FlowsBook a callSign inCreate free accountSign up
Footfall and mobility

Footfall for franchise site approval: what the franchisor wants to see

Before a franchisor signs off a new unit, it asks for evidence of how busy the spot is and who trades nearby. What to put in the pack and how to gather it in an afternoon.

Part of the guide Location intelligence automation

By the xMap team · · 5 min read

When a franchisee proposes a new unit, the franchisor's site committee wants footfall for franchise site approval presented in a form it can compare with units that already work: the average day's people-hours around the door, how that presence splits across the day, the busiest days, the trend over recent weeks, and the rivals within a short walk. A pack that shows those for the candidate and for two or three proven units, measured the same way, gets a faster and fairer decision than a photo of a busy pavement.

This guide is written for franchisees preparing a submission and for franchise development teams who review dozens a year. It lists what committees usually ask, how to make the numbers comparable, a made-up worked example, the reasons packs get sent back, and an AI employee in xMap Flows that builds the same pack for every candidate.

What a site committee typically asks for

Every brand has its own checklist, but the questions about location come back to a handful.

  • How busy is the spot? Average daily footfall within a fixed distance, usually 150 to 300 metres for a shopfront.
  • When is it busy? The split between morning, midday, evening and late night, and the busiest hour. A breakfast brand and a dinner brand read the same street very differently.
  • Which days carry it? The busiest and quietest day of the week, so the committee can see whether the site depends on weekends.
  • Is it steady? The last week against the week before, read over several weeks rather than once.
  • Who else is there? Direct rivals, other units of the same brand, and the anchors that bring people: stations, supermarkets, offices, schools.
  • How does it compare? The same figures for the brand's existing units that perform well, so the committee sees the candidate on a familiar scale.

Some brands also ask how many people live within a walk or a short drive. Population figures in xMap Flows exist for some countries (among them France, Canada, India, Thailand, Egypt and Australia, but not the United Kingdom or the United States), so say plainly where that part of the pack is missing.

Making the numbers comparable

A committee cannot judge a candidate measured at 500 metres against benchmarks measured at 150. Fix the method once, write it on the first page of the pack, and use it for every unit.

  1. Choose one radius for the brand's format and keep it for every site, candidate or benchmark.
  2. Use the same window for all of them, for example the last 30 days that have data.
  3. Read weekdays and weekends separately if the brand trades very differently on each.
  4. Pick benchmarks of the same format in similar areas: a high-street unit against high-street units, a station kiosk against station kiosks.
  5. State that footfall is people-hours of presence, not visitors or transactions, so nobody mistakes it for a sales forecast.

A worked example (made up)

The brand, the sites and every figure below are invented. A smoothie franchisee in Toronto proposes a unit near a university, and the development team compares it with two units that already meet their targets.

Measure, 200 m, last 30 daysCandidateBenchmark 1Benchmark 2
People-hours a day26,50031,00022,800
Morning / midday / evening / late night18 / 41 / 29 / 1222 / 37 / 30 / 1120 / 39 / 28 / 13
Busiest dayWednesdaySaturdayThursday
Direct rivals within 300 m423

Invented figures for illustration only.

The candidate sits between the two benchmarks on presence and has the same midday-led shape that the brand's lunch menu needs. Its weakness is four rivals within 300 metres. The committee approves on condition the franchisee checks the busiest-day pattern again after the university's exam period, since a Wednesday peak near a campus may fall away in the break.

Why packs get sent back

  • No benchmarks. A figure alone means nothing. Always show proven units beside it.
  • Different methods for different sites. A wider circle for the candidate flatters it, and reviewers notice.
  • Footfall sold as customers. Calling people-hours visitors, or multiplying them by a conversion rate as if they were shoppers, undermines the whole pack.
  • One snapshot. A single week can catch a festival or a strike. Show several weeks.
  • Rivals counted by eye. A walk down the street misses units on side roads and upper floors. Use a list with distances.

Building the pack with an AI employee

Development teams that review many sites gain most from a flow that produces the same pack every time, the core idea behind an AI employee for site selection. One version runs when a franchisee submits a site through a form.

  1. Form page: the franchisee enters the candidate address and the format.
  2. My data: the brand's benchmark units, brought in so they are measured in the same run as the candidate.
  3. Mobility Footfall: footfall, busy hours, busiest days and trend, 200 metres, the last 30 days.
  4. Nearby places: the brand's rival types around each site, passed on as counts with the nearest one.
  5. xMap LLM on the whole list: compare the candidate with the benchmarks and list what the committee should ask.
  6. Make a report, emailed to the development team.

The development manager gets a PDF for each submission with the candidate and benchmarks in one table, the rival count with the nearest rival's distance, and a short note of questions. Because the method never changes, the committee can compare a site submitted in Lyon in November with one from Montreal in January on equal terms.

Questions

Is footfall enough to approve a franchise site?

No. It answers how busy the spot is and when. Committees also weigh rent, the unit itself, visibility, rivals, the franchisee and the brand's own sales data from similar units.

What radius should a franchise use for footfall?

Use the radius that matches how the format trades and keep it fixed: around 150 to 200 metres for a shopfront that relies on passers-by, wider for a destination format people travel to.

Can a franchisee run this before talking to the franchisor?

Yes. Measuring the candidate and a nearby unit of the same brand in the same way gives the franchisee a fair first read and a stronger submission.

Does footfall predict sales for the new unit?

Not directly. It is people-hours of presence, not shoppers. It is most useful as a comparison with units whose sales you already know.

Templates that do this

Read next

More on footfall and mobility · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.