere. The stations that do not exist yet are no obstacle: you only need their planned positions.
This guide is for transport authorities testing alignments, developers buying land near future stops, retailers and banks planning branches around them, and consultants writing the business case. It covers how to set up the stations, what to measure, a worked example on an imaginary line, the pitfalls, and a flow that recounts the corridor whenever the plan changes.
Working with stations that are still lines on a plan
Existing stations are in places databases; planned ones are not. So the starting point is your own list: a spreadsheet with each station's name and the latitude and longitude from the alignment drawing. If the plan has two options for a stop, keep both as separate rows and compare them. Moving a station a few hundred metres to the other side of a park or a highway can change its walking catchment more than any other decision on the line.
Walk distance is what matters for a metro. Most riders reach a station on foot, and the share falls away quickly beyond ten minutes. Two rings are useful: 500 metres for the people who will treat it as their own station, and 1 kilometre for the wider pool that will walk if the service is good.
What to measure at each station
- Residents within 500 m and 1 km, summed from a population grid of small hexagons.
- Working-age residents (20 to 59), the commuters most likely to ride every day.
- Children and residents aged 60 and over, which matter for step-free access, school travel and bus links.
- Overlap with existing stations: how many metro, rail and light rail stations already lie within 1 km.
- Activity around the site today: offices, shops and clinics within the walk, as a hint of trips that end there rather than start there.
A worked example on an imaginary line
Imagine a planned 12-station line across Bangkok, running from a dense old district through a new commercial area to outer housing estates. Five of its stations are shown below; the figures are invented.
| Planned station | Residents within 500 m | Within 1 km | Aged 20 to 59 within 1 km | Existing stations within 1 km |
|---|---|---|---|---|
| 1, Riverside old town | 16,200 | 52,000 | 31,000 | 2 |
| 4, Market junction | 11,400 | 41,500 | 26,800 | 0 |
| 6, Business park | 2,100 | 9,800 | 6,900 | 1 |
| 9, Housing estate north | 13,900 | 47,200 | 27,100 | 0 |
| 12, Terminus at the ring road | 4,600 | 18,300 | 10,900 | 0 |
Invented figures, for illustration only.
Station 1 is crowded but already near two stations, so some of its residents will simply switch lines. Stations 4 and 9 have large home crowds and no rail today: they are where the line adds most. Station 6 has few residents, so its case rests on the jobs in the business park. The terminus has a modest catchment on foot and would need a park-and-ride or feeder buses to fill trains.
Pitfalls when counting a corridor
- Adding overlapping rings. Stations closer than 1 km share residents. For the line total, count the corridor as one area, not the sum of the circles.
- Treating residents as riders. Residents are a ceiling on local walk-in demand, not a ridership forecast. Mode share, fares and frequency decide how many ride.
- Circles across barriers. A river or motorway inside the ring cuts the real walk. A walking area drawn on the streets avoids counting people who cannot reach the entrance.
- Ignoring future building. The grid shows who lives there now. New towers planned around stations will add people the count does not see yet.
- One count for the whole planning cycle. Alignments shift. Recount whenever a station moves.
Recounting the corridor with an AI employee
An xMap Flows AI employee can redo the count for every station each time the plan changes and send a comparable table. The planning approach is set out in the guide to AI employees for site selection.
- My data: the planned stations as a table, with name, option and position (My data). Changing a row and running again is all it takes to test a new position.
- Travel area: a 10-minute walking area around each station, on the real streets (Travel area), or plain 500 m and 1 km circles.
- Demographics: residents in each area with the age groups (Demographics).
- Nearby places with counts: metro, train and light rail stations within 1 km, plus offices and shops if you want the daytime picture (Nearby places).
- xMap LLM: one line per station on what drives its demand, written from the figures only (xMap LLM).
- Make a report: a PDF with the table, the map and the notes for the steering group (Make a report).
Each run produces the same table in the same format, so option A and option B of a station can be compared side by side. The templates New apartment buildings and malls that need a bus and Stations with no bike share or parking nearby extend the work to feeder services once the line is open. More flows are on the public transport page and the real estate page.
Questions
How far do people walk to a metro station?
Planners commonly use 500 metres for the core catchment and about 1 kilometre, a 10 to 15 minute walk, for the wider one. Testing both shows how sensitive each station is.
Can I count stations that are not built yet?
Yes. Upload their planned positions as a table. The population grid does not depend on the station existing.
Does the count forecast ridership?
No. It tells you how many people live within a walk. Ridership also depends on service, fares, jobs at the other end and competing transport.
What about stations in London or New York?
Population figures are not available in the United Kingdom or the United States yet, so this count cannot be made there. Existing stations and nearby businesses can still be listed.
Templates that do this
Read next
More on population and demographics · Every article · Templates