FlowsBook a callSign inCreate free accountSign up
Footfall and mobility

Footfall near ferry terminals: reading the waves of each sailing

How footfall near ferry terminals rises with sailings, why commuter piers differ from tourist ones, and how to use it for a cafe, a kiosk or a feeder bus.

Part of the guide Location intelligence automation

By the xMap team · · 4 min read

Footfall near ferry terminals rises and falls with the sailings: people gather before a boat leaves, a crowd spills out when one arrives, and the hours in between can be quiet. Over a day those waves add up to a pattern you can read: a commuter pier peaks at the morning and evening crossings on weekdays, a tourist pier builds through the late morning and is busiest at weekends. That pattern decides whether a cafe, a kiosk or a connecting bus will find enough people at the hours it works.

This is for anyone who sells or plans around a pier: food and drink operators, ticket and souvenir kiosks, transport planners who run feeder buses, and terminal managers comparing piers on one network. The method uses Mobility Footfall for presence and the Weather forecast for the days crossings are at risk.

How a terminal's figures behave

Waiting is what makes a ferry terminal score highly in a measure of people-hours. Passengers arrive early, often far earlier than for a bus, and stand about until boarding. A busy pier with frequent sailings therefore looks busy most of the day, while a pier with a few long-distance sailings shows sharp peaks and long quiet stretches.

  • Commuter piers: weekdays well ahead of weekends, the busiest hour at the morning or evening crossing, a strong morning share.
  • Tourist and leisure piers: weekends ahead, the busiest hour late morning or early afternoon, a weak early morning.
  • Car ferry and long-distance terminals: peaks tied to a few departures, often with people waiting in their cars in the queue lanes, which still counts as presence.

Water around the pier holds nobody, so a wide circle mostly adds quayside offices and homes. Keep the circle tight, 200 m or less, centred on the terminal building or the waiting area.

For transport planners the same figures answer a timetable question. A feeder bus that meets the boats needs to arrive before the busiest crossing and leave after the arrivals have cleared the gangway. The busiest hour and the morning and evening shares show which crossings carry the weight, and the quietest day shows when a smaller vehicle or fewer runs would do. Compare each pier with the others on the same network, not with a rail station, since the waiting time before a sailing makes ferry figures run high.

Reading the data honestly

Footfall data starts on 17 October 2026, so the seasonal swing that matters most on many routes, summer against winter, cannot be read yet. What can be read now is the weekly shape and the change from week to week. Bad weather matters too: a week of cancelled crossings will drag the average down, so check whether storms cancelled sailings in those weeks before reading a fall as lost trade. Footfall itself arrives about 10 days after each day.

A worked example in Hong Kong, Vancouver and Copenhagen (made up)

Say a coffee brand is choosing where to put three carts on ferry piers: one in Hong Kong on a harbour crossing, one in Vancouver on a commuter route, one in Copenhagen on a harbour bus stop used by visitors. The numbers below are made up to show the method.

PierBusiest hourMorning shareBusiest dayWeekend against weekday
Hong Kong, harbour crossing18:0027%FridayAbout the same
Vancouver, commuter pier08:0039%TuesdayMuch lower
Copenhagen, harbour stop13:0016%SaturdayHigher

Made-up figures for illustration only.

For a coffee cart, Vancouver is the cleanest fit: a heavy morning on weekdays, the hours coffee sells. Hong Kong works all day and all week, so it suits a longer opening. Copenhagen's visitors arrive after lunch and at weekends; a cart there would do better selling ice cream and cold drinks than breakfast coffee, and could close on quiet weekday mornings.

Mistakes to avoid

  • A circle that reaches the next pier. Busy waterfronts have several terminals close together. A wide circle mixes them.
  • Reading a stormy week as a trend. Check the weather before blaming the pier.
  • Expecting passenger numbers. Footfall is presence in people-hours, not tickets sold. Operators' ticket data answers that.
  • Planning for summer from November figures. The data started in October 2026, so seasonal peaks are still to come.

An AI employee for a network of piers

A monthly flow keeps every pier on one list and a weather check warns operations before a rough day. It is one of the field jobs on the AI employee for field operations.

  1. A Schedule on the first day of the month.
  2. My data with your piers and their positions.
  3. Mobility Footfall on each place, 200 m, the last 30 days, with Footfall, Busy hours and Busiest days.
  4. xMap LLM to call each pier commuter, leisure or mixed, and to suggest opening hours for your cart or kiosk.
  5. Email the table to operations.

For the day-to-day side, a second flow runs each evening with the Weather forecast for each pier and a Filter on wind or rain, so the team hears the night before when crossings and trade are at risk. The Ships (AIS) block can add the ferries seen in each port area right now, for a live view of sailings.

Questions

Why do ferry terminals show high footfall even with few passengers?

Because people wait longer for ferries than for most transport, and footfall counts hours of presence, not heads.

Can I see each sailing in the data?

Not one by one. You get the busiest hour, how the day splits into four parts, and the busiest and quietest days, which show the main crossings.

Can I compare summer with winter?

Not yet. Footfall data starts on 17 October 2026, so seasonal comparisons will come once a full season has passed.

What radius suits a ferry pier?

About 200 m around the terminal building or waiting area. Wider circles pull in other piers and nearby buildings.

Templates that do this

Read next

More on footfall and mobility · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.