Where to place defibrillators: using residents and daytime crowds
Deciding where to place defibrillators for public access: weigh the people who live nearby against the places that are busiest by day, and find the gaps between devices.
Part of the guide Location intelligence automation
When deciding where to place defibrillators for public use, put them where many people are within a few minutes' walk and none is already close: a device helps only if someone can fetch it and be back at the patient's side quickly. That means looking at two maps together, where people live (for cardiac arrests at home and in residential streets) and where people gather by day (stations, shopping streets, sports grounds, offices), and then marking the spots that are far from any device you already have.
This is for councils, ambulance services, community heart charities, property managers and employers planning public access devices. It explains the two kinds of people to count, how to find the gaps, a made-up example, the traps, and a flow an AI employee runs to keep the plan up to date.
Residents and daytime crowds are different maps
The Demographics block counts residents in small hexagons of about 0.1 km², with age groups. Older residents matter here: the over-60 share of each cell points to the streets where a device near home is most likely to be needed.
Mobility Footfall measures something else: how busy the area around a place is, in people-hours of presence. Someone who stays three hours counts three times, so it is a measure of how crowded a spot is through the day, not of how many different people pass. It also splits the day into morning, midday, evening and late night, and gives the busiest hour.
- Footfall data starts in mid-October 2026, so it shows recent weeks, not past seasons; there is no year-on-year comparison yet.
- Each day arrives about 10 days late.
- Australia is not covered yet, while resident counts are. Resident counts in turn are missing in the United Kingdom and the United States.
Keep the two in separate columns. A station with a huge daytime crowd and few residents and a quiet estate with many older residents can both deserve a device, for different reasons.
Finding the gaps between devices
Upload your existing devices as a CSV, with a name and a position for each. The Find nearest block then gives every hexagon or candidate spot the nearest device and its straight-line distance. Cells with many residents and no device within, say, 400 m are the residential gaps. Candidate public spots with heavy footfall and no device near are the daytime gaps.
A made-up example
Invented figures: a city's heart charity in Paris checks four candidate spots and the cells around them.
| Made-up spot | Residents within 400 m | Over-60 share | Nearest device | Busiest part of the day |
|---|---|---|---|---|
| Market square | 3,100 | 31% | 650 m | Midday |
| Railway station hall | 900 | 12% | 120 m | Morning |
| Sports centre | 2,400 | 18% | 900 m | Evening |
| Housing estate centre | 4,200 | 27% | 800 m | No footfall reading yet |
Invented figures to explain the reading; not data about Paris.
The station is busy but already has a device 120 m away, so it drops down the list. The housing estate has the most residents, a high share of over-60s and the nearest device 800 m off: first on the list. The market square and the sports centre follow, each with a busy part of the day when a device would be within reach of many people. Note the estate's missing footfall reading: it is no reading, not zero people.
Traps to avoid
- Reading footfall as visitor numbers. It is people-hours; compare spots with each other, not with ticket or turnstile counts.
- Placing devices only where it is busy. Many cardiac arrests happen at home; residents count too.
- Ignoring opening hours. A device inside a shop that closes at 6 pm is not there at night. Note access hours in your own table.
- Trusting an old device list. Devices are moved or removed; check yours before you plan.
An AI employee for the placement plan
- Schedule: once a month.
- Area of interest: the district you cover.
- Demographics: Every hexagon, with age groups.
- Find nearest: your device list, nearest to each cell.
- Filter: cells with many residents and no device within your distance.
- Show on a map and Email to the planning lead.
A second, smaller flow checks candidate public spots with Mobility Footfall (up to 50 places a run) for the busiest part of each day. The lead gets a map of residential gaps and a ranked list of busy spots far from any device. The Civil defence points near the most people and Nearest ambulance to each accident templates use the same pieces. For more on running this kind of work every month, see the field operations guide.
Questions
Does xMap know where existing defibrillators are?
Do not rely on it. Upload your own register as a CSV and use Find nearest, so the gaps are measured against the devices you know are there.
Is footfall the number of people who walk past?
No. It is people-hours of presence: a measure of how busy an area is, where someone who stays longer counts more.
How far apart should devices be?
That is a local medical decision. The flow measures distance; set the threshold your ambulance service or heart charity recommends.
Can I compare this year's footfall with last year's?
Not yet. Footfall history starts in mid-October 2026.
Templates that do this
Read next
More on population and demographics · Every article · Templates