FlowsBook a callSign inCreate free accountSign up
Roads and traffic

Road speed near a hospital: keeping the way in clear for ambulances

Ambulances need the last kilometre into a hospital to move. How hospital and emergency teams read live road speeds, jams and closures around their entrances each day.

Part of the guide Location intelligence automation

By the xMap team · · 5 min read

The roads that matter most for ambulance access are the last kilometre or two into the hospital: the junctions before the emergency entrance, the road past the ambulance bay, and the one or two main roads that feed them. Live traffic data tells you, at any moment, how fast traffic is moving on those roads against its free-flow speed, how jammed they are on a scale from 0 to 10, and whether a stretch is closed. Checked at the same hours every day, and alongside road closures and roadworks, it shows which approaches slow down when, so the hospital can plan diversions, talk to the road authority and brief ambulance crews before a bad week rather than after it.

This article is for hospital estates and facilities teams, emergency department managers, ambulance service planners and private ambulance operators. It covers what live road data can say about access, where to measure, a made-up week in Paris, what this kind of check is not, and an AI employee that sends a short access note every morning.

What live road data says, and what it cannot

The Traffic Flow block measures the roads around each point you give, at the moment the flow runs, within about 150 m, 500 m or 1 km. Each point gets the current speed and free-flow speed in km/h, the jam factor, congestion as a percentage, a level in words (Free flowing, Light, Moderate, Heavy, Standstill), how many road stretches were measured, how many are closed, and the busiest road.

Three things it does not do. It does not count vehicles. It does not know which way the slow traffic is going on a two-way road. And it does not measure ambulances or response times: an ambulance with lights on moves differently from the traffic around it, though a road at standstill slows everyone. Treat the readings as the conditions an ambulance meets, not as its journey time.

Where to measure

  • The emergency entrance road, a point right at the turn into the ambulance bay.
  • The last junction on each main approach, usually 300 m to 1 km out.
  • The feeder roads ambulances use from the busiest districts the hospital serves.
  • The staff and visitor car park entrances, which can back up onto the same road and block the bay.
  • School frontages and market streets on the approach, if they jam at set hours.

Points closer than 300 m share one measurement, so spread them along each approach. Name each point in a table in My data, for example Approach from the north, junction before the bridge.

Adding closures, and distances that follow the roads

Speed explains how a road flows; it does not say why. The Traffic incidents block, set to look around each incoming place, adds how many closures, roadworks and other incidents shown on online maps are near each point and the nearest one with its distance. A planned closure on a feeder road is often visible days ahead, which is when a hospital can still ask for a different timing or agree a diversion.

For the wider picture, a Travel area draws what can be reached from the hospital by car in a set time, along the roads rather than as a circle. It uses typical road speeds, not this morning's traffic, so read it as the usual reach and use live speeds for the day's conditions. To see which neighbourhoods lie furthest from any hospital in the first place, the template Neighbourhoods far from a hospital starts from the same idea.

A made-up week in Paris

Say a hospital group in Paris measures seven points around one of its emergency departments, three times a day for a week: 08:00, 13:00 and 18:00. In this invented case, the northern approach reads Free flowing or Light every morning and Heavy every evening between Monday and Thursday, with the busiest road the same boulevard each time. The eastern approach is Light at all hours until Wednesday, when roadworks appear 600 m from the hospital and its jam factor stays above 7 for the rest of the week. The entrance road itself is Moderate only at 13:00, when visitors arrive and the car park queue spills out.

  1. The ambulance service is told the eastern roadworks on Wednesday morning, with the nearest alternative that reads Light, and crews avoid it for the rest of the week.
  2. Estates asks the city about the length of the works and whether night working is possible.
  3. The hospital moves visiting hours for one ward by thirty minutes as a test, to see whether the 13:00 queue on the entrance road eases.
  4. The northern evening slowdown, seen every day, goes into the hospital's routine briefing to crews, rather than surprising them.

Mistakes to avoid

  • One reading a day. Access problems are often at one hour. Measure at the hours your emergency department is busiest and at the school and commute peaks.
  • Watching only the entrance. The bay can be clear while the last junction is at standstill.
  • Reading a slow road as dangerous. A low speed in a 30 km/h zone may be normal. Compare current speed with free-flow speed, or use the jam factor, which already does that.
  • Hearing about roadworks from crews. Closures appear in the data when they start, and planned works often earlier; check every morning.

An AI employee that sends the morning access note

A Schedule at 07:00 every day, My data with your points, Traffic Flow at about 150 m for each, Traffic incidents within 1 km of each, a Filter that keeps the points with a jam factor of 5 or more or an incident nearby, and an Email to the duty manager and the ambulance liaison. On a clear morning the email says so in one line; on another it lists each affected point with its speed against free flow, its level and the nearest closure. If you keep the ambulance bases in a CSV, Find nearest can add the nearest base to each closure, as in the template Nearest ambulance to each accident. The template Road closures near hospitals each morning is the quickest start.

Questions

Does this measure ambulance response times?

No. It measures how traffic moves on the roads around each point and whether they are closed. Response times come from the ambulance service's own records.

Can it count how many cars pass the hospital?

No. Live traffic data gives speeds and the jam factor, not car counts. Car counts by hour exist only for roads in the United Arab Emirates, through Regional data.

How often should the roads be checked?

At the hours that matter to you: often three times a day is enough to see patterns, with a schedule every 15 or 30 minutes during a known problem such as major roadworks.

Will it see planned roadworks?

It sees closures and roadworks shown on online maps when they are listed, which is often when they start and sometimes earlier.

Templates that do this

Read next

More on roads and traffic · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.