FlowsBook a callSign inCreate free accountSign up
Workflows by industry

How truck stop operators pick sites on freight roads

A truck stop lives on the road beside it and the gaps along the route. How to read live road speeds, the services already there and the distance to the next stop.

Part of the guide Workflow automation

By the xMap team · · 5 min read

A truck stop operator picks a site on a freight road by checking three things: how the traffic moves on the road at the hours drivers need a break, what fuel, food, tyre and rest services already sit along the same stretch, and how far a driver has travelled since the last good stop. The best sites sit where a long gap in services meets a road that flows steadily, with room for trucks to turn in safely. A site in the middle of a cluster of fuel stations, or on a road that jams every afternoon, rarely earns its land.

This is for operators of truck stops, fuel and service plazas, and the mining, oil and gas companies that plan rest areas and contractor services along haul corridors. It explains how to map the services along a route, what live road speeds can and cannot tell you, a made-up example on a mining corridor in northern Chile, the usual mistakes, and how an AI employee keeps the corridor map current.

Map what drivers can already get along the route

Drivers stop for fuel, food, a shower, a bed, a tyre or a repair. A corridor that offers all of these every hour of driving needs no new stop; a corridor with a 200 km stretch of nothing has a gap a driver feels. Start by listing every service on the route, town by town.

Nearby places searches xMap's places database around each town or point along the corridor for the kinds you name: truck stops, gas stations, tyre shops, truck repair, motels, restaurants. Each place comes with its distance from the point searched, its rating, whether it is open, and whether it belongs to a chain. Searching around each town on the road, rather than one big circle, keeps the results on the route and not in suburbs off it.

A Place classifier step then sorts them into your own short list of labels, such as Truck stop, Fuel only, Tyres and repairs, and Food and beds, so the map reads at a glance.

What live road speeds tell a truck stop

Traffic Flow measures, around each candidate site, how fast the traffic is moving right now, how fast the same roads move when they are free, the jam factor from 0 to 10, how many road stretches were measured and how many are closed. It is a reading of the moment the flow runs.

  • A road that flows near its free speed at the hours drivers stop is a road where a turn-in lane is safe and a stop is reached on time.
  • A road that jams every afternoon means drivers arrive late and tired, and trucks queue to get back on the road.
  • Closed stretches near the site, seen again and again, can mean roadworks that will change the route for months.

A worked example: a mining corridor in northern Chile

This example is made up. Say an operator wants a new rest and fuel stop on the road that carries supplies between the port city of Antofagasta and the mining town of Calama. The team marks six points along the road: the two cities, and four towns and junctions between them.

  1. Search 10 km around each point for truck stops, gas stations, tyre shops and motels.
  2. Classify the results and count them per point.
  3. Read Traffic Flow within 1 km of each point at 07:00, 13:00 and 18:00 on weekdays for two weeks.
  4. Lay the counts and speeds side by side, in driving order along the road.

In the made-up result, the two cities have many fuel stations but few places a truck can park overnight. One junction about halfway has a single fuel station and nothing else, and the road there flows close to its free speed at every reading. That junction goes to the top of the shortlist for a land visit; the busy city edges, where the road jams at shift change, go to the bottom.

Mistakes to avoid

  • One big circle around a city. It mixes services on the freight road with services in neighbourhoods trucks never enter.
  • Treating every gas station as a truck stop. A forecourt built for cars may have no room for a truck to turn. Classify them, and check the ones that matter on the map.
  • Reading traffic once. A single reading at a quiet hour flatters a road that jams at shift change.
  • Expecting vehicle counts. Live speeds show how a road flows, not how many trucks pass. Use your own fleet or partner data for volumes.
  • Forgetting closures. A site on a road under months of roadworks will open to an empty lane.

How to run it with an AI employee

The template Truck stops and fuel along the haul corridor keeps a corridor map up to date each month. Add Traffic Flow to it, or build this in one sentence with Ask xMap. The blocks, in order:

  1. Schedule: weekdays at the hours your drivers stop, or once a month for the services map.
  2. Area of interest: the towns and junctions along the corridor.
  3. Nearby places: truck stops, gas stations, tyre shops and motels.
  4. Place classifier: your own labels.
  5. Traffic Flow: within 1 km of each candidate point.
  6. xMap LLM: one line per point on what is missing and how the road moves.
  7. Show on a map and Email: the corridor map and the table to the network team.

What lands in the inbox is a map of the corridor coloured by kind of service, a table of each point with its counts, speed, free-flow speed and jam factor, and a short note on the gaps. Run it after each month's update and the team sees new rivals on the road the week they appear. For closures along the road every morning, the template Road closures on the convoy route each morning watches with Traffic incidents.

Questions

Can I see how many trucks use a road?

Not from Traffic Flow, which measures speeds and congestion, never vehicle counts. Hour-by-hour car counts exist only for roads in the United Arab Emirates, in Regional data.

How far apart should I search along a corridor?

Search around each town, junction or point where a stop is possible, at a radius that covers the road near it, such as 10 km. One search per point keeps the results on the route.

Do remote roads have live speeds?

Some do and some have few measured stretches. The roads_measured field says how many were measured around each point, so you can tell a quiet road from a road with no reading.

How do I watch for new rival stations?

Run the services search monthly with Only new, or use the template New fuel stations in my region, by brand, which lists stations that opened in the last year.

Templates that do this

Read next

More on workflows by industry · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.