Sharjah to Dubai road traffic, counted hour by hour on the commute roads
Sharjah Dubai road traffic counted by the hour since 2021: when the morning and evening commute peaks, how it differs by direction, and how employers and shops use it.
Part of the guide Location intelligence automation
Sharjah Dubai road traffic can be read as counted cars, hour by hour, on the roads near any point along the commute, going back to January 2021. xMap's road traffic history for the United Arab Emirates gives, for each place you choose, the main road near it, the cars it carries a day in both directions, its busiest hour, the split by direction, its speed at the rush and its trend. Put points along the corridors between the two emirates and you see exactly when the morning wave into Dubai builds, when the evening wave back peaks, and how that has changed over the years.
It is for HR and facilities teams setting shift start times, schools and nurseries near the border, retailers and fuel stations on the corridor, and property teams pitching homes in Sharjah to people who work in Dubai. It covers how to place the points, what to read, a made-up example, the traps, and an AI employee that sends the commute picture each month.
Placing points along the corridor
The dataset works from places, not from road names. For each place it looks at the nearest road of each of five road classes within 500 m and picks the main road, the busiest one with a name. So the job is to put points where they sit right beside the stretch you care about: the approach to the border on each main corridor, a point in Al Nahda or Al Qusais where many commuters join, and one at the far end where the traffic spreads into Dubai's districts.
- Drop the points on the map, or put them in a table in My data with a name and their latitude and longitude.
- Run the Regional data block on United Arab Emirates, Road traffic history, with Totals for each place first.
- Check road_name and road_m for each point. If the main road picked is a service road or the wrong carriageway, set Roads to Every road nearby and keep the road you meant.
- Then ask for Hour by hour on weekdays only for the last 30 days, which gives one row per point per hour.
- Read the direction split from cars_by_direction in the totals: the morning flow towards Dubai and the evening flow back are what the commute question is about.
What the hourly profile shows
An hour-by-hour profile turns a vague sense of "bad mornings" into a shape you can plan around. A few things are worth reading on every point.
- The peak hour and how sharp it is. A peak that is twice the hour before it means a small change in start time moves people out of the worst of it.
- The shoulder. How early the climb starts, and how long the evening return stays high, decide whether staggered shifts help at all.
- Speed at the busiest hour. peak_speed_kmh and the slowest hour show when volume turns into queues.
- Direction. Both directions are counted together in the hourly rows; the daily direction split shows how lopsided the corridor is.
- The years. Month by month since January 2021 shows whether a road opening or new districts shifted the load.
A made-up example: moving a shift start
Every number is invented. A logistics company has a warehouse in Al Quoz and 140 staff who live in Sharjah. Morning shift starts at 08:00 and lateness is high. The facilities manager puts three points on the main route their bus takes. The hourly profile over 30 weekdays shows the corridor climbing from 06:00, peaking between 07:00 and 08:00, and easing sharply after 09:00, with the average speed at the busiest hour less than half the late-morning speed. The evening return peaks between 17:00 and 19:00.
The company trials a 06:30 start for half the shift and a 09:30 start for the other half. The early group's bus now travels before the steepest part of the climb, and the late group's after it. Lateness drops, and the profile is the evidence the manager shows the staff committee.
| Hour (made up) | Cars counted at the border point | Average speed |
|---|---|---|
| 06:00 | 3,100 | 88 km/h |
| 07:00 | 6,200 | 41 km/h |
| 08:00 | 5,900 | 38 km/h |
| 09:00 | 3,400 | 72 km/h |
| 10:00 | 2,700 | 86 km/h |
Invented figures for one point, both directions together, to show how the profile is read.
Traps when reading commute counts
- The wrong road. A point a little off the corridor can be matched to a parallel street. Always read road_name before the numbers.
- Both directions in one number. Hourly rows add the two directions together. Use the direction split to know which way the peak runs.
- A short window. A single week can catch a holiday or school break. Use 30 days of weekdays, and the last 12 months for the long view.
- Counts are not journeys. A count at one point does not say where the cars started or ended. It says how many passed that stretch.
- Too many rows. Hour by hour over long periods for many points hits the run's row limit of 5,000. Keep it to a few points and a month at a time.
An AI employee that sends the commute picture
The reading is worth repeating, because roads, schools and districts change. An AI employee in xMap Flows can send it every month. See location intelligence automation for the broader idea.
- Schedule: the first working day of each month.
- My data: the corridor points.
- Regional data: Road traffic history, last 30 days, weekdays only, Hour by hour.
- Data analyst: "For each point, the average cars and speed for each hour of the day, and the peak hour".
- Make a report: the hourly table and chart for each point.
- Email: the PDF to facilities and HR.
Each month the team receives one PDF with the commute profile at every point, the peak hour and its speed. A second, rarer flow can ask for Month by month since January 2021 and show how the corridor has grown.
Questions
How far back do the counts go?
Road traffic history covers roads in the United Arab Emirates hour by hour from January 2021 up to a few days ago.
Can I see cars going towards Dubai separately from cars going towards Sharjah?
The totals give cars a day in each direction. The hourly rows count both directions together, so read the direction split beside the hourly profile.
Does it name the road?
Yes, the main road near each point with its class and distance; street names come as the data has them, often in Arabic.
Is this the same as live traffic speeds?
No. These are counted cars and their speeds in the past. For how the roads are moving right now, use Traffic Flow, which gives live speeds but no car counts.