FlowsBook a callSign inCreate free accountSign up
Footfall and mobility

Footfall counter vs location data: entries at the door or presence around it

A door counter tells you who came in; area footfall tells you how busy the street outside was. What each measures, where each falls short, and how to use them together.

Part of the guide Location intelligence automation

By the xMap team · · 5 min read

The short answer to footfall counter vs location data is that they measure different things and answer different questions. A counter at your door counts entries into your own store, exactly and in real time, but only once the store is open and only for that door. Location-based footfall measures presence in the area around a point, in people-hours, for any place in most of the world, including shops you do not own and sites you have not leased yet, but it arrives about ten days late and never says who came inside. Most retailers who have both use the counter to run the store and the area figure to choose sites and explain changes.

This piece is for store operations, retail analytics and property teams deciding whether to install counters, buy location data or both. It compares the two directly, works through a made-up case, lists the traps in mixing them, and shows how to bring area footfall into a weekly store review.

What each one actually counts

Door counterArea footfall
UnitEntries (sometimes exits) through a doorPeople-hours of presence in the area around a point
WhereOnly doors where a sensor is installedAny point in the areas covered
WhenLive, from the day it is installedEach day about ten days later, from mid-October 2026
Before you openNothing to measureWorks for candidate sites and empty units
CompetitorsNoYes, around any address
Who comes inYes, as a countNo; it describes the area, not your shop

Footfall here means Mobility Footfall in xMap Flows; no footfall data covers Australia yet.

A counter is the right tool for conversion rates, staffing by the quarter hour and checking whether a promotion pulled people through the door this morning. Mobility Footfall is the right tool for comparing a dozen possible sites, seeing whether the whole street got busier or only you did, and understanding the hours and days around a store you have not yet opened.

Why the two numbers never match

People sometimes put the two side by side and expect one to be a share of the other. They are different units. A counter adds one for each entry, so a customer who leaves and comes back adds two. Area footfall adds the hours people spend in a hexagon of about 0.1 km² or more, which includes the pavement, the shops next door, the flats above and the bus stop. Dividing entries by people-hours does not give a capture rate in percent.

What does work is the ratio as an index. Track entries divided by area footfall week after week for the same store. If the ratio falls while area footfall holds steady, fewer of the people around you are coming in: look at the window, the queue or the competitor that opened next door. If both fall together, the street went quiet and the store is not to blame.

A made-up case: two stores, one question

These figures are invented to illustrate the reasoning. A shoe retailer in Lyon sees entries drop at two stores over the same four weeks and has to decide where to act.

StoreEntries, change over four weeksArea footfall, changeIndex of entries to footfall
City centre store-18%-17%flat
Neighbourhood store-15%+2%falling

Invented figures for illustration only.

At the centre store the whole area quietened, perhaps roadworks or a closed station entrance nearby, and the store held its share. Nothing to fix inside. At the neighbourhood store the street was as busy as ever but fewer people came in. The manager checks and finds a new competitor two doors down with an opening offer. The counter alone showed two similar falls; the area figure told them apart.

Remember the delay when doing this. The counter shows the drop the same week; the area figure confirms the cause about ten days later. That is usually fast enough for a decision about a refit or a local campaign.

Mistakes when mixing the two

  • Reading the index as a percentage of passers-by. It is a trend line for one store, not a capture rate.
  • Comparing indexes across stores. Each store's area has different neighbours and hexagon size. Compare a store with itself over time.
  • Changing the radius. Keep the area setting fixed or the index jumps for no reason.
  • Buying counters to choose sites. A counter needs a store; use area footfall before you sign.
  • Expecting area footfall today. Use the counter for the same-day view.

Bringing area footfall into the weekly store review

Many retailers already export counter totals to a table. In xMap Flows an AI employee can add the area figure beside them every week, the kind of quiet routine described in AI employees.

  1. Schedule: every Tuesday, once the counter export for last week is in.
  2. My data: your stores, with last week's entries from the counter system in a column.
  3. Mobility Footfall: Footfall and Trend, 200 m, the last 7 days, so each store gets its area footfall and the week-on-week change.
  4. Calculated field: index = entries divided by footfall_daily times 1,000, to keep the number readable.
  5. Nearby places: competitors of your kind within 300 m, so a new rival shows up beside a falling index.
  6. xMap LLM: for each store, say in one sentence whether the street or the store explains the week.
  7. Email to the operations team.

In the inbox each week: every store's entries, area footfall, index and competitor count, with a sentence on what changed. Note that the area figure covers days about ten days earlier than the counter week, and the email should say which dates. The new restaurants opening near my branches template shows the competitor half on its own, and score every neighbourhood for a new branch covers the site-selection side.

Questions

Should I buy door counters or location footfall data?

Counters if your question is what happens inside your own stores today; location data if you need to compare sites, streets or competitors. Many teams use both.

Can area footfall replace a door counter?

No. It measures presence around a place, not entries, and it arrives about ten days late.

Can I work out a capture rate from the two?

Not as a true percentage, because the units differ. Track entries divided by area footfall as an index for the same store over time.

Does area footfall work before a store opens?

Yes. It measures any point in the areas covered, which is why it suits site selection.

Templates that do this

Read next

More on footfall and mobility · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.