FlowsBook a callSign inCreate free accountSign up
Workflows by industry

How cruise terminals and port cities plan around ship arrivals

Cruise ship arrival tracking from AIS, with live road speeds near the terminal and footfall in the streets around it, so shuttles, guides and staff are ready on time.

Part of the guide Workflow automation

By the xMap team · · 5 min read

Cruise ship arrival tracking is most useful when it answers a practical question an hour or two ahead: which passenger ship has just crossed into the port approach, how are the roads around the terminal moving right now, and how busy do the nearby streets usually get on a call day? The first part comes from AIS, the signal every large ship sends with its position. The second comes from live road speeds. The third comes from footfall, which you build up as a record over the coming weeks.

This article is for terminal operations teams, port shuttle and coach companies, tour operators and city tourism offices. It explains each of the three signals, how to combine them, an invented example in Lisbon, the mistakes to avoid, and how an AI employee keeps watch.

Seeing the ship arrive

The Ships (AIS) block listens to the live AIS stream over an area you draw, for 30, 60 or 90 seconds, and keeps the last position heard for each ship: its name, type, speed, status, stated destination and ETA, and its length. Keeping only the Passenger type removes cargo ships, tugs and fishing boats.

On its own that gives you a snapshot. The Zone alert block adds memory: it remembers where each ship was at the last check and reports the ones that entered or crossed a zone since then. Draw the zone across the river mouth or the approach channel, check every 15 minutes, and you hear about each arrival once.

The roads around the terminal, right now

When a large ship's passengers come ashore together, the streets by the terminal fill with coaches and taxis. The Traffic Flow block measures how the traffic is moving on the roads around each place you give it: the current speed, the speed when the road is free, the jam factor from 0 to 10, and the busiest road. It measures speed, not the number of vehicles, and it is live: the reading is taken when the flow runs. Point it at the terminal gate, the coach park and the taxi rank, and run it as the ship comes in.

Footfall: what to measure from now on

Mobility Footfall shows how busy the area around a place is, as people-hours of presence per day, with the busiest hour and day. It is not a count of visitors, and each day arrives about 10 days later. xMap's footfall history only starts in mid-October 2026, so there is no last season to compare with yet. What a terminal can do is start the record now:

  • Keep a list of call days and the ships that called.
  • Read footfall around the terminal, the old town streets and the main tram stops each week.
  • After a few months, compare call days with quiet days in the same weeks, and see which streets fill and at what hour.
  • Use that to place pop-up information points and to time shuttle frequency.

Trips data, which shows where visitors come from, is measured only in Sao Paulo so far, so most cities will work from presence alone.

An example, made up for this article

Say a coach operator in Lisbon runs transfers from the cruise terminal to the airport and the city sights. It draws a zone across the mouth of the river, keeps passenger ships, and checks every 15 minutes. When a ship enters, the dispatcher gets an email with its name, length and the ETA it reports. A second flow checks road speeds by the terminal gate and the coach park every 30 minutes on call mornings.

TimeEventRoad by the gateAction
06:45Passenger ship entered the zoneFree flowingCoaches leave the depot
07:30Ship alongsideLightFirst transfers loading
08:15Passengers ashoreHeavy, jam factor 7Coaches told to use the side gate

Invented events and readings, to show how the signals are used together.

Mistakes that make arrival alerts less useful

  • A zone that is too big. Ships in passing get reported. Draw tightly across the approach the cruise ships use.
  • Trusting the ETA. It is the crew's own entry. Use the zone crossing as the fact and the ETA as a hint.
  • Expecting car counts. Traffic Flow gives speeds and congestion, not vehicle numbers.
  • Comparing seasons too early. Footfall history is only weeks old. Collect first, compare later.

The AI employee on watch

In xMap Flows the arrival watch is one flow:

  1. Schedule: every 15 minutes between 05:00 and 11:00.
  2. Area of interest: the approach, drawn on the map.
  3. Ships (AIS): Passenger only, a 90-second listen.
  4. Zone alert: entered or crossed.
  5. Email to the dispatcher, or a message to the guides' channel.

A second flow reads your terminal points from My data, adds Traffic Flow, and posts the road speeds every 30 minutes on call mornings; a third, weekly, adds Mobility Footfall to build the record. The cruise ships arriving at the port template is the arrival watch, ready to use, and ships entering my zone is the general version. For the wider picture of data that runs on a timetable, see location intelligence automation.

Questions

Can it tell me how many passengers are on board?

No. AIS gives the ship's name, type, size, position, speed and stated destination, not its passengers. The ship's length is a rough clue to its size.

How early will I hear about an arrival?

As soon as a ship crosses the zone you drew and the next check runs. Draw the zone further out for more warning, and check every 15 minutes.

Does Traffic Flow count coaches and taxis?

No. It measures speeds and congestion on the roads around each point, live, never vehicle counts.

Can I compare this season's footfall with last season's?

Not yet. Footfall history begins in mid-October 2026 and each day arrives about 10 days late, so start recording now and compare once you have months of call days.

Templates that do this

Read next

More on workflows by industry · Every article · Templates

Put it to work

An AI employee in xMap Flows does this on live data, on its own timetable. Start from a template or describe it in plain words.