Medical courier route planning: clinics and labs in order, around road closures
How a specimen courier orders a day of clinic pickups ending at the lab, flags closures on the way each morning, and keeps samples inside their transport window.
Part of the guide Workflow automation
Good medical courier route planning starts from the lab's cut-off time and works backwards: list the clinics that have samples today, put them in the shortest order that ends at the lab, then check each stop for road closures and slow traffic before the driver leaves. The order changes every day because the list of clinics changes, so the planning has to be quick enough to redo every morning.
This guide is for specimen and pharmacy courier firms, hospital logistics teams and private labs that run their own collection vans. It covers what makes lab runs different from parcel rounds, how to build the stop order, how to read closures and road speeds on top of it, a made-up example in Melbourne, the mistakes that cost a sample, and an AI employee that hands each driver a checked route at the start of the shift.
Why a lab run is not a parcel round
A parcel that arrives an hour late is an annoyance. A blood sample that sits in a hot van for too long, or reaches the lab after the last analyser batch, may have to be taken again, which means a patient called back and a clinic that trusts you less. Three things set the shape of the day:
- The lab's receiving window. Most labs batch work. Samples that arrive after a set time wait until the next batch or the next day, so the last stop is fixed and the time to reach it matters most.
- Clinic closing times. A general practice that shuts its doors at 17:00 has to be collected before then, whatever the shortest order says.
- Handling rules. Some samples must stay cool, some must be spun within a set time. These rules belong to the lab and the clinic; the route only has to respect them.
Because of this, a medical round is usually several short loops a day rather than one long one: a morning sweep, a midday sweep and a late run that ends at the lab just before its last batch.
Building the stop order
Start with the list of clinics that booked a pickup, each with a position. If your booking system holds only addresses, upload them once to My data and the rows get a position from their address and city columns. Then the Route planner block puts the stops in the best order from a start you choose, by car, on foot or by bike, and can come back to the start. Each stop gets its place in the route, the distance and minutes from the stop before, the minutes of travel from the start, and a directions link the driver can open on a phone.
Two settings matter for lab work. Start from is the depot or the driver's first clinic. Come back to the start should be on when the lab is the depot, so the loop ends where the samples are tested. If the lab is somewhere else, start the route at the lab and switch the return on: the order the planner gives you then also works read backwards, ending at the lab door.
With two or three drivers, set Routes to share the stops between a number of reps, or to one route for each value of a field such as the driver's name. A route holds up to 50 stops; past that the extra stops are listed without a place, and the step says how many.
Reading closures and traffic on top of the route
A good order on paper can fail at 08:15 because a street outside a hospital is shut for works. Two blocks look at each stop before the van leaves:
- Traffic incidents, set to look around each incoming place, adds how many closures, roadworks and other incidents are within the radius you pick and the nearest one with its distance. Positions are good to about 150 metres, and accidents are reported as road closures for now.
- Traffic Flow adds the current speed on the roads around each stop, the free-flow speed and a jam factor from 0 (free) to 10 (standstill). It gives live speeds, never a count of cars.
Neither block changes the order for you. What they do is mark the stops that need a decision: leave five minutes earlier, swap two neighbouring stops, or ring the clinic to have the box ready at the door.
A worked example in Melbourne
This example is made up. A small courier firm collects samples for a private pathology lab in the north of Melbourne. On a Tuesday, 14 clinics have booked a morning pickup and the lab wants everything by 11:30.
- At 06:30 the flow reads the day's bookings from a sheet in Google Sheets the clinics fill in.
- The Route planner orders the 14 clinics from the depot by car, coming back to the lab, which shares the depot's address. It reports the whole loop's kilometres and minutes of travel.
- Traffic incidents looks within 1 km of every stop. Two clinics near the same hospital have a road closure 300 m away.
- Traffic Flow shows the main road past three stops crawling with a high jam factor at the time of the check.
- xMap AI writes one line per flagged stop: approach the hospital clinics from the east side, allow extra minutes on the main road.
- The driver gets the route in order, each stop with its directions link and its note, and the dispatcher gets a copy.
The point of the example is the split of work: the planner orders, the live data flags, and a person decides with both in front of them.
Mistakes that cost a sample
- Planning once and reusing the order. The clinic list changes daily, and so do the roads. A fixed order from last month is usually longer than today's best.
- Checking traffic the night before. Speeds and closures at 21:00 tell you little about 08:00. Run the check shortly before the shift.
- Ignoring closing times. The shortest loop that reaches a clinic after it shut is not a route, it is a failed pickup.
- One giant loop. A single round of 40 stops keeps the first samples in the van for hours. Shorter loops that touch the lab between them keep samples fresher.
- Trusting an estimate as exact. When the routing service cannot plan the roads, the order is worked out on straight lines and the step and emails say it is an estimate. Treat those times as rough.
How to do it with an AI employee
An AI employee runs the same check every morning so the dispatcher only reads the result. In xMap Flows it is a flow of blocks, in this order:
- Schedule: every weekday at 06:30, in the lab's time zone. Add a second run at 11:00 for the afternoon loop if you have one.
- My data or New rows: the clinics that booked today, from a table or a sheet in Google Sheets.
- Route planner: the order from the depot, one route for each driver if you split by a field.
- Traffic incidents around each stop, then Traffic Flow around each stop.
- xMap LLM: a short note on each stop that has an incident nearby or a high jam factor, and nothing for the rest.
- Email to each driver, one email per item grouped by route, or a WhatsApp message, plus a copy to dispatch.
What lands in the inbox at 06:35 is a numbered list of stops for each driver, the leg times, the directions links and a few plain notes where the roads look bad. The clinics for a lab's pick-up route template finds the clinics around a lab in the first place, and road closures near my depots shows the hourly closure check on its own. The wider picture of field work with AI employees is on the field operations guide, and the healthcare page lists other flows for clinics and labs.
Questions
Can the route avoid a closed road on its own?
No. The Route planner orders the stops on the road network, and Traffic incidents marks the stops that have a closure nearby. The driver or dispatcher decides how to approach those stops.
How many clinics can one route hold?
Up to 50 stops a route. With more, split them between drivers by a field or let the planner share them between a number of drivers.
Does it know when each clinic closes?
Not by itself. Keep closing times in your clinic table and send early-closing clinics to the morning loop, or filter them into their own route.
Does Traffic Flow tell me how many cars are on the road?
No. It gives the current speed, the free-flow speed and a jam factor from 0 to 10, which is what matters for timing a pickup.
What if the routing service is not available?
The order is then worked out on straight lines with distances raised to allow for the roads, and the step and every email say the route is an estimate.