Walking time from station to office: measuring it before you sign
Listings say five minutes from the station. How to measure the real walk along the streets, compare buildings fairly, and spot offices that only look close.
Part of the guide Location intelligence automation
The walking time from station to office is one of the first things staff notice about a new workplace and one of the least checked before a lease is signed. A building that is 400 metres from a station on the map can be an eight-minute walk once you add the long way round a rail line, a wide road with one crossing, or an exit on the wrong side of the platform. The fair way to compare buildings is to draw the area that can really be walked from each station in five, ten and fifteen minutes along the streets, and see which offices fall inside.
This guide is for companies choosing an office, the agents who show them buildings, and landlords who want to market a building's access honestly. It explains why straight lines mislead, how to draw walking areas, a worked comparison in Singapore, what to watch for, and an AI employee that screens a shortlist for you.
Why the map distance misleads
Distance in a straight line ignores everything that slows a person on foot.
- Barriers. Rail lines, rivers, motorways and large sites with no public path through them.
- Crossings. A wide road with one signalled crossing adds minutes at every peak.
- Station exits. Big stations have exits hundreds of metres apart. Measure from the exit staff would use, not the station's centre.
- Hills and steps. Not in a flat time estimate, but staff feel them. Walk the route once yourself.
Drawing the walk
The Travel area block draws the area reachable within a travel time or a road distance, following the streets and paths, with walking as one of its modes. Give it a station exit, or several, and it returns one walking area for each. Blocks after it search inside those shapes. For example, Nearby places can list office buildings, coworking spaces and business centres inside the 10-minute walk.
It works the other way round too. Put your candidate buildings in first and draw a 10-minute walk around each, then ask Nearby places which stations fall inside. A building with two lines within ten minutes is a different proposition from one with a single bus stop.
A worked comparison in Singapore
Say a firm is choosing between three buildings in Singapore. This is an invented example showing the method, not real buildings.
| Building (example) | Listing says | Inside 10-minute walk of | What the walk showed |
|---|---|---|---|
| A | 2 min to MRT | Two lines' stations | True: direct covered route |
| B | 5 min to MRT | One station | Only from the far exit; 9 minutes from the main one |
| C | Near MRT | No station | A 13-minute walk round an expressway |
Invented figures to show how the areas compare buildings; real runs draw the areas along the streets.
Building C was the cheapest per square metre, and the agent's description was not false. But for 120 staff arriving by train each morning, the extra minutes each way add up to a lot of lost time and some lost goodwill. The firm took B and negotiated using the walk.
The same areas help after the move, too. A new joiner pack that says which exit to use and which way to walk saves everyone the first-week detour, and HR can see at once which staff postcodes are well served by the lines that stop inside the 10-minute walk.
What else to look for on the walk
Once the walking area is drawn, a few more searches make the picture more useful for staff.
- Cafes, lunch places and convenience stores along the route and near the office.
- Gyms and childcare inside a 10-minute walk, often asked about in staff surveys.
- Pharmacies and clinics nearby.
- Bus stops for the staff the rail network does not serve.
Mistakes to avoid
- Comparing listings' own walking claims. They are measured differently by every agent.
- Measuring from one station point instead of the exits.
- Forgetting staff who do not come by train. Draw a car or cycling area too if many drive or ride.
- Looking at the office alone. The walk from a station to a site visit matters for client-facing teams as well.
Screening a shortlist with an AI employee
- Put the candidate buildings in a table in My data, or send them from a form.
- Travel area draws a 10-minute walk around each building.
- Nearby places, set to pass on each incoming place with counts, counts train and metro stations, cafes and gyms inside each walk.
- Sort and limit puts the buildings with the most stations first.
- Email or Make a report sends the comparison with a map.
The Who and what is within a 15-minute walk of a planned station template uses the same walking areas, and Business parks far from stations, for employer shuttles shows the opposite case. Agents who compare sites often can read more in the guide to AI employees for site selection.
Questions
How long is a reasonable walk from a station to an office?
Many people treat about ten minutes as easy and fifteen as the limit for a daily walk, but it depends on the city and the weather. What matters most is comparing buildings with the same measure.
Does the walking area follow real streets?
Yes. Travel area follows the streets and paths, so rivers, rail lines and roads without crossings shape the area.
Can I compare several buildings at once?
Yes. Each building in the table gets its own walking area, and the counts of stations and services inside each one can be sorted side by side.
Can it measure from a particular station exit?
Yes. Pick the exit's position on the map and the walking area is drawn from there.