FlowsBook a callSign inCreate free accountSign up
Site selection and expansion

Car wash site selection: matching the plot to the kind of wash

Car wash site selection starts with the wash you run: a membership tunnel, a self-serve bay or a hand wash. What each needs from homes, errands, rivals and the road.

Part of the guide AI employee for site selection

By the xMap team · · 5 min read

Good car wash site selection starts with the kind of wash, because a membership tunnel, a self-serve bay and a hand-wash bay live on different customers. A tunnel that sells monthly plans needs thousands of car-owning households within a short drive and a road people use on their errands; a self-serve site needs cheap land near dense housing; a hand wash or detailer needs people who park for a while nearby. Once you know which you are, check four things around each plot: who lives within a few minutes' drive, which errands bring drivers past, how many washes already serve them and how well, and how the road moves at the hours you would be busiest.

This article is for owners and expansion managers of car wash chains, fuel retailers adding a wash, and investors looking at a plot. It goes through each wash model, the checks that matter for it, a made-up comparison of three plots in Melbourne, and an AI employee that screens every plot an agent sends you.

Three kinds of wash, three kinds of site

  • Express tunnel with monthly plans. Members come back often, so the site lives on households within a few minutes' drive rather than on passing trade. Many members wash on the way to or from the supermarket, the gym or work.
  • Self-serve bays and in-bay automatics. Lower spend per visit and longer opening hours. Dense housing with little private space to wash a car at home is the strongest pull.
  • Hand wash and detailing. Each job takes from twenty minutes to several hours. People leave the car while they shop, work or train, so a mall car park, an office district or a gym next door brings the custom.

The four checks around a plot

  1. Homes within a short drive. Draw the area reachable in, say, 8 or 10 minutes by car with Travel area. Where population data exists, Demographics counts the residents inside it (it covers about 100 countries, including Australia, Canada, France and India, but not the United Kingdom or the United States). It counts people, not cars, so use it to compare plots, not to forecast washes.
  2. Errand anchors. Nearby places counts supermarkets, fuel stations, gyms, hardware stores and malls within a kilometre. A plot beside a busy supermarket gets drivers who are already out.
  3. Rival washes. The same block lists car washes and detailers around the plot with their ratings and review counts. Count them inside the drive-time area, not just next door, because a member drives a few minutes to the wash they pay for.
  4. How the road moves. Traffic Flow gives the live speed, the free-flow speed and the jam factor on the roads beside the plot. It does not count cars. Run it on a Saturday morning and a weekday evening, the hours a wash fills, and see whether traffic is slow enough for drivers to turn in and whether a queue would spill onto a jammed road.

A made-up example: three plots in Melbourne

Say an express tunnel operator is offered three plots in Melbourne's suburbs. The figures below are made up to show the reasoning.

PlotResidents within 10 minAnchors within 1 kmRival washes within 10 minSaturday 10:00 speed vs free flow
A, next to a supermarket112,000Supermarket, gym, hardware store4, two rated under 428 of 60 km/h
B, on an arterial road96,000Fuel station257 of 60 km/h
C, in a retail park131,000Mall, two supermarkets9, most rated 4.5 or more11 of 50 km/h

A made-up comparison; real figures come from the blocks named above.

Plot C has the most residents and anchors, but nine well-rated washes already serve them and its road crawls on a Saturday, so a queue would block the retail park entrance. Plot B is easy to reach and has few rivals, yet traffic passes at close to full speed with only a fuel station to stop for. Plot A has enough homes, a supermarket that brings errands past, weak rivals and a road moving at about half its free-flow speed. For a membership tunnel, A is the one to negotiate, after a visit to check room for several cars to wait off the road.

Mistakes to avoid

  • Choosing the busiest road. A fast road with nothing to stop for sends drivers past. Speed and an errand nearby matter more than a road being major.
  • Counting rivals within a few hundred metres only. A member drives several minutes to the wash they pay for. Count inside the drive-time area.
  • Mixing wash models in one count. A hand-wash bay in a mall car park does not compete with an express tunnel the way another tunnel does. Look at what each rival is before counting it.
  • Trusting one traffic reading. A single run is one moment. Measure the same hours on several days before deciding.
  • Forgetting the queue. No data source tells you whether the plot fits a stack of waiting cars. Walk it.

Screening plots with an AI employee

In xMap Flows an AI employee can run the four checks on every plot you are offered and send a ranked shortlist. It follows the steps in the site selection guide.

  1. New rows: a sheet in Google Sheets where you paste each plot's address as agents send them.
  2. Travel area: 10 minutes by car around each plot.
  3. Demographics: residents inside each area, where the country has population data.
  4. Nearby places in counting mode: rival car washes inside the area, and a second Nearby places for supermarkets, gyms and fuel stations within 1 km.
  5. Traffic Flow: speed and jam factor on the adjacent roads at the moment the row arrives.
  6. xMap LLM: a score out of 100 for an express tunnel (or your model), with two lines on why.
  7. Email or Make a report to the expansion team.

Each plot comes back in the inbox with its residents, anchors, rivals and their ratings, the road speed, the score and the reason. To look for gaps instead of judging plots you were sent, start from the template busy spots with the fewest car washes; suppliers of wash products can use new car washes and detailers for my products to follow openings.

Questions

How many residents does a car wash need nearby?

It depends on the model, your prices and how often people wash where you are. Compare plots against your own best-performing sites rather than a rule of thumb from another market.

Can I see how many cars pass a plot?

Only for roads in the United Arab Emirates, hour by hour since January 2021, through Road traffic history. Elsewhere Traffic Flow gives live speed and congestion, which tells you how easy the plot is to reach and turn into.

Is being next to a fuel station good or bad?

A fuel stop brings drivers who are already pulling in, which helps, unless the station has its own wash. Check what the station offers before counting it as an anchor.

Should a car wash be on the inbound or outbound side of a road?

Many drivers wash on the way home or on a weekend errand. Watch which direction slows at those hours and whether turning in means crossing traffic.

Templates that do this

Read next

More on site selection and expansion · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.