Choosing a day care centre location on the way to work
A day care centre location works when it sits on the parents' morning route: young children within a short trip, few rival centres with spare places, and easy drop-off roads.
Part of the guide AI employee for site selection
The best day care centre location is on the route parents already drive or walk every weekday morning, inside a short trip of enough young children, and away from rival centres that still have free places. Parents rarely cross town for childcare: they choose what sits between home and work, with somewhere to stop for two minutes at the door. So check three things for every address: how many young children live within reach, how many centres already serve them, and how the roads in front behave at drop-off time.
This guide is for owners opening a first centre, operators adding a second or third, and property teams screening units for a childcare tenant. It walks through the morning trip, counting children honestly, reading rival centres, a made-up comparison in Melbourne, and an AI employee that checks every unit a landlord sends you.
Why the morning trip decides it
Most local shops win customers from the people who live around them. A day care centre wins them from the people who pass it. A parent leaving a suburb at 7:40 for an office across the river wants the centre on that line, ideally on the outbound side of the road so there is no U-turn in heavy traffic. A unit two streets off the main road may look cheaper and quieter, yet parents will pick a centre they can reach without a detour.
That changes how you draw the area around a site. A plain circle treats every home the same. A drive or walk along the roads, drawn from the site, shows the homes that can really reach you within ten minutes. In a dense inner suburb a 10-minute walk is the honest reach; on the edge of a city it is a 10 to 15-minute drive. For more on the choice between the two, see a radius or a drive time.
Counting the young children who could come
Residents by age come from xMap's population grid through the Demographics block. It gives nine age groups, and the youngest is 0 to 9 years. That group mixes babies with primary school children, so treat it as a guide to how family-heavy an area is, not as a count of children who need a place. Two areas with the same 0 to 9 figure can differ a lot if one is full of new flats and the other of older family homes.
- Compare like with like. Read the share of residents aged 0 to 9 at each candidate site, inside the same travel area, and rank the sites against each other.
- Look at the working-age groups too. Many adults aged 30 to 39 next to many young children usually means parents who work and need care.
- Know where the figures exist. Population figures are available only in some countries, among them France, Canada, India, Thailand, Egypt and Australia; not the United Kingdom or the United States. Elsewhere, lean on local census tables you already hold.
Rival centres and the places they still have
The Nearby places block counts what already serves those families. The places database has types such as Day care center, Preschool, Kindergarten and Child care agency, and you can pick several in one block. Each place comes with its distance, rating, number of reviews and whether it belongs to a chain.
A count alone can mislead. Ten centres around a site sounds crowded, yet if every one of them has a waiting list, the area is short of places, not full. The database does not know about waiting lists, so ring a few of the nearest centres and ask. Ratings help you judge the field: a cluster of well-rated, long-reviewed centres is a hard place to win parents from, while a few thinly reviewed ones leave room for a newcomer who earns trust quickly.
The roads in front of the door
Drop-off is a short, stressful stop. Traffic Flow reads the roads around each site at the moment the flow runs: the current speed, the free-flow speed, the jam factor from 0 to 10 and the busiest road nearby. Run it at 7:45 on a weekday and you see what parents will meet. It measures speed, never the number of cars, so it tells you whether a road crawls at drop-off, not how many drivers pass.
Pair it with what you see on a visit at the same hour: is there a lay-by, a side street with short-stay parking, a safe crossing for parents who walk? A main road that moves at a slow, steady speed can be better for drop-off than a fast dual carriageway where nobody can stop.
A worked example in Melbourne
A made-up case. An operator in Melbourne has two leases on offer, one on a busy arterial road towards the city and one in a quiet shopping strip. All the figures below are invented, to show how the reading works.
| Arterial road unit | Shopping strip unit | |
|---|---|---|
| Residents aged 0 to 9 in a 10-minute drive | 6,800 | 7,400 |
| Day care centres and preschools in the same area | 9 | 14 |
| Average rating of those centres | 4.1 | 4.6 |
| Jam factor in front at 7:45 | 6.2 | 1.8 |
| On the city-bound side of the road | Yes | Not on a through route |
Made-up figures, for illustration only.
The shopping strip has slightly more young children but far more centres, and well-rated ones. The arterial unit has fewer rivals and sits on the side parents drive towards work, even if traffic there is slow. Slow is acceptable if there is a safe place to stop; the operator checks the side street on a Tuesday morning before signing.
Mistakes that cost a lease
- Choosing the cheapest unit in a residential street that no commuter passes.
- Reading the 0 to 9 group as the number of children who need care.
- Counting only centres with the same name type and missing preschools that parents treat as the same choice.
- Checking the roads at noon, when the drop-off hour is what matters.
- Forgetting to call the nearest centres about their waiting lists.
An AI employee that screens every unit
When agents keep sending addresses, let an AI employee check each one the same way. Here is a flow you can build in a few minutes; it works around the site selection approach used across xMap Flows.
- Put the candidate addresses in a table on the My data page, or let a Form page take them from your agents.
- Add Travel area for a 10-minute drive or walk from each address.
- Add Demographics to read residents by age inside each area.
- Add Nearby places for day care centres, preschools and kindergartens, set to pass on each site with its counts.
- Add Traffic Flow, and schedule the flow for a weekday at 7:45 so the speeds are the drop-off speeds.
- Add xMap LLM to rank the sites and write two lines on each, then Email the ranked list to you.
The Where to open a nursery template starts you with most of these blocks in place, and Where children are far from a paediatrician shows the same family-focused counting for health services.
Questions
How far will parents travel to a day care centre?
Usually only as far as a short detour from their commute allows. Read reach as a 10-minute walk in dense areas or a 10 to 15-minute drive on the edge of a city, drawn along the roads.
Can xMap tell me how many children are under five?
No. The youngest age group in the population grid is 0 to 9 years, so use it to compare how family-heavy areas are, not as a count of children needing care.
Does Traffic Flow show how many cars pass the site?
No. It shows live speeds and the jam factor on the roads around a site at the moment the flow runs, never car counts. Run it at drop-off time to see what parents will meet.
Which rival types should I count?
Count the types parents compare with you: Day care center, Preschool, Kindergarten and Child care agency are all in the places database and can sit in one Nearby places block.
Is population data available for my city?
Only in some countries, among them France, Canada, India, Thailand, Egypt and Australia. The United Kingdom and the United States are not covered yet.
Templates that do this
Read next
More on site selection and expansion · Every article · Templates