FlowsBook a callSign inCreate free accountSign up
Roads and traffic

Lagos traffic delivery planning: bridges, speeds and the van day

Island or Mainland, bridge before or after the peak: a practical way for delivery firms in Lagos to read live road speeds and incidents and set each van's day.

Part of the guide Location intelligence automation

By the xMap team · · 4 min read

Lagos traffic delivery planning starts with one decision: which side of the lagoon each van works on, and when it crosses. The bridges between the Mainland and the Island carry most of the cross-city traffic and slow to a crawl at the peaks, so a van that crosses at the wrong hour can lose half its morning. Plan each van's day on one side where you can, schedule unavoidable crossings for the quieter hours, and check live speeds on the bridges and main expressways, plus any incidents near your drops, before the first van leaves the depot.

This is for operations leads at e-commerce, grocery, pharmacy and parts distributors running vans or motorbikes in Lagos, and for third-party delivery firms serving them. It looks at the city's crossings, the readings that matter, a made-up depot day, honest limits of the data, and an AI employee that sends the road picture every morning and at midday.

Why Lagos punishes the wrong crossing

Most delivery cities have a congested centre. Lagos has a centre on islands, reached by a handful of bridges and the expressways that feed them, with large residential and business areas on both sides.

  • The crossings. Third Mainland Bridge, Carter Bridge and Eko Bridge link the Mainland to Lagos Island; traffic towards the Island builds in the morning and back towards the Mainland in the evening.
  • The Lekki corridor. The expressway east through Lekki and Ajah is the only main road for a long stretch of homes and businesses.
  • Rain. In the rainy months, heavy downpours flood low roads and slow everything for hours.
  • Short stops, long queues. Drops are often quick, but gate access in estates and offices can add time.

The readings that matter

Traffic Flow measures the roads around each point you give it at the moment the flow runs. For a Lagos van plan, put points at the approach to each bridge, on the Island side of each bridge, at a few junctions on the Lekki corridor, and at the depot gate. Each point returns the current speed, the free-flow speed, the jam factor from 0 to 10, the congestion percentage, a level in words, how many road stretches were measured and how many are closed, and the busiest road.

Traffic incidents adds closures, roadworks and other incidents, in the city or around each drop within a distance you set. How fully incidents are reported varies from city to city, so treat a quiet result as "none reported" rather than "none".

A made-up depot day in Ikeja

Say a grocery distributor runs six vans from a depot in Ikeja, with drops on both sides of the lagoon. The figures below are invented for illustration.

  1. At 5:45 the morning check runs. Third Mainland Bridge towards the Island reads Moderate already, Eko Bridge Light.
  2. Four vans work the Mainland all day. Two Island vans leave first and cross by Eko Bridge.
  3. At 7:30 a closure is reported near two Victoria Island drops. The note goes to the driver, who does them after lunch.
  4. At 12:30 a midday check shows the Lekki corridor Heavy near Ajah. The van holding Lekki drops finishes Victoria Island first.
  5. At 15:30 the Island vans start back before the evening build-up, which the readings over past weeks showed starts towards the Mainland.

Ordering each van's drops

Route planner puts each van's drops in order from the depot, or shares the day's drops between 2 and 10 vans so each gets a compact area, with the kilometres and minutes between stops. Its times are typical, not live. For Lagos, a useful habit is to route each side of the lagoon separately: filter the drops by an Island or Mainland column first, then route each group.

What the data will not do

  • It does not count cars or tell you queue length in vehicles; it gives speeds and the jam level.
  • It has no direction split, so a slow reading on a bridge could be traffic in either direction. Place points on the approach you care about.
  • It is live. History for Lagos roads comes only from the readings you keep. Car counts by hour exist only for roads in the United Arab Emirates.
  • It does not see motorbike lanes or informal routes.

An AI employee for the morning and midday

  1. Schedule at 5:45 and 12:30 every weekday.
  2. My data brings in your bridge, corridor and depot points.
  3. Traffic Flow measures each; Sort and limit puts the most jammed first.
  4. A second branch takes today's drops, and Traffic incidents adds the nearest incident to each.
  5. xMap LLM writes a short plain note: which bridge to use, which drops to delay.
  6. The note goes to the drivers' group and a row goes to a sheet for the history.

The Road closures in my delivery zones, every hour and Road speeds outside my depots, every hour templates are good starting points. For the wider pattern of road data that runs a delivery team, see the guide to AI employees for field operations.

Questions

When is the best time to cross to Lagos Island with a van?

Outside the morning rush towards the Island and the evening rush back. Your own readings on each bridge over a few weeks show when it usually clears at your hours.

Can I see live speeds on Third Mainland Bridge?

Put a point on the approach you use and Traffic Flow returns the live speed, free-flow speed and jam factor of the roads around it each time the flow runs.

Are all incidents in Lagos reported?

Not always. Reporting varies by city, so a run with no incidents means none were reported near your points, not that the roads are clear. Check the speeds too.

Can the route planner avoid traffic?

It orders drops from typical travel times. Use the morning and midday checks to decide crossings, and route each side of the lagoon separately.

Templates that do this

Read next

More on roads and traffic · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.